Download Software Ht Motorola: Gp 2000 Programming Fix [repack]

How to Program Your Motorola GP2000 : Software Downloads & Troubleshooting Motorola GP2000

(part of the Alpha Series) remains a popular, rugged choice for two-way communication. However, because it is an older, obsolete model, finding the right software "fix" or programming tools can be a challenge.

Whether you need to update frequencies or fix a software glitch, here is everything you need to get your back in peak condition. 1. Essential Tools for Programming To program the Motorola GP2000 , youEnsure you have the following hardware components: Programming Cable: The uses the same programming cable as the Radius CP200 . Programming Software (CPS): The genuine software for the

is PMVN4059. Note that if you have a European model (P020 or P030), the software may differ slightly.

A Dedicated Windows PC: Most Motorola CPS tools are designed exclusively for Windows. 2. Where to Download the Software

is no longer actively supported by Motorola Solutions, official downloads are typically restricted to authorized partners or historical archives: Download Software Ht Motorola Gp 2000 Programming Fix

Radiotronics: This is a reputable source where you can purchase and download the Motorola PMVN4059 GP2000 Software.

Motorola Support: For general firmware "fixes" or hardware testing on newer Motorola devices, you can use the Motorola Software Fix Tool (formerly Rescue and Smart Assistant). 3. Step-by-Step Programming Process Once you have the software and cable, follow these steps:

Enter Programming Mode: Hold the PTT (Push-To-Talk) and the top side button simultaneously while turning the radio on.

Connect to PC: Plug the programming cable into the lower port of the GP2000's accessory connector and your computer.

Read the Radio: Open the CPS software and select "Read" to pull the current configuration (codeplug). How to Program Your Motorola GP2000 : Software

Edit and Write: Update your frequency lists or settings, then select "Write" to upload the new data to the radio. 4. Common Troubleshooting & Fixes Programming Motorola GP2000 (Alpha Series) Two Way Radios

1 Jun 2020 — by Tech on 01/06/2020. Motorola GP2000 is an obsolete (cancelled) two-way radio from Motorola Solutions. We've created this guide. Radiotronics UK Motorola PMVN4059 GP2000 Programming Software

---

1. Understanding the Software Requirements

The Motorola GP2000 is a budget-friendly radio from the early 2000s. It requires specific Customer Programming Software (CPS) known as GP2000 CPS.

• Common Version: The most stable version is typically R02.00 or similar.
• The Problem: Many users download generic programming software that claims to support the GP2000 but lacks the specific drivers or firmware patches for the radio's logic board.

Part 2: The Critical “Programming Fix” – Making it Work on Windows 10/11

This is the core of your search. You can download the software, but it will crash on launch or fail to read the radio. Here is the fix:

Common fix: Programming fails or COM port not detected

• Symptoms: Programming software times out; “No radio detected”; intermittent writes.
• Fix steps:
  1. Unplug cable, uninstall any Prolific drivers if present (they can be unstable).
  2. Install FTDI drivers and connect cable; ensure Device Manager shows FTDI USB Serial Converter on a COM port.
  3. In programming app, set baud rate to 9600 (or model default) and matching COM port.
  4. If still failing, disable Windows serial port power management: Device Manager → Ports → COMx → Power Management → uncheck “Allow the computer to turn off this device to save power.”
  5. Try a different USB port (preferably USB2.0), and avoid USB hubs.
  6. If write fails mid-way, reboot PC and radio, re-read codeplug, then attempt write again with radio battery fully charged.

Fix B: The Compatibility Layer + Registry Hack (Native Windows 10/11)

If you don’t want a VM, use this 5-step fix: Common Version: The most stable version is typically R02

Step 1: Disable Driver Signature Enforcement

• Restart your PC. During boot, press F8 (or Shift+Restart > Troubleshoot > Startup Settings > Disable driver signature enforcement).

Step 2: Install the Legacy Serial Driver

• The Motorola GP2000 programming cable (RIB-less) often uses a Prolific 2303 chip. Windows 10/11 blocks old Prolific drivers.
• Fix: Download Prolific Driver v3.2.0.0 (from Prolific’s legacy archive). Install it manually via Device Manager > Update Driver > Let me pick > Have disk.

Step 3: Run CPS Setup in Windows XP SP3 Mode

• Right-click setup.exe > Properties > Compatibility.
• Set: Windows XP (Service Pack 3).
• Check: Disable fullscreen optimizations and Run as administrator.

Step 4: The “Runtime Error 13” Fix

• If the software opens but crashes when reading the radio, the issue is the serial port timing.
• Fix: Go to Device Manager > Ports (COM & LPT) > USB Serial Port > Properties > Port Settings > Advanced.
• Change COM Port Number to COM1 or COM2 (GP2000 CPS only looks at COM1-4).
• Set Latency Timer to 2 msec (minimum).

Step 5: The NVRAM Write Error Fix (#1302)

• Error: “Communication failed with radio (1302)”
• This means your cable is wrong or Windows is too fast.
• Fix: Download GP2000 Timing Fix (a small utility found on GitHub or Batlabs). This utility slows down the serial handshake. Run it before launching the CPS.

5. Recommended Legal Workflow

1. Obtain software through a Motorola dealer (even as an individual, many will program for a small fee).
2. Purchase a genuine programming cable (e.g., from BlueMax49ers or Motorola original).
3. Use an old laptop with native serial port or tested USB adapter.
4. Read the radio first to verify communication.
5. Save original codeplug before making changes.