By Fantomel New: Autocom 202023 Vm En

Autocom 2020.23 Virtual Machine (VM) is a popular pre-configured solution for automotive diagnostics, specifically designed to run on VMware without the complexities of a native installation. This English version provides a stable environment for both CARS and TRUCKS diagnostic software, often bundled with a pre-activated setup. Key Features of the 2020.23 Release Broad Vehicle Support

: Includes comprehensive databases for both passenger cars and heavy-duty trucks. Pre-Activated Environment

: The VM is typically distributed as a fully activated "plug-and-play" system, bypassing the standard activation file generation required for native installs. Virtual Isolation

: Running as a VM protects your host operating system from potential software conflicts or driver issues. Installation Guide for Fantomel's VM

To set up the Autocom 2020.23 VM, follow these standard steps: Prepare the Files : Download the provided archive (often a ) and extract it using a tool like Software Requirement : Ensure you have VMware Workstation Player (Version 16 or 17 recommended) installed on your PC. Open the VM Open VMware and select "Open a Virtual Machine" Navigate to your extracted folder and select the 2020.23.vmx Hardware & BIOS Settings Virtualization : You must enable Intel VT-x

in your computer’s BIOS settings to run any virtual machine. : Ensure your PC has at least 4 GB of RAM

(8 GB recommended) to allocate enough resources to the guest OS. First Launch : When prompted by VMware, select "I moved it"

to maintain the pre-configured hardware and license settings. autocom.se Technical Requirements Minimum Specification Intel Core i5 or better At least 16 GB of free hard drive space DS150E (Single or Double Board) or CDP+ diagnostic hardware Connectivity

USB port for the diagnostic interface and Bluetooth (optional) : For those preferring a native installation

(not a VM), you may need to manually generate activation files and send them to providers for a license key. firmware updates for the DS150E interface used with this VM? How to install AUTOCOM 2020.23 on VMware?

Download and installation tutorial. * Download the CDP 2020.23. rar archive, containing the partition with the MULTIDIAG PRO 2020. AUTODIAG-France How to install AUTOCOM 2020.23 on VMware?

Download and installation tutorial. * Download the CDP 2020.23. rar archive, containing the partition with the MULTIDIAG PRO 2020. AUTODIAG-France Installation - autocom.se

To set up the Autocom 2020.23 VM (Virtual Machine) by Fantomel, you will primarily use VMware Workstation to run the pre-configured environment. This version is designed for multi-brand vehicle diagnostics and is often used with interfaces like the DS150E. 1. Preparation and Installation

Virtualization Settings: Before starting, ensure that Virtualization Technology (VT-x or AMD-V) is enabled in your computer's BIOS/UEFI.

Extract Files: Use a tool like WinRAR to unzip the downloaded archive. You should see a folder containing a .vmx file. autocom 202023 vm en by fantomel new

Install Hypervisor: Download and install VMware Workstation (Version 16 or 17 is typically recommended for this release). 2. Launching the Virtual Machine

Open VM: Launch VMware and click "Open a Virtual Machine". Navigate to the extracted folder and select the 2020.23.vmx file.

The "I Moved It" Step: When you first click "Play virtual machine", a prompt will appear. Always select "I Moved It". This preserves the pre-activated hardware ID within the VM, preventing activation errors.

Access the Software: Once the VM boots to its desktop, you will find shortcuts for Autocom Cars and Autocom Trucks. 3. Hardware Configuration

USB Connection: Plug your diagnostic probe (like the DS150E) into your physical computer's USB port.

Redirect to VM: In the VMware top menu, go to VM > Removable Devices > [Your Device Name] > Connect (Disconnect from Host).

Firmware Update: Within the Autocom software settings, check the hardware connection. If the software prompts you, perform a Firmware Update on your probe to ensure compatibility with version 2020.23. 4. Troubleshooting Common Issues

Antivirus Interference: If files disappear after extraction, temporarily disable your antivirus or add the VM folder to its exclusion list.

VMware Tools: If the screen resolution is incorrect or file sharing isn't working, ensure VMware Tools are installed or updated within the guest OS.

Are you using a single-board or double-board diagnostic interface with this setup? How to install AUTOCOM 2020.23 on VMware?

Download and installation tutorial. * Download the CDP 2020.23. rar archive, containing the partition with the MULTIDIAG PRO 2020. AUTODIAG-France How to install AUTOCOM 2020.23 on VMware?

The post for the Autocom 2020.23 Virtual Machine (VM) in English, created by

, provides a pre-configured diagnostic environment for cars and trucks. This release is often shared on automotive forums like MHH AUTO and OBD2Sales. Key Details and Requirements

Software Version: Autocom 2020.23, which supports vehicle diagnostics for models typically up to 2020/2021. Autocom 2020

Virtual Machine Setup: The package is provided as a VMware image (often a ~5.5GB .7z file), designed to run on VMware Workstation 16 or newer. System Configuration:

BIOS: Intel Virtualization Technology (VT-x) must be ENABLED in your computer's BIOS settings to run the VM.

OS Compatibility: While the software within the VM is pre-installed, it allows users on newer operating systems (like Windows 11) to run the older diagnostic software without local installation issues.

Firmware: The post typically includes recommended firmware (e.g., version 3201 or 3200) for Single PCB Delphi/Autocom interfaces. Installation Steps Download the VM image and VMware Workstation. Extract the 7z file using a tool like 7-Zip. Open the .vmx file within VMware Workstation.

Configure your USB settings to ensure your diagnostic interface (VCI) is correctly connected to the virtual environment.

Note: For newer vehicle support or if you encounter issues on Windows 10/11, some users recommend looking into the Autocom 2021.11 update, which fantomel also actively supports on forums.

Autocom 2020.23 VM EN by Fantomel is a popular pre-configured virtual machine (VM) designed to simplify the installation of multi-brand diagnostic software for Delphi and Autocom devices. Unlike native installations that often require complex manual activation and driver troubleshooting, this VM provides a ready-to-use environment on a virtual desktop. Quick Setup Guide

To get started with the Fantomel VM, follow these standard steps:

Prepare Software: Download and unzip the archive (often named 2020.23 VM EN.zip) using a tool like WinRAR.

Open VM: Launch VMware Workstation 12 or newer (v17 is recommended for modern systems).

Load Machine: Click "Open a Virtual Machine" and select the 2020.23.vmx file located in your unzipped folder.

Critical Prompt: When you start the VM, select "I Moved It" if prompted. This prevents the VM from generating a new hardware ID, which would break the pre-existing software activation.

Connect Hardware: Plug in your diagnostic probe (e.g., DS150E) and ensure the USB port is redirected to the virtual machine rather than your host PC. Key Features

Expanded Database: Supports cars and trucks manufactured up to 2020. Hidden Technical Notes (What the Forums Don’t Say)

Updated Interface: Features a completely new UI compared to older 2013-based versions.

English Windows Environment: The "EN" designation indicates the VM runs on an English version of Windows, which is generally more stable for worldwide users.

No Installation Conflict: Since it runs in a VM, it won't interfere with other diagnostic software installed on your main computer. Bluetooth Configuration

If you are using a Bluetooth-enabled adapter, follow these steps to connect it within the VM: Enable Bluetooth on your host OS.

In VMware settings, go to the USB Controller section and check "Share Bluetooth devices with the virtual machine".

Inside the VM, go to Settings > Hardware Setup > VCI Connection and search for the adapter. Use PIN 0000 or 1234 when prompted by the host OS.

Note on "Native" Versions: While the VM is easier to set up, native (non-VM) versions exist that run faster but often require manual date changes (e.g., setting the PC date to 15.12.2021) to bypass activation errors.

Are you having trouble with a specific connection error or a "valid license key" prompt?

Configuration & usage tips

• Use bridged networking for license/activation servers that require LAN visibility.
• Disable host sleep/hibernate to avoid VM pausing during long diagnostics.
• Create a snapshot after first successful boot and driver configuration to preserve a clean baseline.
• If using serial-to-USB adapters, ensure driver inside VM matches the adapter vendor (FTDI/Prolific).
• For CAN/FD interfaces, confirm the VM’s virtual COM port mapping matches the Autocom configuration.
• Set Windows update to manual to avoid unintended updates that may break drivers.

Hidden Technical Notes (What the Forums Don’t Say)

• VMware Workstation Pro 17+ recommended. VirtualBox works but USB latency can break mid-flash.
• RAM allocation: Give it at least 8 GB. DK 2023.20 caches more graphical data for wiring diagrams.
• Hardware timebombs: Some clone adapters misreport serial numbers. The FantomEL VM uses a filter driver to override this — check the C:\ProgramData\FantomEL\ notes file inside the VM.
• Network mode: Set to NAT or Host-only. Bridged can trigger “license conflict” if another DK instance is on the same LAN.

Installation steps (generalized)

1. Verify host meets system requirements and enable virtualization in BIOS.
2. Install a compatible hypervisor (VMware Workstation Player or VirtualBox recommended).
3. Import the VM image:
   • VMware: File → Open or Import .ova/.ovf
   • VirtualBox: File → Import Appliance (.ova)
4. Configure VM settings:
   • CPUs: 2–4
   • RAM: 8–12 GB
   • Network: NAT or Bridged (use bridged if you need LAN access to other devices)
   • USB: Enable USB controller (USB 2.0/3.0 depending on dongle requirements)
5. Start VM. Log in with provided credentials (check README).
6. Attach USB OBD interface to host, then attach/passthrough to VM (VM → Removable Devices → [device] → Connect).
7. Install or confirm correct USB-to-serial/driver present inside VM if not preinstalled.
8. Launch Autocom diagnostic application and verify connection to vehicle ECU.

Step 2: Install VMware Workstation (or VirtualBox)

• Preferred: VMware Workstation Pro 15/16/17 (trial or free Player). The Fantomel build is typically optimized for VMware.
• Alternative: Oracle VirtualBox 7.0+ (require manual conversion of the .vmdk file).

Why Choose the Fantomel New VM Over Standard Autocom?

Standard Autocom software usually requires a specific hardware interface (like the Bosch ADS or VCI interface) and a subscription. The Fantomel New variant bypasses this via clever emulation.

Troubleshooting Common Issues

Even with a perfect VM, issues occur. Here are fixes for the most common problems with Autocom 202023 VM EN:

Issue 1: "Interface not found"

• Fix: In the VM, go to Device Manager. If the J2534 device has a yellow exclamation, right-click > Update Driver. Point to C:\Program Files (x86)\Autocom\Drivers.

Issue 2: VM runs very slowly

• Fix: Allocate more RAM (at least 4GB) and CPU cores (2 cores minimum). Also, ensure Hardware Virtualization (VT-x/AMD-V) is enabled in your BIOS.

Issue 3: The software asks for an activation key

• Fix: You have the wrong crack. The Fantomel "New" version includes a pre-run registry patcher. Check the desktop for a file named "Activator.exe" or "Fantomel Loader.exe". Run it as Administrator and click "Patch".

2. Advanced Functions Unlocked

Unlike basic code readers, this software offers:

• Guided Diagnostics (step-by-step OEM repair instructions).
• ECU Coding & Programming (within the limits of the clone hardware).
• DPF Regeneration (forced regen for trucks and cars).
• Injector Coding (common rail diesel systems).
• SAS Calibration (steering angle sensor).