Adjustment Program Epson 1390 Resetter _best_

How to Use the Epson 1390 Resetter (Adjustment Program) to Fix Waste Ink Pad Errors

If you own an Epson Stylus Photo 1390, you know it’s a workhorse capable of printing stunning high-quality photos. However, like all inkjet printers, it has a lifespan built into its internal software. One day, seemingly out of nowhere, you might turn on your printer only to be greeted by two flashing red lights and a message on your computer screen saying: "Service Required" or "The Printer's Ink Pads are at the end of their service life."

Don't panic. You don't necessarily need a technician, and you don't need to throw the printer away. The solution is likely a simple software fix using the Epson 1390 Adjustment Program (Resetter).

In this guide, we will walk you through what the resetter is, how to use it safely, and the crucial physical step many tutorials forget to mention.

✅ (Recommended) Physically clean or replace the waste ink pads

• The pads are located under the right side of the printer (inside the base). You can wash and dry them (messy) or buy a replacement pad kit. Alternatively, install an external waste ink tank (permanent solution).

My Printer Still Shows the Error – Why?

• Wrong program version: Some clones only work with specific firmware revisions.
• Did not run as Administrator: Right-click and select “Run as administrator”.
• Physical pad is fully saturated: If ink is pooling under the printer, the sensor (if present) may have tripped – you must replace pads.

Troubleshooting

• Tool doesn’t detect printer: verify drivers, USB cable, power state; try another USB port and restart PC/printer.
• Reset fails or shows error: note error codes/messages; try running as Administrator, reinstall drivers, or use different version of the tool.
• Printer still shows error lights after reset: power cycle the printer; if persistent, mechanical service may be needed (waste pad replacement, optical sensors).
• After reset, if ink overflow occurs or prints poorly: inspect/replace waste ink pads, clean printhead, and check ink cartridges.

Waste Ink Pad Replacement (brief)

• Accessing waste pads on the Epson 1390 typically involves opening the top cover and possibly removing some screws and the service cover.
• Replace or clean pads with appropriate absorbent material; allow parts to dry completely before reassembly.
• After physically servicing pads, perform the waste ink pad counter reset described above.

Step 5: Initialize (Reset)

• Click the "Initialization" button.
• A confirmation dialog will appear: "Are you sure you want to initialize the waste ink counter?" Click Yes or OK.
• Wait 5 seconds. You will see a progress bar.
• A final dialog box will say: "Initialization of the waste ink pad counter is completed."

Step 3: Select the Specific Adjustment

• The main menu appears. Look for a button labeled "Particular adjustment mode" (or simply "Waste ink pad counter" depending on the version).
• Click the tab or button that says "Waste ink pad counter."

Step 4 – Run the program as administrator

• Right-click AdjProg.exe → Run as administrator.

Example concise workflow (prescriptive)

1. Backup any printer settings if possible.
2. Turn off printer, connect USB, turn on printer.
3. Run adjustment tool as Admin; select Epson 1390.
4. Read waste ink counter; if over limit, reset it.
5. Power cycle printer; run nozzle check and head cleaning.
6. If ink leak or overflow suspected, replace waste pads; then reset counter again.

If you want, I can:

• provide specific filenames and typical UI labels used by common Epson 1390 resetter tools,
• give a step‑by‑step guide for physically replacing the waste ink pad on an Epson 1390, or
• draft a short troubleshooting checklist for specific error lights.

The Adjustment Program for the Epson 1390, often called a "Resetter," is a diagnostic utility used primarily to bypass "Service Required" errors that occur when the printer's internal waste ink pad counter reaches its limit.

While essential for extending the life of the Epson Photo 1390, especially when used in DTF (Direct to Film) or DTG (Direct to Garment) setups, it is technically an unofficial service tool for end-users. Core Features & Functions

The software provides several maintenance modes beyond just resetting counters:

Waste Ink Pad Counter Reset: The most common use case; it resets the internal "protection counter" to 0% so the printer can resume operation.

EEPROM Operations: Allows users to read, write, or initialize the printer's EEPROM settings, which is useful for mainboard repairs or backups.

Print Head Maintenance: Includes functions for "Deep Cleaning" and "Ink Charging" to clear stubborn nozzle clogs.

Calibration & Alignment: Provides tools for Bi-D (Bi-directional) adjustment, top margin adjustment, and head ID setting to maintain print quality. Critical Usage Requirements

Using the Epson 1390 Resetter often requires specific system conditions: How to Reset Epson SP 1390 Printer

Epson Stylus Photo 1390 Adjustment Program is a specialized utility used primarily to reset the "Waste Ink Pad Counter" when a printer displays a "Service Required" error. This error occurs when the internal ink pads, which soak up excess ink during cleaning cycles, are digitally flagged as "full" based on a preset page count. Core Functionality Waste Ink Reset:

Clears the internal counter to 0%, allowing the printer to resume operation. Maintenance Tools:

Allows users to perform print head alignments, read detailed error codes, and back up or restore the mainboard's EEPROM. System Checks:

Provides technical status reports and hardware ID information for troubleshooting. How to Reset Epson SP 1390 Printer

Adjustment Program Epson 1390 Resetter: The Ultimate Guide to Fixing Service Required Errors Adjustment Program Epson 1390 Resetter

"Service Required" is a message that every Epson Stylus Photo 1390 owner dreads. Just when you need to print a high-quality A3 photo, your printer suddenly stops, and the red lights begin to flash alternately. This isn't a mechanical failure; it is a programmed safety limit.

To get your printer back to work, you need the Epson 1390 Adjustment Program (Resetter). In this guide, we will walk you through what this software is, why you need it, and how to use it safely. What is the Epson 1390 Adjustment Program?

The Epson 1390 Adjustment Program is a specialized utility tool used by technicians to maintain and repair Epson printers. Its most common use for home and office users is resetting the Waste Ink Pad Counter.

Every time you print or clean your print head, a small amount of ink is pumped into internal sponges called waste ink pads. Epson printers use a built-in counter to track this. Once the counter reaches 100%, the printer locks itself to prevent ink from overflowing and damaging the internal electronics. Common Symptoms of a Full Counter

Before you download the resetter, ensure your printer is actually experiencing a "Counter" issue. The signs include:

Status Monitor Message: A popup on your computer says "Service Required."

Flashing Lights: The Power light, Paper light, and Ink light flash alternately (one after the other).

Total Lockout: The printer refuses to perform any functions, including scanning or cleaning. How to Use the Epson 1390 Resetter (Step-by-Step)

Note: Before starting, disable your Antivirus temporarily, as many security programs flag reset utilities as "False Positives" because they interact with hardware ports.

Connect Your Printer: Ensure your Epson 1390 is connected to your PC via a USB cable and turned on. Run the Software: Open the AdjProg.exe file.

Select Model: Click the "Select" button. Choose Stylus Photo 1390 from the model list and click OK.

Enter Maintenance Mode: Click on "Particular Adjustment Mode."

Waste Ink Pad Counter: Scroll down the list, select "Waste ink pad counter," and click OK.

Check the Status: Click the "Check" button. This will show you the current percentage and point count.

Reset: Check the box next to "Main pad counter" and click "Initialization."

Power Cycle: A popup will tell you to turn off your printer. Turn the printer off, then click OK. Turn the printer back on. How to Use the Epson 1390 Resetter (Adjustment

Your printer should now be back to its normal state with a 0% counter! Important Warning: The Physical Hardware

Resetting the software is only half the battle. Because the printer "thinks" the ink pads are empty, you must remember that the physical pads are still saturated with old ink.

Clean the Pads: If you reset the printer more than twice without cleaning or replacing the pads, ink will eventually leak out of the bottom of the printer.

External Waste Tank: Many 1390 users install an "External Waste Ink Bottle" kit. This bypasses the internal sponges and collects the waste ink in an external jar, making the software reset much safer to perform repeatedly. Conclusion

The Epson 1390 Adjustment Program is a lifesaver for photographers and office workers who rely on this A3 workhorse. By resetting the Waste Ink Pad Counter, you save hundreds of dollars in professional repair fees and avoid the landfill. Just remember to keep an eye on your physical ink sponges to keep your workspace clean.

Adjustment Program Epson 1390 Resetter is a specialized utility tool used to maintain and reset specific internal counters within the Epson Stylus Photo 1390 printer. Primary Functions Waste Ink Pad Counter Reset

: The most common use is to reset the "Service Required" error that occurs when the printer's internal waste ink pads are calculated to be full. Print Head Alignment

: Calibrates the print head to ensure precise ink droplet placement. Cleaning Cycles

: Initiates deep cleaning procedures for the print head nozzles. EEPROM Data Copy

: Allows for backing up or restoring the printer's firmware settings. How to Use the Utility Connection

: Connect your Epson 1390 to your computer via a USB cable (wireless connections often fail during adjustment). Select Model : Open the AdjProg.exe file, click , and choose the Stylus Photo 1390 from the model list. Particular Adjustment Mode

: Click this button to see the list of available maintenance tasks. Resetting the Counter Waste ink pad counter under the Maintenance section. Check the boxes for the Main pad counter Initialization to reset the values to zero.

: Turn the printer off and back on when prompted to finalize the reset. Important Considerations Physical Maintenance

: Resetting the software counter does not physically clean the ink pads. To prevent leaks, you should eventually replace the pads or install an external waste ink tank. Compatibility

: This specific program is designed only for the Epson 1390 model. Using it on other models can cause firmware errors.

: Since these tools are often distributed by third parties, ensure you download them from reputable sources and scan for malware before execution. step-by-step guide ✅ (Recommended) Physically clean or replace the waste

on how to physically clean the waste ink pads, or are you looking for a download link for a specific operating system?

The Epson Stylus Photo 1390 Adjustment Program is a specialized service utility used to perform maintenance and internal adjustments on the Epson 1390 printer. It is most commonly used as a "resetter" to clear the Waste Ink Pad Counter, which triggers a "Service Required" error (flashing red lights) once it reaches its limit. Key Features and Functions

Beyond resetting ink counters, the program allows for various technical calibrations:

Maintenance: Resetting the waste ink pad counter and performing deep print head cleanings.

Adjustments: Bi-directional (Bi-D) adjustment, top margin adjustment, and head ID settings.

Diagnostics: Checking printer status, reading error codes, and backing up/restoring mainboard EEPROM data. How to Use the Epson 1390 Resetter

To reset your printer's waste ink counter, follow these general steps:

Preparation: Disable your antivirus software temporarily, as these third-party utilities are often flagged as false positives.

Date Adjustment: Some versions of the resetter require your computer's system date to be set to October 4, 2007, to bypass "date bomb" restrictions.

Run the Utility: Extract the downloaded file and run AdjProg.exe as an administrator.

Select Printer: Click Select, choose your printer model (SP 1390), and ensure the correct USB port is selected. Enter Maintenance Mode: Click Particular Adjustment Mode. Select Waste ink pad counter from the list and click OK. Initialization:

Check the boxes for Main pad counter and Platen pad counter.

Click Check to see the current levels, then click Initialization to reset them to zero.

Finalize: Turn off the printer when prompted, wait 10 seconds, and turn it back on.

For a step-by-step visual guide on the reset process, including the specific date adjustment required for some versions: How to Reset Epson SP 1390 Printer YouTube• Apr 14, 2020 Important Considerations How to Reset Epson SP 1390 Printer