Code No 70166 Zip ~repack~ — Drill Manual Revised 1990 Army
The Army Code No. 70166 (The Drill Manual, Revised 1990) is the foundational text for military precision and discipline. This guide outlines the core principles and movements found in that manual. 💂 Principles of Drill
Purpose: To produce a soldier who is proud, alert, and obedient. Discipline: Instills instinctive obedience to orders.
Uniformity: Ensures all movements are identical across the unit. 🗣️ The Words of Command Commands are divided into three distinct parts: Cautionary: The "warning" (e.g., Squad). Executive: The "action" signal (e.g., ATTEN-TION). Pause: A rhythmic break between the two for preparation. 🧍 Static Positions Heels together and in line. Feet at an angle of 30 degrees. Arms straight; thumbs behind the seam of the trousers. Head up, eyes looking at their own level. Stand at Ease Carry the left foot 30cm (12in) to the left. drill manual revised 1990 army code no 70166 zip
Hands behind the back; right hand placed in the palm of the left. Weight distributed evenly on both feet. 👣 Movement and Marching Quick March Standard pace is 75cm (30in). Standard cadence is 120 paces per minute. Arms swing waist-high, straight at the elbow. Command given as the left foot hits the ground. Take a check pace with the right foot. Bring the left foot sharply in line with the right. 🫡 Saluting Right Hand: Brought up in a circular motion. Palm: Facing full to the front.
Finger: Forefinger 1 inch above the right eye (or touching the peak of the cap). The Army Code No
Timing: Start the salute 5 paces before meeting an officer; finish 1 pace after passing. 🛠️ Arms Drill (Rifle Movements) Shoulder Arms: The basic carrying position. Present Arms: The highest form of salute with a weapon.
Order Arms: The rifle butt rests on the ground beside the right foot. What It Is
What It Is
- Title: Drill and Ceremonies (FM 22-5 or similar field manual)
- Code 70166 – This is likely a stock number or document control number, not a standard FM/TC number
- 1990 Revision – Reflects Cold War–era drill procedures, just before major changes in the 1990s
What Exactly is Army Code No. 70166?
To the uninitiated, "Army Code No. 70166" might look like an arbitrary string of numbers. In reality, it is a specific stock control or cataloging number used by the U.S. Army Printing and Publications Directorate. During the late 1980s and early 1990s, the Army transitioned many of its field and training manuals from simple "FM" (Field Manual) designations to a dual system that included a unique publisher’s code.
Army Code No. 70166 corresponds to a specific printing run and revision of a drill and ceremonies manual. While the official title is likely FM 22-5 (Drill and Ceremonies) , this code identifies a particular binding, date stamp, and distribution batch from 1990. Collectors prize code-specific versions because they often include minor errata, updated uniform references (e.g., the transition from olive green to BDU camouflage), and changes in ceremonial protocol that differ from earlier 1980s or later 1990s editions.
Teaching plan (4 sessions, platoon level)
- Session 1 — Fundamentals: attention, stand at ease, marching basics, and dressing.
- Session 2 — Squad drills: formation changes, column movement, flanks, and commands.
- Session 3 — Weapons drill: safe handling, ceremonial rifle movements, and salutes.
- Session 4 — Full rehearsal: combined maneuvers, ceremony run-through, critique and standards check.