The error message "The hardware information does not match with your dongle link" in Autodata 3.45 typically occurs when the software's unique identifier (UID) does not match the registry license key or when the virtual dongle emulator is not properly configured. Top Solutions to Fix the Error
Regenerate the License with the Correct UIDThe most common cause is using a license file generated for a different computer or an incorrect UID.
Open the Keygen or Crack folder and run GetUid-x86 or GetUid-x64 as Administrator.
Note the 8-digit (32-bit) or 10-digit (64-bit) number provided.
Crucial Step: When entering the UID into the key generator, do not include the first two digits (often "64"). For example, if your UID is 6485956AB, enter only 85956AB.
Generate a new .reg file, double-click it to import it into your registry, and restart.
Verify the Sentinel Emulator StatusIf the virtual dongle (emulator) isn't running, the hardware check will fail. Go to Device Manager.
Look under "System Devices" for AuDaS0 Virtual Device or "SafeNet Sentinel Hardware Key".
If there is a yellow exclamation mark or it is missing, run the Emulator_x64 or Emulator_x86 installer again as Administrator.
Adjust Regional SettingsAutodata 3.45 is highly sensitive to system location settings and may throw hardware errors if they don't match the expected format. Go to Control Panel > Region.
Change the "Format" and "Location" to English (United States).
Restart in Test ModeThe software requires Windows to run in "Test Mode" to allow the unsigned emulator drivers to function.
Ensure "Test Mode" is visible in the bottom-right corner of your desktop.
If it isn't there, you may need to disable Secure Boot in your BIOS/UEFI or run the dseo13b.exe tool (often included in the install package) to enable it. Quick Checklist
Run as Administrator: Ensure every setup file and keygen is executed with admin privileges.
Disable Antivirus: Temporarily disable real-time protection, as it often deletes the emulator files or blocks registry changes.
Restart Often: Windows 7, 8, and 10 require a full reboot after installing the emulator and importing registry keys. Autodata 3.45 Installation Guide | PDF - Scribd The error message " The hardware information does
This error typically occurs because Autodata 3.45 uses a Sentinel dongle emulator that is locked to a specific Hardware ID (UID). If you have recently changed your hardware (like a motherboard, hard drive, or even a network adapter), the software will no longer recognize your machine. Step-by-Step Fix for Hardware Mismatch
To resolve this, you must re-generate a license file that matches your current machine's hardware profile: Extract the Hardware ID (UID):
Navigate to your installation folder and locate a tool typically named GetUid-x64.exe or GetUid-x86.exe (depending on your OS). Right-click and select Run as Administrator.
A window will appear displaying a unique 8-digit or 10-digit code. Copy or write this number down. Generate a New License:
Locate the Keygen or License Generator utility included in your download package. In the license generator, input the UID you just obtained.
Click the button to generate a new registry file (often named license_Autodata.reg or similar). Apply the New License: Close any open Autodata windows.
Double-click the newly generated .reg file to import it into your Windows Registry. Confirm the prompts to merge the data. Restart the Emulator:
Go to your start menu or installation folder and find the Sentinel Emulator (sometimes called AuDaC0 or AuDaS0).
Right-click it and Run as Administrator to start the service. Restart your computer if prompted. Common Troubleshooting Tips
Disable Antivirus: Security software often flags the emulator or keygen as a false positive. Temporarily disable it during this process.
UAC Settings: Ensure User Account Control (UAC) is disabled or set to "Never Notify" to allow registry changes.
Regional Settings: If you still get errors after fixing the ID, try changing your Windows Regional Settings to English (United States), as the software is sensitive to date/time formatting.
For further help, you can often find community solutions on technical forums like Carmasters.org or Mlab.org. Autodata 3.45_Free for All - Страница 10
Subject: Autodata 345 — hardware information mismatch (dongle)
Message: Hello — I receive the error “The hardware information does not match with your dongle link” when launching Autodata 3.45. Details:
Thanks, [Your name/contact]
If you want, I can:
This blog post provides a troubleshooting guide for the common "Hardware information does not match with your dongle" error in Autodata 3.45.
How to Fix the "Hardware Information Does Not Match With Your Dongle" Error in Autodata 3.45 If you are seeing the frustrating message
"The hardware information does not match with your dongle link"
while trying to launch Autodata 3.45, you aren't alone. This error typically occurs because the software's emulator cannot verify the unique hardware ID (UID) of your computer against the license file provided during installation.
Here is a step-by-step guide to resolving this mismatch and getting your diagnostic software back up and running. 1. Verify Your UID (Hardware ID)
The most common cause of this error is a mismatch between your PC's actual hardware ID and the registry file you installed. Run the Keygen as Admin : Go to your installation folder, open the folder, and run GetUid-x86 (for 32-bit) or GetUid-x64 (for 64-bit) as an Administrator Check the Code
: You will see an 8 or 10-digit code. If the code starts with "64", ignore the first two digits and only use the last 8 digits for your license generation. Invalid UID : If your UID shows as 6400000000 , it is invalid. You must restart your PC and try again. 2. Re-Generate and Import the Registry File
Once you have the correct UID, you need to ensure the registry knows about it.
Run the license generator tool and enter your correct UID to create a new Double-click this new registry file to it into your system. : If the automatic import fails, go to the RegSettings
folder and manually run the file that matches your OS version (x86 or x64). 3. Restart the Sentinel Emulator
The "dongle" in Autodata 3.45 is usually a virtual emulator (Sentinel). If it isn't running correctly, it can't "link" to your hardware. Open your Start menu and look for the folder named Find the icon that looks like a green traffic light and run it as an Administrator to start the emulator.
Wait 2–4 minutes for Windows to recognize the "new hardware". 4. Adjust Regional Settings
Autodata is notoriously picky about Windows regional settings. If your region is set to anything other than English (United States) , the dongle verification may fail. Control Panel > Region Change the "Format" to English (United States) Restart your computer for the changes to take effect. 5. Check Driver Status Ensure the virtual driver is actually installed and active. Device Manager Look under System Devices for "AuDaS0 Virtual Device" or "Sentinel USB Key".
If you see a yellow exclamation mark, right-click it and select "Update Driver," then manually point it to the drivers in your installation folder. Still having trouble? Ensure you have disabled your Antivirus
during these steps, as it often blocks the emulator from "signing" the necessary system files. Device Manager Update Autodata – Newer versions may have fixed
show the "Sentinel" device under System Devices, or is that section missing entirely?
Autodata 3.45 Installation Guide | PDF | 64 Bit Computing - Scribd
This error typically occurs when the hardware identifier (UID) generated by your PC does not match the license file or registry key being used by the Autodata 3.45 emulator
. Because the software is tied to a specific hardware configuration, any discrepancy between the "Hardware ID" and the "Dongle" (emulator) data will block access. Core Cause of the Mismatch The Autodata 3.45 emulator requires a unique 8-digit or 10-digit UID
that reflects your specific computer's hardware profile. If you are using a pre-generated license or one from another machine, the "Hardware information does not match" error will trigger. Step-by-Step Resolution
To fix this, you must re-generate a license file that specifically matches your current hardware: Extract the Correct UID
Run the "GetUID" or "Hardware ID" utility (usually found in the installation folder or "AuDaSO" subfolder) as an Administrator
This will display a code (8 digits for 32-bit systems, 10 digits for 64-bit). Copy this code exactly. Generate a New License
Use the key generator (keygen) provided with your software package. Input your unique UID into the keygen to create a custom (registry) or (license) file. Clean and Update Drivers
Uninstall any existing "Sentinel Protection Installer" or "Sentinel Runtime" from Control Panel > Programs and Features Download and install the latest Sentinel Protection Installer (version 7.6.0 or higher is often recommended).
Restart your PC. This is a critical step for Windows 7, 8, and 10 users. Import the New Registry File
Double-click the new registry file you generated in Step 2 to import it into your system. (often a green traffic light icon) as an Administrator. Itasca International Critical Troubleshooting Tips Run as Administrator
: Almost every execution step—especially the UID generator and the emulator—must be run with Administrator privileges Regional Settings : If the error persists, ensure your Windows Regional Settings are set to English (United States)
: Ensure Windows is in "Test Mode." A "Test Mode" watermark should appear in the bottom-right corner of your desktop.
: Disable your antivirus software for 10–15 minutes during the UID extraction and registry import to prevent it from blocking the emulator components. or locate the UID generator in your installation folder?
This error message — "Autodata 345: The hardware information does not match with your dongle link" — typically appears when using Autodata (a popular automotive diagnostic and repair information software) with a USB dongle (hardware key) for licensing. The error indicates that the software has detected a mismatch between the expected hardware ID stored in the license file and the actual hardware ID of the dongle or computer. open the folder
Below is a detailed guide to understanding, diagnosing, and resolving this issue.
Corrupted drivers are a common cause.