Grundig 8-in-1 Universal Remote Control is designed to replace up to eight individual remotes, allowing you to manage devices like TVs, DVD players, satellite receivers, and HiFi systems from a single unit. Most Grundig-branded replacement remotes come pre-programmed to work with roughly 90% of Grundig devices straight out of the box. AVSL Group Initial Setup: Battery Installation
Remove the battery compartment cover on the back of the remote. 2 x AAA batteries
, ensuring the polarity (+/-) matches the markings inside the compartment. Replace the cover.
Most modern Grundig remotes feature internal memory that saves your settings even during battery changes. AVSL Group Programming Methods
If the remote does not automatically control your device, you can use one of these three primary setup methods: 1. Direct Code Entry (Manual)
This is the fastest method if you have the 4-digit code for your brand. AVSL Group Turn on the device you want to control (e.g., your TV). Press and hold the corresponding Device button
(TV, DVD, SAT, etc.) for about 3 seconds until the power button or LED indicator stays lit. 4-digit code from the manual’s code list using the number keys. If the code is valid, the indicator light will go out. Aim the remote at the device and press . If the device turns off, the setup is successful. AVSL Group 2. Manual Search
Use this method if the specific codes from the list do not work or if your brand is not listed. Turn on your device manually. Press and hold the Device button until the LED stays on.
button repeatedly (one press at a time) while aiming at the device.
As soon as the device reacts (turns off or changes channel), press the Device button once to save the code. 3. Automatic Search 8-in-1 Universal Remote Control - AVSL
Grundig 8-in-1 universal remote control Go to product viewer dialog for this item. grundig universal remote control 8 in 1 manual
allows you to manage up to eight different devices—including TVs, DVDs, satellite receivers, and HiFi systems—using a single unit. To get started, you can find the complete manual instructions on Scribd or AVSL. Setup Methods
There are three primary ways to program your Grundig remote for a new device: Direct Code Entry: Switch on the device you want to control (e.g., your TV).
Press and hold the corresponding Device button (e.g., TV) for about 3 seconds until the indicator light stays on.
Enter the 4-digit code for your device's brand from the code list provided in the manual.
If the code is correct, the indicator light will turn off. Test the power and volume to verify. Manual Code Search:
Turn on your device and press and hold the Device button and the Power button simultaneously until the LED lights up.
Press the Power button repeatedly until your device turns off.
Immediately press the Device button to lock in the code. The LED will turn off. Auto Code Search: Turn on the target device and point the remote at it.
Press and hold the Device button until the LED light stays on.
The remote will begin cycling through codes. When the device responds (e.g., turns off), quickly press OK or Enter to save the code. Additional Features Grundig 8-in-1 Universal Remote Control is designed to
Factory Reset: To restore original settings, remove one battery, press a button to fully discharge the unit, reinsert the battery, and then press digits 2 and 8 simultaneously within 6 seconds.
Code Identification: If you programmed the remote using a search method and want to know the code, you can use the identification mode. Hold Setup until the light stays on, press the Device button, then press the numbers 1, 2, 3, and 4 sequentially to see how many times the LED flashes for each digit. 8-in-1 Universal Remote Control - AVSL
To program your Grundig 8-in-1 Universal Remote Control , you can use either a direct code entry method or a manual search. Ensure you have fresh AAA batteries installed before starting. Method 1: Direct Code Entry
This is the fastest way if you have the specific code list for your device.
Power On: Manually turn on the device you want to control (e.g., your TV).
Select Device: Press and hold the corresponding device button (e.g., TV, DVD, SAT) for about 3 seconds until the power button light stays on.
Enter Code: Use the number keys to enter the 4-digit code for your brand. The light will turn off if the code is valid.
Test: Point the remote at the device and press POWER. If the device turns off, the setup is successful. Method 2: Manual Search Use this if you do not have the code for your brand. Power On: Turn on your device.
Enter Setup: Press and hold the [Device] key and the Power key simultaneously until the red LED stays lit.
Initiate Search: Press the Power key again; the LED will begin flashing. METHOD 2: AUTOMATIC CODE SEARCH Use this method
Scan: Repeatedly press and release the CH+ (or Power) button until the device turns off.
Save: Once the device responds, immediately press the [Device] key once to save the code. The LED will turn off. Troubleshooting & Maintenance
Factory Reset: If the remote is unresponsive, press 2 and 8 together for 6 seconds (LED blinks twice), then enter 981.
Simple/Easy Mode: If only some buttons work, you may have accidentally activated "Simple Mode." To exit, enter code 970 and press EXIT.
Official Manuals: You can find full documentation on Scribd or manufacturer support pages like Hama for similar models. Grundig Universal Remote Setup Guide | PDF - Scribd
Use this method if you do not know the code or if the direct code did not work.
| Problem | Solution |
| :--- | :--- |
| Remote is not working. | 1. Check battery polarity.
2. Replace with new batteries.
3. Check if the device mode is selected correctly. |
| Device does not respond. | 1. Check if the device is plugged in.
2. Try a different code from the list.
3. Ensure no obstructions block the sensor. |
| Partial functionality. | Some codes may only operate power. Try other codes listed for your brand to regain full menu and volume control. |
| LED does not light up. | Batteries are depleted. Replace immediately. |
Q: Is the Grundig 8 in 1 compatible with my Roku or Fire Stick? A: Only if those devices use standard IR. Most Roku sticks use RF/Bluetooth. Look for the Grundig model "URC 81" which specifically lists streaming players.
Q: Why is there no cursor/OK button for my Smart TV menu? A: You must ensure you are in "TV" mode. The D-pad (arrow keys) only works if the code supports your TV's smart functions. Try a different code from the list.
Q: Can I buy a replacement manual? A: You don't need to. Grundig offers PDF downloads on their official support site. Search "Grundig Support PDF" and your remote model number (found inside the battery compartment).
Most soundbars connect via the AMP or AUX button.