Epson L3150 Resetter Adjustment Program Free Full Link May 2026

Title: Epson L3150 Resetter: How to Download and Use the Adjustment Program for Free

If you own an Epson L3150 printer, you have likely encountered the dreaded "Service Required" error message. This usually happens after a certain number of print cycles, accompanied by two red lights blinking on the control panel. When this happens, the printer stops working entirely, leaving you scrambling for a solution. epson l3150 resetter adjustment program free full

The most cost-effective way to fix this without visiting a service center is by using the Epson L3150 Resetter Adjustment Program. Here is a guide on how to find the full version for free and how to use it safely. Title: Epson L3150 Resetter: How to Download and

Step-by-Step Guide: How to Use the Epson L3150 Resetter Adjustment Program

Follow these instructions precisely. Skipping steps will result in an "Communication Error" or a failed reset. Check the box next to "Main pad counter"

Step 6: Perform the Reset

  1. Check the box next to "Main pad counter".
  2. Also check "Borderless pad counter" (reset both).
  3. Click the "Initialization" or "Check" button.
  4. A warning box will appear: "Do you want to initialize the counter?" Click "Yes".
  5. Wait 10 seconds. You will see both counters change to 0%.
  6. Click "OK" and then "Finish".

Step 2: Launch the Program

  • Extract the ZIP/RAR file using 7-Zip or WinRAR.
  • Right-click AdjProg.exe → Run as Administrator.
  • Select your printer model: Epson L3150 from the dropdown.

Prerequisites

  1. A Windows PC (Mac users need VirtualBox or Bootcamp).
  2. A USB cable (do not use Wi-Fi for resetting).
  3. Your Epson L3150 turned ON with the error lights flashing.
  4. Disable your antivirus temporarily (the program modifies system settings).

Step 3: Select Your Printer Model

  1. The program will open a "Model Name" window.
  2. Select "Epson L3150 Series" from the dropdown list.
  3. Click "OK" or "Particular adjustment mode".

Step 4: Reset the Waste Ink Counter

  • In the main menu, click Waste ink pad counter.
  • A window will show two counters: "Main Pad Count" and "Platen Pad Count". Both will likely be at 100% or a high number.
  • Check both boxes.
  • Click Initialization (or "Reset").
  • Wait 10 seconds. You’ll see a message: "Successfully initialized."