Acer IPIMB-AR (Rev 1.02A) is an OEM motherboard typically found in Acer and Gateway desktop systems like the Aspire M3985 Predator G3620 Gateway DX4870 The Retro Web
Because this is an OEM component, a standalone "motherboard manual" was never publicly released by Acer Acer Community
. To find the closest official documentation, you must search the Acer Support Portal using your computer's Serial Number rather than the motherboard model Essential Technical Specifications Intel B75 Express LGA 1155 (Supports Sandy Bridge & Ivy Bridge CPUs) 4x DDR3 DIMM slots; Max 16GB (1333 MHz non-ECC) 1x PCIe x16 (3.0 with Ivy Bridge), 3x PCIe x1 2x SATA III (6Gb/s), 4x SATA II (3Gb/s) Form Factor Official Documentation Links
I understand you're looking for a manual link for the Acer IPIMBAR REV 102A (likely a motherboard from an Acer desktop, often used in models like the Aspire M3800 or similar). However, instead of a direct link (which can change or become outdated), I can give you a short, helpful "story" to guide you to the right place.
Once upon a troubleshooting evening, Alex found an old Acer desktop in the closet—the one with the IPIMBAR REV 102A motherboard. The fans spun, but the screen stayed black. A manual was needed.
Instead of wandering through broken forum links from 2009, Alex remembered:
Within minutes, Alex found a clear diagram: clear CMOS jumper (JBAT1), front panel pinout, and RAM slot order. The PC lived again—and no sketchy driver sites were visited that day.
Moral: Don't search for "IPIMBAR REV 102A manual" alone. Search by the PC model (e.g., Aspire M3800) + "service guide." That's where the real motherboard details hide.
Finding a formal service manual for the Acer IPIMB-AR (Rev 1.02A) motherboard is difficult because Acer typically does not release these manuals to the public. However, you can find detailed technical specifications and header pinouts through community-maintained archives and product spec sheets. Manual & Specification Links
Detailed Technical Specs: This document includes a comprehensive breakdown of the Acer IPIMB-AR Specs, covering CPU support, memory configurations, and rear panel details.
Pinouts & Jumper Info: For specific board layout details like front panel headers or clear CMOS jumpers, the Retro Web's IPIMB-AR Page provides chipset and board data for this specific model.
Official Acer Support: You can search for generic user manuals (which often cover the whole PC case/setup rather than just the motherboard) by entering your SNID or serial number on the Acer Support Page. Key Hardware Specifications
This board was commonly used in the Gateway DX4870 and Acer Aspire M3985 systems.
Socket/CPU: LGA 1155; supports 2nd and 3rd Gen Intel Core i3, i5, and i7 (Sandy Bridge and Ivy Bridge). Chipset: Intel B75 Express.
Memory: 4x DDR3 DIMM slots; supports up to 16GB of DDR3 1333 MHz. Expansion: 1x PCIe 3.0 x16 and 3x PCIe 2.0 x1 slots. Storage: 2x SATA III (6Gb/s) and 4x SATA II (3Gb/s) ports. Helpful BIOS Tips
Finding a dedicated, official manual for the Acer IPIMB-AR REV: 1.02A Go to product viewer dialog for this item.
motherboard can be difficult as Acer generally does not publicly release service manuals for their OEM boards. However, the board was commonly used in Acer Aspire G3620, DX4870, and M1935 systems.
Based on technical summaries, here are the specifications and information resources for this board: Key Specifications Chipset: Intel B75 Express.
Socket: Intel LGA 1155 (Supports Sandy Bridge and Ivy Bridge processors). Memory: 4 DIMM slots supporting DDR3 1333/1600 MHz SDRAM. Expansion Slots: 1x PCIe 3.0 x16, 3x PCIe 2.0 x1.
Storage: 2x SATA III (6.0 Gb/s) ports, 4x SATA II (3.0 Gb/s) ports. Form Factor: Micro-ATX. Information & Resource Links
Motherboard Specifications: A summary of specs is available on Scribd.
Technical Details & Drivers: The Retro Web provides detailed technical specs and chip documentation.
Acer Community Support: Discussions regarding BIOS updates and GPU upgrades for this board can be found on the Acer Community.
General Manual: A generic Acer user manual (not specifically for this motherboard, but for Acer systems) can be found at the official Acer website.
Note: The best way to get drivers for this board is to search the Acer Support site using the model number of the desktop it came in, such as "Aspire G3620".
If you can tell me why you are looking for the manual (e.g., trying to identify front panel pin headers, looking for a BIOS update, or upgrading RAM), I can provide more specific instructions.
Acer IPIMB-AR Rev 1.02A is a Micro-ATX motherboard commonly found in Gateway and Acer desktop systems like the Gateway DX4870 Acer Aspire M3985 Predator G3620
. Because it is an OEM (Original Equipment Manufacturer) part, a dedicated retail "manual" is not publicly available from Acer's official support site. Acer Community Direct Support Resources Driver & BIOS Downloads
: You can search for updates by entering your serial number or SNID on the Acer Support Drivers and Manuals page Alternative Manuals : For general system operation, you can refer to the Acer Generic Desktop User Manual Technical Specifications
For users looking for pinout or compatibility details usually found in a manual, the following specs are confirmed for this board: Specification Form Factor LGA 1155 (Supports Sandy Bridge and Ivy Bridge CPUs) Intel B75 Express 4x DDR3 DIMM slots (supports up to 16GB at 1333 MHz) 2x SATA III (6Gb/s) and 4x SATA II (3Gb/s) ports 1x PCIe 3.0 x16 and 3x PCIe 2.0 x1 slots HDMI, VGA, 2x USB 3.0, 4x USB 2.0, RJ45 LAN, and Audio Installation & Troubleshooting Tips Front Panel Connectors acer ipimbar rev 102a manual link
: As a standard OEM board, it uses a front panel header for power/reset switches and LEDs. If you are moving this board to a new case, documentation on the specific pinout can sometimes be found in archived community threads or by checking the motherboard summary on Scribd BIOS Updates
: Users have reported needing BIOS updates to support newer graphics cards like the GTX 1050 Ti. Be cautious, as many older Gateway/Acer models have limited BIOS support for modern UEFI-only GPUs. Hardware Compatibility
: It supports Ivy Bridge (Core i7-3770, i5-3570) and Sandy Bridge (Core i7-2600, i5-2500) processors with a maximum TDP of 95W. Acer Community for the front panel or a BIOS download for a specific PC model?
Official service manuals for the Acer IPIMB-AR (Rev 1.02A) Go to product viewer dialog for this item.
are generally not released to the public by Acer, as they are typically used in pre-built systems like the Gateway DX4870 , Acer Aspire M3985 , and Predator G3620
. However, detailed technical specifications and layout information can be found through community resources and archival sites. 📄 Manual and Specification Links
Technical Specifications: Detailed specs covering CPU support, memory limits, and expansion slots are available on Scribd.
Motherboard Overview: The Retro Web provides a comprehensive database entry for this board, including chipset details and compatible components.
Official Acer Support: For system-level documentation (which may include basic motherboard diagrams), visit the Acer Support Drivers and Manuals page and enter your desktop's SNID or serial number.
Community Support: Discussions regarding pinouts and manual searches for this specific board can be found on the Acer Community. 🛠️ Key Technical Specifications The Acer IPIMB-AR
(manufactured by Pegatron) is a Micro-ATX motherboard designed for the Intel LGA 1155 socket. Chipset: Intel B75 Express.
CPU Support: Intel 2nd and 3rd Generation (Sandy Bridge and Ivy Bridge) Core i3, i5, and i7 processors (up to 95W TDP).
Memory: 4 DIMM slots supporting up to 16GB of DDR3 1333/1600 MHz non-ECC unbuffered memory. Expansion: 1 x PCI Express 3.0 x16 slot. 3 x PCI Express 2.0 x1 slots.
Storage: 6 SATA ports total (2 x SATA III 6Gb/s and 4 x SATA II 3Gb/s).
Rear I/O: Includes HDMI, VGA, 2 x USB 3.0, 4 x USB 2.0, Gigabit Ethernet, and standard Audio I/O. Acer IPIMB-AR - The Retro Web
The Acer IPIMB-AR Rev 1.02A motherboard is an OEM component primarily used in Gateway DX4870, Acer Aspire M3985, and Predator G3620 desktop systems.
Because it is an OEM part, Acer does not provide a standalone "motherboard manual". To find official documentation, you must search for the full system manual of the computer model it came in (e.g., Gateway DX4870) on the Acer Support Website. Quick Technical Specifications
If you are looking for specific hardware limits, use these confirmed specs:
I couldn’t find a direct manual link for an “Acer iPimbar rev 102a” — it’s possible the name is misspelled or refers to an internal component (e.g., a motherboard, embedded controller, or sensor board) rather than a complete Acer product.
Could you please double-check the spelling? You might be looking for:
DA0Z8KMB8E0 REV:E or similarIf you can provide:
…I can give you the exact support page and manual link from Acer’s official site.
In the meantime, here’s how to find it yourself:
https://www.acer.com/ac/en/US/content/supportLet me know the corrected name or serial, and I’ll locate the manual for you.
Official service manuals for the Acer IPIMB-AR (Rev 1.02A) motherboard are generally not made public by Acer. However, you can find a comprehensive Motherboard Specifications Document
on Scribd that outlines key pinouts, CPU support, and technical details. Acer Community Official Acer Support
For general user guides and driver updates, you can use the official Acer Support Portal . To find documentation specific to your machine: Acer Drivers and Manuals Enter your Serial Number Product Model
(this motherboard is often found in Gateway DX4870 or specific Acer Aspire desktop models). Select the tab to download the available User Manual. Acer Community Technical Specifications Summary
If you are looking for manual details to troubleshoot or upgrade, here are the core specs for the Rev 1.02A board: Intel B75 Express. CPU Support: Acer IPIMB-AR (Rev 1
Intel Socket LGA 1155; supports Ivy Bridge and Sandy Bridge Core i3/i5/i7 (up to 95W).
If you have salvaged this motherboard for a custom build, you may encounter a few hurdles not explained in the standard manual.
You do not need a manual to know that pre-builts are restrictive. Here is the upgrade cheat sheet based on the board's schematics:
Due to the proprietary nature of OEM motherboards, the "manual" is often distributed as a schematic diagram or integrated into the PC's Service Guide rather than a standalone consumer user manual.
A. Schematic Diagram (Most Detailed Resource) For technicians requiring pinouts, voltage regulators, or circuit paths:
"Pegatron IPIMB-AR schematic pdf"
B. Service Guide (User Manual Equivalent) For users looking for jumper settings, port locations, or upgrade limits:
Finding a live Acer IPIMBAR Rev 102A manual link is difficult because Acer treats motherboards as disposable parts. However, as of this writing, the Aspire TC-705 support page remains active.
Final action items:
If you need a direct copy of the pinout diagram or the BIOS recovery steps, leave a comment below. For everyone else, bookmark this article—because next time your Acer PC won’t turn on, you will need that Rev 102A pinout before you throw it out the window.
Disclaimer: Acer, Aspire, and IPIMBAR are trademarks of Acer Inc. This guide is for informational purposes. Always ground yourself when working on PC hardware.
While a standalone official manual for the Acer IPIMB-AR (rev 1.02a)
is not publicly released by Acer, this motherboard is most commonly found in Gateway DX4870 Acer Predator G3620 Acer Aspire M1935/M3985
You can find technical specifications and front-panel pinout details through community-maintained documentation and technical forums: Technical Documentation & Specs Motherboard Specifications Summary
: A technical overview including CPU support (LGA 1155), chipset (Intel B75), and expansion slots is available on Scribd - Acer IPIMB-AR Specs Hardware Database : For BIOS versions and driver information, see the The Retro Web - Acer IPIMB-AR Front Panel Header Pinout
If you are looking for the manual to connect power/reset buttons or LEDs, the pinout follows a standard layout where the odd-numbered pins are closest to the PCI slots and the even-numbered pins are closest to the motherboard edge. Pin Numbers Pin 1 (+) / 3 (-) Polarity matters Pin 2 (+) / 4 (-) Polarity matters Power Switch Polarity does not matter Reset Switch Polarity does not matter Pin 12 / 14 Connects sideways Hardware Compatibility Highlights CPU Support : Supports Intel Ivy Bridge Sandy Bridge processors up to 95W (e.g., Core i7-3770, i5-3570). : 4 DIMM slots supporting up to (some reports suggest 32GB) of DDR3 1333 MHz. Form Factor : Standard (244 x 244 mm). Are you trying to rehouse this board into a new case, or are you troubleshooting a specific boot error Acer IPIMB-AR - The Retro Web
DRAFT REPORT
SUBJECT: Sourcing and Verification of Documentation for the "Acer IPIMB-AR Rev 1.02A" Motherboard
DATE: October 26, 2023 TO: User / Technical Support Team FROM: AI Research Assistant
The single most important reason to download the Acer IPIMBAR Rev 102A manual link is the Front Panel Header.
On a standard motherboard, the power switch, reset switch, HDD LED, and power LED are separate 2-pin connectors. On the Rev 102A, Acer used a proprietary 14-pin dual-row header.
The Acer IPIMBAR Rev 102A has three notorious weak spots that the service manual addresses:
A direct link for a "Rev 1.02A" manual does not exist because the documentation
Official retail manuals for the Acer IPIMB-AR (Rev 1.02A) motherboard are not publicly released by Acer, as this board was primarily used in pre-built systems like the Acer Predator G3620 Gateway DX4870 Acer Aspire M1935 Acer Community
However, you can find complete technical specifications and internal header layouts through third-party repositories like The Retro Web Motherboard Specifications Form Factor:
LGA 1155 (Supports Intel 2nd Gen "Sandy Bridge" and 3rd Gen "Ivy Bridge" Core i3/i5/i7 up to 95W) Intel B75 Express
4x DDR3 DIMM slots, Dual Channel, max 16GB (standard) or up to 32GB depending on BIOS Expansion Slots: 1x PCIe 3.0 x16, 3x PCIe 2.0 x1 2x SATA III (6Gb/s), 4x SATA II (3Gb/s) The Retro Web Internal Headers & Pinouts
If you are performing a case swap, these headers are the most critical: Front Panel Header:
Contains pins for the power button, reset switch, and LED indicators. Audio Header: 1x Front Audio header for headphone/microphone jacks. USB Headers: 2x internal USB 2.0 headers.
1x 4-pin CPU Fan connector and 1x 3-pin System/Rear Fan connector. Manual Links Technical Overview: Acer IPIMB-AR Specs (Scribd) Database Record: Acer IPIMB-AR - The Retro Web Acer Official Support: Once upon a troubleshooting evening, Alex found an
You can search for the desktop model (e.g., "Predator G3620") on the Acer Drivers and Manuals page
to find general system guides, though they typically omit detailed motherboard pinouts. front panel pinout specifically to connect a new case power button? Spin1 - USER'S MANUAL - Acer
Official standalone service manuals for the Acer IPIMB-AR motherboard are not publicly available. Because this is an OEM motherboard originally manufactured for pre-built desktop towers like the Gateway DX4870, Acer does not publish separate motherboard manuals.
However, you can easily access the general desktop user manuals and specific hardware layout breakdowns through alternative methods. 📄 Accessing General Manuals & Specs
Search Acer Support: To download the overall system documentation, visit the Acer Support Country Selector. You will need to input the serial number or model name (e.g., Gateway DX4870) from the physical computer tower sticker.
View the Unofficial Specification Sheet: A full, detailed technical breakdown of this exact motherboard is hosted by community members in a document found on Scribd . 🔌 Core Hardware Specifications
If you are looking for the manual to double-check compatibility or connect cables, here are the core board specifications for the Acer IPIMB-AR Rev 1.02A: Form Factor: Micro-ATX
CPU Support: Intel Core i3, i5, and i7 processors (Ivy Bridge & Sandy Bridge) Socket: LGA 1155 Chipset: Intel B75 Express
Memory Slots: 4 x DDR3 DIMM slots (Max 16GB total at 1333 MHz)
SATA Connectors: 2 x SATA III (6Gb/s) and 4 x SATA II (3Gb/s)
Front Panel Connection: Standard 1 x Front Panel header for your power button, reset button, and front-facing LED indicators. Acer IPIMB-AR Motherboard Specs | PDF - Scribd
Complete Guide to the Acer IPIMB-AR Rev 1.02A Motherboard The Acer IPIMB-AR Rev 1.02A is a Micro-ATX motherboard frequently utilized in pre-built desktop systems from the early 2010s. If you are looking for an Acer IPIMBAR Rev 102A manual link, it is important to note that as an OEM (Original Equipment Manufacturer) part, dedicated standalone manuals are rare. Instead, documentation is typically found within the user guides for the specific desktop models it powers. Where to Find the Manual Link
Because this motherboard is an OEM component, Acer does not typically provide a separate "motherboard-only" manual on its main support site. To find the relevant documentation and drivers, you should use the Acer Support Drivers and Manuals page.
Search by Desktop Model: Look for the manual for the following systems known to use this board: Acer Aspire M1935 Acer Aspire G3620 Gateway DX4870
Automatic Identification: Use the Acer Product Registration tool or the Acer identification tool on the support page to automatically detect your serial number or SNID. Core Specifications
The Acer IPIMB-AR Rev 1.02A is built on the Intel B75 Express chipset. It is a versatile board for its era, supporting both 2nd and 3rd Generation Intel processors. Socket: LGA 1155.
Processor Support: Supports Intel Core i3, i5, and i7 (Sandy Bridge and Ivy Bridge architectures) up to a 95W TDP.
Memory: 4x 240-pin DDR3 DIMM slots. While some official specs suggest a 16GB limit, many users report successful upgrades to 32GB. Audio: Realtek ALC662 High Definition Audio.
Expansion: Typically includes PCIe x16 for dedicated graphics and multiple SATA ports (a mix of SATA II and SATA III depending on the specific revision). Common Troubleshooting and BIOS Access
Many users seeking this manual are looking for front panel header diagrams or BIOS recovery options. Acer IPIMB-AR - The Retro Web
Direct documentation for the Acer IPIMB-AR Rev 1.02a Go to product viewer dialog for this item.
motherboard is not publicly available as a standalone PDF from Acer, as they typically only release full system manuals. However, the board was used in systems like the Acer Predator G3620 Go to product viewer dialog for this item. , Gateway DX4870 Go to product viewer dialog for this item. , and Aspire M1935 Go to product viewer dialog for this item. .
You can find official system-level manuals on the Acer Support Page by entering your computer's SNID or serial number. Motherboard Guide & Specifications
For technical assembly, use these crowdsourced specifications derived from The Retro Web and Scribd documentation:
Socket & Chipset: LGA 1155 socket with Intel B75 Express chipset.
CPU Support: Supports 2nd (Sandy Bridge) and 3rd (Ivy Bridge) Gen Intel Core i3/i5/i7 processors up to 95W TDP.
Memory: 4 x 240-pin DDR3 DIMM slots; supports up to 16GB of dual-channel DDR3 1333/1600 MHz non-ECC unbuffered memory. Expansion Slots: 1 x PCIe 3.0 x16 (3.0 requires Ivy Bridge CPU). 3 x PCIe 2.0 x1.
Storage: 2 x SATA III (6Gb/s) and 4 x SATA II (3Gb/s) ports. Form Factor: Micro-ATX. Front Panel Header Pinout
The front panel header follows a standard 9-pin layout (the 10th pin is missing as a "key"): Download User's Manual for your Acer Product
Note on Revisions: Hardware revision numbers (such as Rev 1.02A) usually indicate minor changes in components (e.g., capacitor suppliers, minor circuit path adjustments) that do not alter the user-facing functionality or the port layout. Therefore, the standard IPIMB-AR manual applies to this revision.