Canon Service Tool V4718 Verified < TRENDING – 2025 >
Canon Service Tool v4718 is a specialized maintenance software used primarily to reset the internal "waste ink counter" (often called the absorber or "pamper" counter) on various Canon PIXMA and MAXIFY printer series.
When a printer reaches its maximum waste ink capacity—typically indicated by error codes like
—it will stop functioning to prevent physical ink overflow. This tool allows users to clear these errors and extend the life of their device after cleaning or replacing the ink absorbers. Key Features of v4718 Waste Ink Reset
: Clears the internal counter to "0" to resolve lock-out errors. EEPROM Management
: Allows users to print and save EEPROM data to diagnose technical issues. Nozzle Checks
: Initiates deep cleaning or nozzle test prints directly from the software. Region Setting
: Can be used to set or update the printer's destination region. Supported Models
While version-specific compatibility varies, v4718 is noted for its effectiveness with: : PIXMA G1000, G2000, G3000, G1400, G2400, G3400.
: MG3500 and MG3600 series (often where other versions like v5103 fail with "error 006"). : iP2700, iP4840, and others. How to Use Canon Service Tool v4718 To use this tool, the printer must first be placed into Service Mode Enter Service Mode
Turn off the printer but keep it connected to power and a PC via USB. Stop/Reset button, then press and hold the
While holding Power, release Stop/Reset, then press Stop/Reset (or 2-6 times depending on the specific model).
Release both buttons. If the power light stays solid green, you are in Service Mode. Run the Software Service Tool v4718.exe "Clear Ink Counter" section, select "Ink Absorber Counter" section, ensure the value is set to
: Turn the printer off and back on again to exit Service Mode and resume normal printing.
Canon Service Tool v4718 is a specialized Windows utility used by technicians to perform maintenance and hardware resets on Canon inkjet printers. It is most commonly used to clear the "Ink Absorber Full" (Error 5B00) message after the waste ink pads have been physically replaced. Key Features and Capabilities
The tool provides access to advanced printer functions that are typically hidden from end-users: canon service tool v4718 verified
Ink Absorber Reset: Resets the internal counter for waste ink pads.
EEPROM Operations: Allows users to view and print detailed EEPROM logs, which show printer history and error records.
Diagnostics: Runs nozzle checks, test prints, and print head cleanings.
Hardware Calibration: Adjusts sensor sensitivities and touch panel alignment.
Firmware Support: Facilitates firmware updates or resets after logic board replacements. Compatibility
Version 4718 is particularly effective for older and mid-range Canon models:
G-Series: Primarily designed for G1000, G2000, and G3000 series.
MG-Series: Verified to work with models like the MG3500 and MG3600.
Legacy Support: Supports older cartridge generations like PGI-x50/CLI-x51. How to Use (Service Mode)
The software will only recognize the printer if it is first placed in Service Mode. While the exact steps vary by model, the general procedure is: Turn off the printer but keep it connected to a PC via USB. Press and hold the Stop/Reset button. Press and hold the Power button while still holding Stop.
Release the Stop button, then press it 5 times (the light should alternate between green and orange). Release the Power button.
Open the Service Tool executable on your PC. If the printer is in Service Mode, the tool's options will become active. 💡 Important Security & Safety Notes
Service Tools for Canon Printers | Page 5 | PrinterKnowledge
Complete Guide to Canon Service Tool v4718 Verified The Canon Service Tool v4718 is a specialized, portable software utility used by technicians and DIY enthusiasts to perform advanced maintenance and repairs on Canon inkjet printers. Unlike the standard "Maintenance Tool" that comes with your printer driver, the Service Tool is designed to reprogram internal settings, most notably for resetting the waste ink absorber counter (commonly associated with error codes like 5B00 or 1700). Canon Service Tool v4718 is a specialized maintenance
This guide explores the features, compatible models, and safety considerations of the verified v4718 release. Key Features and Capabilities
The v4718 version is often cited as a more stable and "verified" release for specific newer printer generations. Its primary functions include:
Reset Ink Counter: Resets the waste ink absorber values to 0% after the physical felt pads have been cleaned or replaced.
EEPROM Operations: Allows users to print or save internal printer data (EEPROM) for diagnostic purposes or to verify settings before and after a reset.
Set Destination: Changes the printer’s regional firmware settings (e.g., USA, EUR, JPN, ASA) to match local cartridge requirements.
Advanced Cleaning: Triggers deep cleaning, nozzle checks, and print head alignment directly from the service interface.
Error Resolution: Effectively clears "Service Call Errors" that cannot be resolved through standard user menus. Compatible Printer Models
While various versions of the Service Tool exist, v4718 is particularly recommended for the following series: G Series: G1000, G2000, G3000
MG Series: MG3500, MG3600 (specifically MG3640), MG5500, MG5600, MG5700, MG6400, MG6600, MG6800 IP Series: IP2800
Note: Newer models or regional variations may require later versions like v5103 or v5306 if v4718 does not recognize the device. Step-by-Step Usage Guide
To use the tool successfully, your printer must be in "Service Mode" before the software is launched. 1. Entering Service Mode How To Enter Service Mode On Canon Printer | PDF - Scribd
The Canon Service Tool v4718 is a specialized, proprietary utility used by technicians to maintain and repair Canon PIXMA and MAXIFY series printers. It is primarily known for its ability to reset the "Waste Ink Absorber" counter, which prevents the printer from locking up once its internal sponges are saturated with ink. The Role of Service Tool v4718
Modern inkjet printers include a reservoir (absorber) that collects excess ink during cleaning cycles. To prevent leaks, Canon installs a software counter that disables the printer when it estimates the pads are full. Waste Ink Resets
: The tool allows users to reset this counter to 0% after the pads have been cleaned or replaced. EEPROM Management PIXMA TS Series
: Technicians use it to read and write EEPROM data, which contains printer settings and history. Error Clearing
: It can clear specific hardware-lock errors like "Error 5B00," which indicates the absorber is full. Operating Requirements
For the tool to work, the printer must be placed into a specific state known as Service Mode . This usually involves a sequence of button presses: Turn the printer off. Stop/Reset (triangle) button. Release the button while continuing to hold Power. button 5 or 6 times (depending on the model). Release both buttons.
If the printer is not in Service Mode, the software will return "Error 002" or "Error 006," indicating a communication failure. Risks and Verification
While v4718 is considered a "verified" and stable version for many mid-range PIXMA models, it is not official consumer software. Use carries several risks: Permanent Lockout
: If an incorrect Service Tool version is used, or if the reset is attempted too many times without physical pad replacement, the printer's logic board may permanently lock, requiring a professional hardware replacement.
: Since Canon does not publicly distribute this tool, downloads from third-party sites often contain "alleged" versions that may harbor viruses. Physical Damage
: Resetting the software without cleaning the physical pads can cause ink to overflow into the printer’s internal electronics. Comparison with Other Versions Key Use Case Older models (MP, MG series) Wide support for G-series and MG series Necessary for newer models with updated security firmware If you are looking to fix a specific error, I can help you: Identify if is compatible with your specific model exact button sequence for your printer's Service Mode Troubleshoot Error 002 or 006 if the tool isn't connecting particular Canon model
Canon MG6820 Ink Absorber Full? Expert Troubleshooting Guide
PIXMA TS Series
- TS3100, TS3300, TS3400, TS3500, TS5000, TS6000 (partial support).
What is Canon Service Tool v4718?
The Canon Service Tool (Version 4718) is a proprietary software utility designed for Canon technicians. It runs on Windows (7, 8, 10, and 11) and interfaces directly with the printer's EEPROM (Electrically Erasable Programmable Read-Only Memory).
Unlike standard printer drivers, the Service Tool bypasses user restrictions to perform low-level maintenance, including:
- Resetting the Waste Ink Counter: The most common use. It tells the printer that the internal ink-absorbing pads are "empty" (even if they are physically full).
- Clearing EEPROM Errors: Resolving fatal logic errors.
- Changing Destination (Region): Converting a Japanese or European printer to US/World settings.
- Ink Absorption Setting: Adjusting how the printer counts waste ink.
Why version 4718? Earlier versions (like 3400, 4700) lacked support for newer firmware updates. Version 4718 is known for its broad compatibility with printers manufactured between 2015 and 2020.
Part 2: Why "Verified" Matters – The Danger of Fake Tools
A simple Google search for "Canon Service Tool v4718 free download" yields hundreds of results. The vast majority are dangerous. Here is what happens when you download an unverified version:
How to Verify the File Yourself
Once downloaded, verify integrity:
- MD5 checksum of the real Canon Service Tool v4718 is:
b4d7a3e9f1c2a86b5e0d9f8c7a1b2e3d(example – always search current forums for latest hash). - Use PowerShell:
Get-FileHash ST4718.exe -Algorithm MD5