Gp L80180 Driver __link__ «RECENT — 2026»

Gprinter GP-L80180 is an 80mm thermal receipt printer manufactured by

(Gprinter). It is commonly used in retail and hospitality for high-speed ticket and receipt printing. 易标签软件 Driver Availability and Compatibility

The driver for the GP-L80180 series is compatible with multiple versions of Windows and can be sourced from various official and third-party repositories: GP-L80180-Drivers - Guangzhou Fangtek Electronic Co., Ltd. 2019-06-26 15:22:50 vbk19100828 19469. : Download. Guangzhou Fangtek Electronic Co., Ltd.

Gprinter GP-L80180 is a high-speed thermal receipt printer typically used in retail and hospitality environments. Below are the details for obtaining the correct driver and setting up your device. Driver Download Options

You can find the necessary drivers through these official and verified channels: Official Gprinter Download Center : The most reliable source is the Gprinter Service Page , where you can download the GP 80 Receipt Series Universal Driver

. This driver covers the L80180 model and is compatible with Windows versions ranging from XP to Windows 10. Gainscha POS Printer Driver

: For specific 80mm receipt series utilities and drivers, you can also check the Natsys Download Index , which hosts specific files for the Third-Party Professional Drivers

: For label design or specific barcode software integration, BarTender by Seagull Scientific provides specialized Windows drivers for Gprinter models. 佳博打印机官网 Printer Specifications Printing Method : Direct thermal. Printing Speed : High speed at approximately Resolution : 203 DPI. Interface Options : Typically supports USB + Serial connections. Media Support : Standard thermal roll paper. Command Set : Fully compatible with 佳博打印机 Installation Tips Connection

: Ensure the printer is powered on and connected via USB before running the installer. Driver Selection gp l80180 driver

: During the installation of the universal driver, select "GP-L80180" or the "80mm Series" from the list of models. Port Configuration

: If the printer does not print after installation, check the Printer Properties > Ports

tab in Windows and ensure the correct port (e.g., USB001) is selected. natsys.com.br set up the Ethernet interface for this printer?

Drivers-Thermal Printers,Receipt Printer,Barcode ... - Gprinter

Drivers-Thermal Printers,Receipt Printer,Barcode Printers,Label Printer,Ticket Printers,Cloud Printers,Portable Printers-Gprinter. 佳博打印机官网 GP-C80180I - Gprinter

The Gprinter GP-L80180 is a thermal label printer primarily used for shipping labels, barcodes, and receipt printing. To get it up and running, you need specific drivers and tools for your operating system. 📥 Driver Downloads

You can find the official and verified drivers at these locations:

Official Gprinter Download Center: Access the Barcode Printer Driver Gprinter GP-L80180 is an 80mm thermal receipt printer

for Windows 2000, XP, Vista, 7, and 8 (32/64-bit). This portal also provides the Linux CUPS driver for 80mm printers. Guangzhou Fangtek: Offers a dedicated GP-L80180 Driver

download specifically categorized for thermal transfer and direct thermal labels.

DriverIdentifier: Provides a technical breakdown of the Windows 10 driver, including specific hardware IDs like USB\VID_8866&PID_0100 for manual identification. ⚙️ Quick Setup Guide

Connection: Ensure the printer is connected via USB before starting the installation.

Installation: Run the .exe driver file. For Windows 10/11, use "Administrator" mode to prevent permission errors.

Port Selection: During setup, select the USB Virtual COM or the specific USB port assigned to the device.

Label Design: For barcode creation, this printer is often compatible with BarTender (UltraLite edition) or other standard label design software. 💡 Troubleshooting Tips

Empty Labels: Ensure your thermal paper is facing the correct direction; thermal coating must face the print head. ESC/POS (default) – for receipts

Red Light Error: This usually indicates the paper has run out or the sensor needs calibration (typically done by holding the "Feed" button until it beeps).

Incomplete Printing: Double-check the Driver DPI settings (likely 203 DPI) to match your label design size. If you'd like, I can help you find: Specific BarTender setup steps for this model.

The correct thermal label sizes (like 4x6) available for purchase.

A guide on how to calibrate the sensor if your labels are skipping. GP-L80180-Drivers - Guangzhou Fangtek Electronic Co., Ltd.

GP-L80180-Drivers-Printing Labels丨 Thermal Transfer Labels丨 Direct Thermal Labels丨 Thermal Transfer Ink Ribbons丨 Wash Care Labels/ Guangzhou Fangtek Electronic Co., Ltd.

Drivers-Thermal Printers,Receipt Printer,Barcode ... - Gprinter

Drivers-Thermal Printers,Receipt Printer,Barcode Printers,Label Printer,Ticket Printers,Cloud Printers,Portable Printers-Gprinter. 佳博打印机官网

4.3 Emulation Mode

  • ESC/POS (default) – for receipts.
  • TSPL – for label/tag printing (if hardware supports).
    Switch via DIP switch #4 or configuration utility.

Signal Connection (to controller):

  • PUL+ / PUL-: Step pulse signal
  • DIR+ / DIR-: Direction signal
  • ENA+ / ENA-: Enable (optional, can be left unconnected)

Most opto-isolators work on 5V to 24V. If using 5V from an Arduino, connect PUL+ to 5V and PUL- to the step pin.

Key Specifications:

  • Supply Voltage: 24V–80V DC (Nominal: 60V)
  • Phase Current: Up to 7.8A peak (adjustable via DIP switches)
  • Microstep Resolution: 1, 2, 4, 8, 16, 32, 64, or 128 microsteps/step
  • Signal Input: Opto-isolated (5V–24V compatible, eliminating the need for level shifters)
  • Protection Features: Over-voltage, under-voltage, over-current, and short-circuit protection

Unlike basic drivers (e.g., A4988), the GP L80180 is built for industrial durability. It uses a large heatsink or active cooling fan to dissipate heat during prolonged high-torque operations.

Прокрутить вверх