Amsamotion Usb-cn226 Driver Download ~upd~ Page

To set up the Amsamotion USB-CN226

programming cable, you must install the proper driver to simulate a COM port for communication with Omron PLCs. Official Driver Downloads

The following resources provide drivers for the USB-CN226 cable, which typically uses an FTDI chipset.

Amsamotion Direct Link: Download the latest PLC programmable cable drivers from the Amsamotion Official Store.

FTDI Generic Drivers: Since this cable uses a standard FTDI chip, you can also download the "Virtual COM Port" (VCP) drivers directly from the FTDI Chip Website for Windows 10/11. Cable Compatibility & Specs

This cable is specifically designed for the following Omron PLC series: CS Series: CS1G, CS1H, CS1W

CJ Series: CJ1G, CJ1H, CJ1M (Note: Not for CJ2M, which requires a square-port cable). Other Models: CQM1H, CPM2C Installation Guide

For the Amsamotion USB-CN226 cable, which is primarily used to connect Omron PLCs (CS, CJ, CQM1H, and CPM2C series) to a computer via USB, the driver you need depends on the specific internal chip used in your cable version. 1. Identify the Correct Driver

Most Amsamotion cables use one of two main chipsets. You can check which one you have by looking at the cable's physical label or checking Device Manager on your PC after plugging it in.

FTDI Chip (High-End Version): This is the most common for the "Plus" (+) versions of the cable. It is highly stable and often works automatically with Windows Update. Download: FTDI Official VCP Drivers

CH340/CH341 Chip (Economic Version): Common in the standard or "economic" versions of the Amsamotion cable. Download: XUEPLC Amsamotion Driver Page 2. Installation Steps Plug in the cable: Connect the USB end to your computer.

Open Device Manager: Right-click the Start button and select Device Manager. amsamotion usb-cn226 driver download

Find the device: Look under "Ports (COM & LPT)" or "Other Devices." It may appear as "USB Serial Port" or "Unknown Device". Install/Update Driver: Right-click the device -> Update driver.

Choose "Browse my computer for drivers" and select the folder where you downloaded and extracted the driver files.

Note the COM Port: Once installed, the device will be assigned a port number (e.g., COM3). You will need this number for your PLC software settings. 3. Configuring Your PLC Software (CX-Programmer) To use the cable with Omron's CX-Programmer: Go to Project > Change PLC.

In the "Network Type" dropdown, select SYSWAY or Toolbus (depending on your PLC model). Click Settings and go to the Driver tab.

Select the COM Port number that matches what you saw in Device Manager. Quick Troubleshooting amsamotion driver - PLC ONE

AMSAMOTION USB-CN226 is a programming cable designed specifically for connecting a PC to Omron CS, CJ, CQM1H, and CPM2C Series PLCs Ubuy Jamaica

The driver for this cable allows the computer's USB port to simulate a traditional serial (COM) interface, enabling standard PLC programming software like CX-Programmer to communicate with the hardware. Download and Installation Driver Type : The cable typically uses an CH340 chip , depending on the specific model version. Windows 10/11 Support

: For modern operating systems, Windows often recognizes the cable automatically. If it does not, you must manually install the FTDI or CH340 driver. Download Sources Official drivers can be found on the AMSAMOTION Store Facebook Page which links to their direct storage. Alternative mirrors are available at Setup Guide amsamotion usb-cn226 driver download - Facebook

The AMSAMOTION USB-CN226 is a specialized USB-to-serial programming cable used to connect a PC to Omron PLCs (Programmable Logic Controllers), specifically the CS, CJ, CQM1H, and CPM2C series. Because it is a third-party (OEM) alternative to original Omron cables, it requires specific drivers to simulate a standard COM port on your computer. Driver Availability & Sources

Drivers for the USB-CN226 are typically bundled with the cable on a CD-ROM or are available through industrial automation community sites.

Chipset Drivers: Most AMSAMOTION cables utilize common serial-to-USB bridge chips. Depending on the specific version of your cable, you may need: To set up the Amsamotion USB-CN226 Go to

FTDI VCP Drivers: High-quality versions of this cable often use FTDI chips. You can find official drivers on the FTDI Chip VCP Drivers Page.

CH340 Drivers: Lower-cost variants frequently use the CH340 chip. Drivers for this can be found on sites like PLC ONE.

Third-Party Repositories: Several industrial tech blogs host direct download links:

XUEPLC provides a dedicated landing page for Windows 10/11 64-bit drivers.

PLC ONE offers a step-by-step installation tutorial and executable driver packages. Specifications & System Compatibility amsamotion usb-cn226 driver download - Facebook

The AMSAMOTION USB-CN226 Go to product viewer dialog for this item.

is a critical communication bridge for industrial automation, specifically designed to connect personal computers to Omron Programmable Logic Controllers (PLCs). By converting USB signals into the RS232 protocol, it allows modern hardware to interface with legacy industrial systems like the Omron CS, CJ, CQM1H, and CPM2C series. The Role of the Driver

The driver is the software foundation that enables this hardware connection. It instructs the computer’s operating system to simulate a traditional serial (COM) port via the USB interface. Without the correct driver—typically based on the FT232 chipset—programming software like Omron's CX-Programmer cannot recognize the PLC, leading to communication timeouts or failed data transfers. Key Technical Features

Broad Compatibility: Supports Windows XP, 7, 10, and 11 (32/64-bit).

High Performance: Features an FTDI chipset for stable, high-speed data communication (up to 115,200 baud).

Isolation Protection: High-speed isolated versions protect both the PC and PLC from electrical noise and voltage spikes common in factory environments. Q4: Is the USB-CN226 the same as the PL2303TA

Visual Indicators: Includes a two-color LED on the converter box to show real-time data transceiving status. Installation Workflow

Download: Obtain the official driver from a reliable source like the AMSAMOTION website.

Recognition: Plug the cable into a USB port. If it appears as an "Unknown Device" or "FT232R USB UART" in the Windows Device Manager, a manual update is required.

Update: Right-click the device, select "Update Driver," and browse to the extracted driver folder.

Verification: Once installed, it should appear under Ports (COM & LPT) as a "USB Serial Port (COMx)".

Software Setup: In CX-Programmer, select the matching COM port and set communication parameters to match the PLC's default settings. Why Quality Matters

In industrial settings, downtime is expensive. While generic adapters may exist, the AMSAMOTION USB-CN226 is engineered for the specific timing and voltage requirements of Omron hardware. Investing in a high-quality, properly driven cable ensures signal integrity, reducing the risk of corrupted program uploads and unplanned production halts.

Here’s a detailed, step-by-step guide to downloading and installing the driver for the Amsamotion USB-CN226 (commonly a USB to Gigabit Ethernet adapter, often based on chipsets like Realtek RTL8153, AX88179, or similar).

Q4: Is the USB-CN226 the same as the PL2303TA?

Electrically similar, but the CN226 is a complete adapter, while PL2303TA is just the chip.

macOS (Intel & Apple Silicon)

15. Legal and safety notes

3. Step-by-Step Driver Installation

Error 2: Code 28 – “Drivers not installed”

Cause: No driver found.

Solution: Run Windows Update. If that fails, manually install using the CH341SER.EXE even if you think it’s Prolific—many Amsamotion units are rebranded CH340s.