Firmware Reset | Samsung Ml 2160 2165 2160w 2165w Exclusive

Guide to Firmware Resets for Samsung ML-2160 & ML-2165 Series Samsung ML-2160 Go to product viewer dialog for this item.

, and their wireless "W" counterparts are legendary for their compact size and efficiency, but they often present a hurdle for users wanting to use third-party toner or refills: the firmware chip lock. A firmware reset can bypass these restrictions, allowing the printer to function without requiring a new, expensive OEM chip every time the toner is refilled. 1. Preparation: Gather Your Printer's "Identity"

Before attempting any reset, you must know your printer's specific details. Firmware fixes are often tied to the unique serial number and CRUM (Customer Replaceable Unit Monitor) of the machine.

Print Configuration Report: Hold the Print Screen/WPS button (above the power button) for about 10 seconds until the LED flashes once, then release. Look for the Serial Number and Firmware Version.

Print Supplies Information: Hold the Print Screen/WPS button again for approximately 15 seconds until the LED stays solid green, then release. This report will list the CRUM number. 2. Standard Factory Reset (Non-Firmware Fix)

If you are just experiencing connectivity or minor printing errors and do not need to bypass toner chips, a standard factory reset can restore original settings. Turn on the printer. firmware reset samsung ml 2160 2165 2160w 2165w

Press and hold the "Go" button for about 5 seconds to enter the setup menu. Navigate to Settings > General Settings. Select Restore Factory Settings and confirm.

Wait for the printer to restart (usually takes about one minute). 3. Firmware Reset (The "Fix" for Refills)

To use refilled cartridges without a new chip, you typically need a "Fix Firmware" file. This process essentially tells the printer to ignore the chip counter. Software Method: Connect your printer to a PC via USB cable.

Obtain the firmware fix file (often in .hd or .exe format) from a specialized provider like eReset or ORPYS.

Drag and drop the firmware file onto the update executable provided in the package. Guide to Firmware Resets for Samsung ML-2160 &

The printer will flash its LEDs while programming. Do not turn it off during this 1–2 minute process.

Once the printer reboots itself, remove or tape over the chip on the toner cartridge. The printer should now show 100% toner regardless of the actual level. 4. Alternative: Hardware Chip Reset

If you prefer not to touch the firmware, you can reset the cartridge itself:

Manual Reset: Some third-party cartridges have a small button on the chip. Open the lid, let the carriage move, and press the button with a paperclip until the lights blink and stop.

External Resetter: You can buy small handheld devices that press against the chip pins to reset the counter to "Full". Turn off printer

---

4) Full firmware reflash (advanced)

Purpose: Recover corrupted firmware or upgrade/downgrade. Use only manufacturer firmware for your exact model and region.

Summary steps (Windows):

1. Download official firmware/firmware update utility for your exact model ML-2160 / ML-2165 / ML-2160W / ML-2165W from HP/Samsung support. Confirm model number and region. Unzip if needed.
2. Install Samsung/HP USB Printer Driver for the model. Connect the printer via USB and ensure Windows recognizes it. Disable other USB devices that might interfere.
3. Run the firmware update utility as Administrator. The tool will detect the printer and the current firmware.
4. Follow prompts to upload new firmware. Do NOT disconnect power or USB during the update. Wait until the utility reports success and the printer restarts.
5. After firmware flashes, power cycle the printer and reinstall/configure settings as needed.

If manufacturer tool fails to detect printer:

• Try different USB port and cable (use direct PC port, not hub).
• Reinstall drivers.
• Try on another Windows PC.

If you cannot find official firmware:

• Avoid third-party/unofficial firmware. Using such files can brick the printer and void warranty.

Recovery for bricked printers:

• If firmware upload was interrupted and the printer is unresponsive, try repeated attempts with the official tool.
• If still dead, service center repair is likely required.

---

Method 4: Hard Reset via “Power + Cancel + WPS” (Alternate button combo)

For stubborn cases, especially after firmware update failures.

1. Turn off printer, unplug, wait 30 seconds.
2. Plug in but do not power on.
3. Press and hold Power + Cancel + WPS buttons simultaneously.
4. Keep holding for 15–20 seconds.
5. Release all buttons. Printer should power on and reset.

---

Step 3: Disable Antivirus and Firewall

Temporarily disable Windows Defender or any third-party security software. These tools often block the low-level USB communication required for firmware flashing.