Hi Sharp Dvr Reset Password Upd

To reset the password for a Hi Sharp DVR (often associated with models like the UPD or KD series), you can use several methods ranging from software-based recovery to hardware "hard" resets. 🔑 Method 1: The "Forgot Password" Software Reset

Most modern Hi Sharp units include a recovery feature on the login screen. Open Login Screen:

Attempt to log in to your DVR directly using the monitor and mouse. Select "Forgot Password":

Look for a question mark icon or a "Forgot Password" button next to the password field. Generate Dynamic Code: The system will often display a Dynamic Code Contact Support:

Hi Sharp requires you to take a screenshot or photo of this dynamic code and email it to sales@hisharp.com.tw

or your regional distributor. They will provide a one-time temporary password. ⚙️ Method 2: Physical Hardware Reset

If you cannot access the software menu, you may need to perform a physical reset. Reset Button:

Check the back or bottom of the unit for a small pinhole labeled "Reset." Press and hold it for 15–30 seconds while the device is powered on. CMOS Battery Removal: Disconnect power and open the DVR casing. Locate the small round silver battery (CR2032) on the motherboard. Remove it for 2–5 minutes , then reinsert it.

This often resets the system clock to 01-01-2000, allowing you to use common "date-based" default passwords like 🛡️ Method 3: Default Credentials

If the unit has been factory reset, try these common default combinations: (Leave blank) 💡 Quick Tips for Success Check the App: If your DVR is linked to the Superlive Plus Hi Sharp EX

app, you may be able to reset the password through the "Remote Config" settings. Power Cycle: hi sharp dvr reset password upd

Always restart the DVR after a hardware reset to ensure the new settings take effect. Firmware Updates:

Once back in, update your firmware to the latest version to ensure you have the most secure password recovery options for the future. FAQ - Support | HI SHARP INTELLIGENCE

For Hi Sharp DVR units, the modern method for password recovery involves generating a dynamic code directly from the device's local interface. This code must then be shared with an authorized distributor or Hi Sharp technical support to receive a temporary unlock key. Password Reset Procedure (Software)

If you cannot access your system, follow these steps according to official Hi Sharp Intelligence guidelines:

Navigate to the Login Screen: On your DVR/NVR local interface, select Forget Password or Retrieve Password.

Generate Dynamic Code: Click on the Dynamic Code page. A unique code or QR code will appear on the screen. Submit for Verification: Take a clear photo or screenshot of the Dynamic Code page.

Email the image along with your region, model number, and serial number to sales@hisharp.com.tw or contact your local regional distributor.

Input Recovery Key: Once you receive the recovery code from support, enter it into the DVR's prompt to reset your admin password. Hardware & Default Credentials

If software recovery is unavailable, you may attempt a hard reset or use default credentials if the unit has been recently wiped.

Default Credentials: For initial setup or after a successful factory reset, the default username is typically admin and the default password is 123456. Physical Reset: To reset the password for a Hi Sharp

Reset Button: Check the back or side panel for a pinhole reset button. Press and hold this for 5–30 seconds while the device is powered on until you hear a beep.

Motherboard Jumper: If no button is visible, you may need to open the casing and locate two pins marked "RESET" or "CLR". Shorting these pins with a screwdriver for 30 seconds during power-up can force a factory reset on many H.264 models.

CMOS Battery: Removing the coin-cell battery from the motherboard for several minutes can sometimes reset the system clock and clear saved passwords on older models. Support Resources

Official Downloads: You can find manual and firmware updates on the Hi Sharp Support Downloads page.

IP Tool: To find your device on a network for web-based management, use the Hi Sharp IP Finder.

Do you have the model number of your DVR so I can find the specific reset pin locations for that unit? FAQ - Support | HI SHARP INTELLIGENCE

Note: Hi Sharp devices are often rebranded OEM units (frequently using HiSilicon chips). The most common method below works for 90% of models. If it fails, check for a physical reset button on the motherboard.

Why You Are Here: The "Hi Sharp DVR Reset Password UPD" Problem

Users searching for "hi sharp dvr reset password upd" typically face one of three scenarios:

Password Lost: The admin password was changed years ago and never documented.
Device Locked: Too many failed login attempts triggered a permanent lockout.
Corrupted Update (UP-D): A failed firmware update (UP-D) caused the device to reject the old password.

Before we begin, note that Hi Sharp (often written as HiSharp or Hi-Sharp) is a popular OEM manufacturer of Dahua and Hikvision-based hardware. The reset procedure often shares DNA with those major brands, but has unique methods.

Method 4: Factory Reset via Internal Jumpers (Hardware)

For advanced users only.

Power off the DVR and open the case.
Locate the Clear CMOS jumper (labeled CLR_CMOS, RESET, or PWD).
Short the jumper pins for 5–10 seconds (or move jumper to reset position).
Reassemble and power on. Password reverts to default.

⚠️ This may reset all settings (network, recording schedules, etc.).

If You Still Can't Log In

Try common default passwords after reset: 123456, 888888, 666666, password, 12345, or blank.
Default usernames: admin, administrator, user, 888888.

Final tip: Once you regain access, write down your new password and store it securely. Consider setting up security questions if available.

Section 6: When to Call a Professional

If you have tried:

The security code email method.
The hardware jumper reset.
The .upd firmware reflash.

...and the DVR remains locked, your flash memory chip may be dead. Signs include:

The DVR boots to a black screen.
The password reset never saves (reverts to old password after reboot).
The device beeps continuously.

In this case, contact Hi Sharp authorized service centers. They have JTAG or serial console tools to manually reflash the bootloader. This costs approximately $50-$100 USD depending on your region.

If you found a specific "UPD" post

If you were referring to a specific "update" method where you put a file on a USB stick:

Do not do this unless the file came directly from Sharp Support. Flashing incorrect firmware to bypass a password can "brick" the DVR (make it permanently unusable).

To help you further, please provide:

The Model Number (e.g., Sharp DVR-N800H, etc.).
The Date and Time currently showing on the screen (if incorrect, note that too).
Is the DVR connected to the internet right now?

Disclaimer: This information is for educational purposes and to assist owners in recovering access to their own devices. Attempting to bypass security measures on devices you do not own is illegal.

After regaining access: recommended actions

Immediately change the default password to a strong, unique one (12+ characters, mix of letters, numbers, symbols).
Enable firmware updates and update to the latest firmware from the vendor.
Configure network securely: use a strong admin password, restrict remote access (VPN or whitelist IPs), disable UPnP if unnecessary, and place the DVR on a segmented network or VLAN.
Regularly back up critical footage off-device.

Sharp DVR Password Reset Guide

If you are locked out of your Sharp DVR, the method to reset the password depends heavily on the specific model and the firmware version installed. Most Sharp DVRs are rebranded OEM units (often manufactured by companies like Dahua or OEM generic brands), meaning the interface may vary.

Here are the three most common methods to reset the password: Note: Hi Sharp devices are often rebranded OEM