Bonavita Sheffield Lifestyle Crib Instructions

Bonavita Sheffield Lifestyle Crib Instructions: A Comprehensive Guide

Congratulations on purchasing the Bonavita Sheffield Lifestyle Crib, a beautiful and functional addition to your nursery. To ensure safe and proper use, please read these instructions carefully before assembling and using the crib.

Before Assembly

Check the package contents: Verify that all the parts and hardware are included in the package. The Bonavita Sheffield Lifestyle Crib comes with:
- Crib frame
- Mattress support
- Mattress (not included)
- Crib slats
- Side rails
- Headboard and footboard
- Hardware pack (screws, bolts, and Allen wrench)
Read the safety guidelines: Familiarize yourself with the safety guidelines and warnings provided below.

Safety Guidelines and Warnings

Age range: The Bonavita Sheffield Lifestyle Crib is designed for children from birth to 35 inches (89 cm) tall, or until they can climb out.
Weight capacity: The crib is designed to support a maximum weight of 40 pounds (18 kg).
Mattress requirements: Use a firm, snug-fitting mattress that meets the following requirements:
- Thickness: 4-6 inches (10-15 cm)
- Size: 28 inches x 52 inches (71 cm x 132 cm)
Bedding and toys: Keep the crib free of soft bedding, pillows, and toys to reduce the risk of suffocation and strangulation.

Assembly Instructions

Step 1: Assemble the crib frame
- Attach the side rails to the headboard and footboard using the provided screws.
- Make sure the side rails are securely attached and the frame is level.
Step 2: Attach the crib slats
- Place the crib slats onto the crib frame, ensuring they are evenly spaced and securely attached.
Step 3: Attach the mattress support
- Attach the mattress support to the crib frame using the provided screws.
- Make sure the mattress support is level and securely attached.
Step 4: Assemble the headboard and footboard
- Attach the headboard and footboard to the crib frame using the provided screws.

Additional Tips and Reminders

Tighten all screws and bolts: Regularly check and tighten all screws and bolts to ensure the crib remains stable and secure.
Use a firm, snug-fitting mattress: A soft or oversized mattress can increase the risk of suffocation and strangulation.
Keep the crib clean and dry: Regularly clean and dry the crib to prevent the growth of mold and mildew.

Warranty and Support

The Bonavita Sheffield Lifestyle Crib is backed by a limited warranty. For more information, please refer to the warranty documentation provided with your purchase. If you have any questions or concerns, please contact Bonavita's customer support team.

Conclusion

By following these instructions and safety guidelines, you can ensure a safe and enjoyable experience for your child in the Bonavita Sheffield Lifestyle Crib. Happy parenting!

Before you begin, unbox all components and verify you have the following: Essential Tool: One Allen Key (usually included). Key Hardware: (8) 1/4” x 3” Bolts (Part 1) (8) 1/4” x 2-1/2” Bolts (Part 2) (8) 1/4” x 3/4” Bolts (Part 3) (16) Barrel Nuts (Part T) (4) Wooden Dowels (Part X) 2. Main Frame Assembly

Back Rail Connection: Attach the Left Panel (A) and Right Panel (B) to the Back Rail (C) using the 2-1/2” bolts and barrel nuts.

Corner Posts: Insert wooden dowels into the top of the front and back posts. Secure the panels using 3” bolts and barrel nuts.

Tightening: Tighten all bolts with the Allen Key, but do not overtighten, as this can damage the wood. 3. Mattress Base Installation

Height Selection: Choose a height level based on your child's age. Use the highest position for a newborn to make it easier to reach them; lower it as the baby grows to prevent them from climbing out.

Attachment: Secure the mattress base using the 3/4” bolts. Ensure the spring frame is installed flat side up. 4. Finalizing the Crib

Front Rail: Position the Front Rail (D) between the side panels and secure it with the remaining 2-1/2” bolts and barrel nuts. bonavita sheffield lifestyle crib instructions

Safety Check: Verify that all screws are securely fastened and that the spacing between slats is no wider than 2-3/8 inches (6 cm). 5. Conversion Options

The "Lifestyle" or "Stages" model is designed to grow with your child:

How To Convert Crib To Toddler Bed: A Step-By-Step Guide - Newton Baby

Note: Bonavita is a brand under Million Dollar Baby (MDB Family). If you need the official PDF, contact MDB Family directly, but this draft matches their typical manual structure.

A. Toddler Bed Conversion (Recommended for 15+ months)

Remove the mattress and support board.
Remove the front side panel (the one that drops or is removable – on the Sheffield, it’s the right side panel).
Install the Bonavita toddler guard rail (Model #B1080) using the pre-drilled holes on the front of the crib.
Reinstall the mattress support board at the lowest setting.

Assembly Instructions (Step by Step)

Step 1 – Prepare the Area
Clear a soft, flat surface (like a carpet or blanket) to avoid scratching the wood.

Step 2 – Attach the Fixed Side to Head/Foot Boards
Lay the headboard face down. Using the provided bolts and barrel nuts, attach one end of the fixed side panel to the headboard. Repeat for the footboard. Tighten firmly but do not over-tighten.

Step 3 – Install the Mattress Support
Choose the mattress height: Check the package contents : Verify that all

Highest setting (newborn to ~5 months)
Middle setting (when baby starts pulling up)
Lowest setting (for older toddlers)

Insert the support brackets into the pre-drilled holes at your chosen height. Lower the metal or wood mattress support onto the brackets.

Step 4 – Attach the Second Fixed Side
Secure the remaining side panel to both the headboard and footboard. Ensure all bolts are snug.

Step 5 – Add the Slats
Place wooden slats across the mattress support (if not pre-attached). Slats should fit snugly with no gaps > 2 3/8 inches (6 cm).

Step 6 – Final Tightening
After all parts are connected, go back and fully tighten all bolts with the Allen key. Check for wobble.

Step 4: Level the Crib

Place the partially assembled crib on its feet. Using a carpenter’s level (or a phone app), check that the top rails are perfectly horizontal. Bonavita includes adjustable leveling feet on the bottom of each leg. Twist these feet until the crib no longer wobbles.

Part 2: Step-by-Step Bonavita Sheffield Crib Assembly Instructions

Estimated assembly time: 45–60 minutes. Recommended: Two adults.

Bonavita Sheffield Lifestyle Crib – Assembly & Instruction Manual (Draft)

Model: Sheffield Lifestyle Crib
Style: 4-in-1 Convertible Crib (Crib, Toddler Bed, Daybed, Full-Size Bed)
Safety Certification: JPMA Certified, ASTM F1169, CPSC compliance

⚠️ Important Safety Warnings (Read First)

Stop using crib if any parts are broken, missing, or cracked. Contact Bonavita customer service for replacement parts.
Never use a waterbed mattress in this crib.
Mattress thickness: Use a full-size crib mattress no thicker than 6 inches (15 cm) and no more than 1 inch (2.5 cm) gap between mattress and crib sides.
Infant hazard: To prevent falls, adjust mattress height to lowest setting once child can sit or pull up.
Toddler bed conversion: Use only when child is at least 15 months old and cannot climb out.
Hardware: Check tightness before each use. Re-tighten every 2–4 weeks.

To Daybed

Same as toddler bed, but without guardrail.

B. Daybed Mode (No guard rail)

Simply remove the front side panel (right side). Leave the mattress support in the lowest position. The daybed is only for supervised rest and play—never for overnight sleep unless a toddler rail is attached.