Autodata 3.45 The — Hardware Information Does Not Match With
Autodata 3.45 Error: “The Hardware Information Does Not Match With” – Causes, Fixes, and Prevention
Autodata has long been the gold standard for automotive technicians, workshop owners, and DIY mechanics. Its detailed technical specifications, wiring diagrams, diagnostic trouble codes (DTCs), and repair procedures are indispensable. However, like any sophisticated piece of software, it is prone to errors. One of the most notorious and frustrating messages encountered by users of version 3.45 is:
“The hardware information does not match with…”
This cryptic error typically appears immediately after installation or when attempting to launch the application. It stops the software dead in its tracks, preventing access to critical repair data. If you are staring at this message right now, don’t panic. This article will dissect the error in detail, explain why it happens, and provide a step-by-step guide to resolve it.
Part 2: Common Scenarios That Trigger the Error
The error does not appear out of nowhere. It is almost always triggered by a specific change or configuration issue. Below are the most common scenarios:
Step 1: Verify It’s Not a Simple Glitch
Before diving into complex fixes, try these basic checks:
- Restart your computer. Sometimes a temporary driver issue causes the HASP key to be unrecognized.
- Reinsert the USB dongle (if you have one). Try a different USB port, especially a port directly on the motherboard (not a hub).
- Disable antivirus temporarily. Some aggressive antivirus programs block the HASP drivers, causing the software to think hardware has changed.
4.2 Software & OS-Level Changes
- Virtualization: Running Autodata inside a VM (VMware, VirtualBox) changes MAC and motherboard serials.
- Disk Utility usage: Using
VOLcommand in Windows or third-party tools to change volume serial number. - Windows reinstallation: Even on same hardware, a fresh OS install may change drive serial presentation (rare but possible with IDE-to-AHCI switch).
4.3 Crack/Patch Incompatibility
Many unofficial versions of Autodata 3.45 use a patched Autodata.exe or a loader that bypasses HW check. However:
- Different crack groups use different HWID calculation routines.
- Mixing a patch from one source with a license file from another causes a mismatch.
- Windows updates (e.g., .NET Framework or C++ redistributable changes) can alter how the software queries hardware, breaking the patched check.
5.1. Use a Dedicated, Offline PC
The best solution is to dedicate an older laptop or desktop running Windows 7 or Windows XP strictly for Autodata 3.45. Do not connect this machine to the internet. Do not update Windows. Do not change any hardware.
2.4. Windows Registry Corruption or Driver Conflicts
In some cases, a legitimate installation can break because of:
- A Windows update that changes driver enumeration order.
- Registry cleaner tools that delete critical license keys.
- Conflicting HASP driver versions.
Summary
The error "Hardware Information Does Not Match" is a legacy software conflict, not a broken computer. By applying the registry fix and consistently running the application as an Administrator, Autodata 3.45 can run successfully on Windows 10 and 11.
The "Hardware Information Does Not Match" error in Autodata 3.45 indicates a mismatch between the license registry and the system's Hardware ID (UID), often stemming from emulator or driver issues. Resolving this involves generating a new UID, reinstalling the Sentinel emulator, adjusting regional settings to English (US), and reapplying the registry fix. For detailed instructions, see the Scribd Autodata Guide
Autodata 3.45 Installation Guide | PDF | 64 Bit Computing - Scribd
Troubleshooting "Hardware Information Does Not Match" in Autodata 3.45
Autodata 3.45 remains one of the most popular offline diagnostic resources for mechanics and automotive enthusiasts. However, because this version is often installed using older emulators or specific licensing patches, users frequently encounter the frustrating error: "The hardware information does not match with the licensed information."
This guide breaks down why this happens and the step-by-step methods to get your software back up and running. Why This Error Occurs
The "Hardware Information Does Not Match" error is a security trigger. It typically happens when:
Hardware Changes: You upgraded your RAM, replaced a hard drive, or changed your motherboard.
OS Updates: A Windows update altered how the software perceives your system ID.
Registry Corruption: The licensing "site code" stored in the Windows Registry no longer aligns with the "activation code" provided during installation.
Emulator Failure: The virtual dongle or Sentinel driver used to bypass the original hardware key has crashed or was quarantined by antivirus software. Step-by-Step Fixes 1. Disable Antivirus and Restore Files Autodata 3.45 The Hardware Information Does Not Match With
Modern antivirus programs (and Windows Defender) often flag Autodata’s licensing files as "False Positives." Go to Windows Security > Virus & threat protection.
Check your Protection History. If you see files like adBCD.dll or ndas.sys quarantined, restore them.
Pro Tip: Add the entire Autodata installation folder (usually C:\ADCD2) to your antivirus Exclusion List. 2. Run the "GetID" Tool
Autodata 3.45 usually comes with a utility to generate a unique Hardware ID. Navigate to your installation folder.
Right-click the GetID.exe (or similarly named keygen/ID tool) and select Run as Administrator.
If the ID displayed does not match the one used during your initial activation, you will need to re-generate a new license file or registry entry using your specific "Site Code." 3. Re-register the Sentinel Drivers
Autodata relies on virtual drivers to simulate a hardware dongle. If these fail, the hardware check fails. Open Command Prompt (Admin). Navigate to your Autodata directory.
Run the driver setup scripts (often named install.bat or register.bat). Restart your PC and try launching the program again. 4. Adjust System Date (The "Time Bomb" Fix)
Some versions of Autodata 3.45 are hard-coded to expire after a certain date.
Try temporarily setting your Windows System Date back to 2014 or 2015.
If the program opens without the hardware error, you are dealing with a "time-bombed" version. You can use a utility like "RunAsDate" to automate this so your entire system clock doesn't have to be wrong. 5. Clear the Registry Entries If you are attempting a clean reinstall: Press Win + R, type regedit, and hit Enter.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Autodata (on 64-bit systems).
Delete the old license keys and re-run the activation sequence. How to Prevent This in the Future
Use a Virtual Machine (VM): Install Autodata 3.45 inside a VM (like VMware or VirtualBox) running Windows 7. Since the "hardware" in a VM never changes, you can move the VM to a new computer without ever triggering the hardware mismatch error.
Backup your License: Once you get the "Hardware Match," export the registry key associated with Autodata and save it to a USB drive.
Are you seeing a specific error code or a "Site Code" number on your screen right now that I can help you decode?
The error message "The hardware information does not match with your dongle" in Autodata 3.45
typically indicates a mismatch between the current PC's hardware ID (UID) and the one registered in your software license file Autodata 3
. This often occurs after hardware changes, OS updates, or if the license was generated for a different machine. Core Solution: Regenerate the License
Since the software is locked to a specific hardware ID, you must update your license file to match your current machine. Obtain New Hardware ID (UID): Navigate to the folder in your Autodata installation directory. Right-click GetUid-x86 (32-bit) or GetUid-x64 (64-bit) and select Run as Administrator
Copy the 8-digit (32-bit) or 10-digit (64-bit) code that appears in the box. Generate License Registry File: Use the generated UID to create a new license file (often a
If you are using a 64-bit system, some keygens require entering only the last 8 digits of the UID, ignoring the first two (often "64"). Import the New License: Double-click the new file and click to merge it into your Windows Registry. Troubleshooting Mismatch Triggers
If the error persists after regenerating the license, check these system configurations: Regional Settings: Autodata often requires the system locale to be set to English (United States) to function correctly. Sentinel Driver Status: Device Manager
for "SafeNet Sentinel Hardware Key". If it has an exclamation mark, right-click and Update Driver or reinstall the Sentinel Protection Installer. Virtual Device Check: "AuDaS0 Virtual Device"
is present under "System Devices" in Device Manager. If missing, reinstall the emulator files ( Emulator_x64 Emulator_x86 Administrator Privileges: Always run the executable as an Administrator. Microsoft Support Quick Verification Checklist Antivirus:
Temporarily disable antivirus during installation, as it may block the emulator or license generator. User Account Control (UAC) before running installation scripts or keygens. Test Mode: Ensure your PC is in
(typically visible in the bottom right corner of the desktop). If not, the emulator driver will not load. Did you recently change any hardware update your Windows version on this PC? Autodata 3.45 Installation Guide | PDF | 64 Bit Computing
The error "The Hardware Information Does Not Match With..." in Autodata 3.45 typically occurs when the unique Hardware ID (UID) used to generate your license no longer matches the ID currently detected by the software. This is common after hardware changes, OS updates, or improper driver installation. Common Causes
Hardware Changes: Installing new RAM, a different hard drive, or changing network adapters can alter your PC's Hardware ID.
Emulator/Driver Failure: The Sentinel hardware key emulator or dongle drivers may be disabled or corrupted.
Incorrect UID Generation: Generating a UID on a 64-bit system without restarting properly often results in an incorrect "640000000" code. Steps to Resolve Verify Hardware ID (UID)
Navigate to the GetUid-x64 (or x32) folder in your installation directory.
Right-click the GetUid file and select Run as Administrator.
Crucial for 64-bit: You must run the file, restart your PC, and then run it again to get the correct 10-digit code. If it shows "640000000," it is incorrect. Regenerate the License
Use the newly captured 10-digit (64-bit) or 8-digit (32-bit) code to generate a new .reg or .bat license file using your keygen.
Double-click the new license file to import the updated hardware information into your Windows Registry. Check Sentinel Drivers and Emulator Ensure the Sentinel Protection Installer is installed. “The hardware information does not match with…”
Open Device Manager and check for "Sentinel USB Keys" or "Universal Serial Bus controllers" with exclamation marks.
Restart the emulator by running the "Start Emulator" or "AuDaSO" tool as an Administrator. Adjust System Settings
Regional Settings: Ensure your system locale is set to English (United States), as other formats can cause runtime and licensing errors.
Test Mode: Verify that Windows is in Test Mode (usually indicated by text in the bottom-right corner of the desktop). If not, re-enable it via the installation scripts.
For more detailed walkthroughs, you can refer to community-shared guides on Scribd or visual troubleshooting on YouTube.
Did you recently update your Windows version or change any hardware components before this error appeared? How Do I install My Dongle Drivers
The error "The Hardware Information Does Not Match With" in Autodata 3.45 typically occurs when the software's security emulator detects a change in your computer's hardware configuration or when the licensing files (UID) do not correspond with the current system state. Core Reasons for the Mismatch
Hardware Changes: Swapping a hard drive, changing the motherboard, or even altering BIOS settings can trigger this error as the software's unique ID (UID) is tied to specific hardware signatures.
Licensing Errors: Using a license file (RegSettings) that was generated for a different computer or a previous installation that was not fully cleared.
Emulator Failure: The "AuDaS0" Virtual Device or Sentinel driver is either not installed or disabled by antivirus software, preventing the software from "seeing" the expected hardware environment. Recommended Solutions Regenerate the License (UID):
Navigate to the installation folder and look for a tool named GetUID.exe or similar.
Run this as an Administrator to generate a new 8 or 10-digit code specific to your current hardware.
Use this new code to create a fresh license file (often a .reg file) to import into your registry. Verify Drivers in Device Manager:
Check for "SafeNet Sentinel Hardware Key" and "AuDaS0 Virtual Device".
If they have an exclamation mark or are missing, manually reinstall the Emulator (x86 or x64) from your installation package. Adjust Regional Settings:
In some versions, mismatched hardware errors are actually caused by system localization. Set your Regional Format to English (United States) in the Windows Control Panel to ensure compatibility. Run as Administrator:
Ensure that both the installation files and the main ADBCD.exe (or equivalent) are set to "Run as Administrator" in their compatibility settings.
For further guidance, detailed community-provided steps can be found in the Autodata 3.45 Installation Guide on Scribd.
Autodata 3.45 Installation Guide | PDF | 64 Bit Computing - Scribd
2.1. You Replaced a Critical Hardware Component
Autodata 3.45 is sensitive to changes in:
- The primary hard drive (especially if you clone or replace it).
- The motherboard (even a BIOS update can sometimes change the hardware ID).
- The network card (adding or removing a WiFi or Ethernet adapter).
