How To Hard Reset Myki Watch 4 ^new^

Important Disclaimer: A hard reset (also known as a factory reset or master reset) will erase all personal data on your MYKI Watch 4. This includes:

After the reset, the watch will be in the same state as when you first unboxed it. You will need to re-pair it with your smartphone via the MYKI Fitness app.

1. Important Pre-Reset Warnings

Before proceeding with a Hard Reset, please note the following:

Troubleshooting: Common Issues After a Hard Reset

Final Note

If your MYKI Watch 4 is still under warranty and you are resetting it due to a malfunction (e.g., not syncing, battery drain, screen issues), perform the hard reset only after trying a simple restart (turn off/on). If problems persist after a hard reset, contact MYKI customer support – the device may have a hardware defect.

Complete Guide: How to Hard Reset MYKI Watch 4

Introduction

The MYKI Watch 4 is a sleek and feature-rich smartwatch that offers a range of functionalities to make your life easier. However, like any electronic device, it may encounter issues that require a hard reset. A hard reset, also known as a factory reset, will erase all data on the device and restore it to its original settings. In this guide, we will walk you through the steps to hard reset your MYKI Watch 4.

Before You Begin

Before performing a hard reset on your MYKI Watch 4, make sure to:

  1. Backup your data: A hard reset will erase all data on your device, including your contacts, messages, and fitness data. If you have not backed up your data, do so before proceeding.
  2. Charge your device: Ensure your MYKI Watch 4 has at least 50% battery charge to avoid any interruptions during the reset process.
  3. Understand the risks: A hard reset will erase all data on your device. Make sure you have no pending tasks or important data that may be lost.

Method 1: Hard Reset using the Watch Menu

  1. Press and hold the Power button on your MYKI Watch 4 until the menu appears.
  2. Scroll down to "Settings" and select it.
  3. Scroll down to "System" and select it.
  4. Scroll down to "Reset" and select it.
  5. Select "Factory Reset" to initiate the hard reset process.
  6. Confirm that you want to perform a factory reset by selecting "Yes".
  7. Wait for the device to reset and restart.

Method 2: Hard Reset using the MYKI App

  1. Open the MYKI App on your paired smartphone.
  2. Go to the device settings by tapping on the gear icon.
  3. Scroll down to "System" and select it.
  4. Select "Reset Watch" to initiate the hard reset process.
  5. Confirm that you want to perform a factory reset by selecting "Yes".
  6. Wait for the device to reset and restart.

Method 3: Hard Reset using the Hardware Buttons

  1. Press and hold the Power button and the Side button simultaneously for 10 seconds.
  2. Release the Power button but keep holding the Side button for another 5 seconds.
  3. Use the Side button to navigate to "Recovery Mode" and select it.
  4. Use the Side button to navigate to "Factory Reset" and select it.
  5. Confirm that you want to perform a factory reset by selecting "Yes".
  6. Wait for the device to reset and restart.

After the Hard Reset

After the hard reset, your MYKI Watch 4 will:

  1. Restart and display the boot screen.
  2. Guide you through the setup process, including language selection, Wi-Fi connection, and pairing with your smartphone.
  3. Restore to its original settings, with all data erased.

Troubleshooting

If you encounter any issues during the hard reset process, try:

  1. Recharging your device to ensure it has sufficient battery charge.
  2. Restarting your device and trying the hard reset process again.
  3. Contacting MYKI support for further assistance.

Conclusion

To hard reset your MyKi Watch 4 , you can use a hidden dial code directly on the watch or send a remote SMS command from a paired smartphone. Before starting, ensure your watch has at least 50% battery to prevent it from turning off during the reset process. Method 1: Using the Watch Dial Pad How to Hard Reset MYKI Watch 4

This is the quickest method if you have access to the watch screen. Wake the screen by pressing the Dial application on the watch interface. Enter the following code: A confirmation popup will appear; tap to begin the factory reset. Method 2: SMS Command (Remote Reset)

If the watch is paired with a phone and has a working SIM card, you can reset it remotely. Messages app on your paired smartphone. Start a new conversation with the phone number assigned to the SIM card inside the MyKi Watch 4 Type one of the following commands (must be lowercase): pw,123456,factory# pw,523681,factory#

Send the message. You should receive a reply from the watch stating "factory ok, reset.." Important Notes

: A hard reset will erase all personal data, apps, and settings, restoring the device to its original factory state. SIM Requirements

: For the SMS method to work, the watch must have cell service and be paired with the MyKi Watch application SeTracker 2 Force Restart

: If your watch is frozen and you just need to reboot it (not erase it), hold the

button until it turns off, wait a few seconds, then hold it again to turn it back on. Myki Family Are you resetting the watch to fix a software bug or because you are giving it to a new owner AI responses may include mistakes. Learn more Hard Reset MYKI Watch 4

There are two main ways to hard reset a MyKi Watch 4: using a secret dialer code directly on the watch or sending a specific SMS command from a paired smartphone. Method 1: Dial Code (Directly on Watch)

This is the fastest way if you have access to the watch screen. Press the Power button to wake up the screen. Open the Dialer application on the watch. Dial the code: *#174714#. Tap the Call button.

A confirmation popup will appear; tap Yes to begin the factory reset. Method 2: SMS Command (From Paired Phone)

Use this method if you need to reset the device remotely or via the paired SeTracker 2 app.

Requirement: The watch must have a working SIM card with active service. Step 1: Open the messaging app on your paired smartphone.

Step 2: Start a new conversation with the phone number assigned to the watch's SIM card.

Step 3: Send one of the following commands (case-sensitive): pw,123456,factory# pw,523681,factory#

Step 4: Wait for a reply. The watch should text back "factory ok, reset.." and then restart.

Battery: Ensure the watch is charged to at least 30% before starting to avoid damage during the reboot.

Data Loss: A hard reset will erase all settings, contacts, and historical data from the watch. Important Disclaimer: A hard reset (also known as

SIM Lock: If you are resetting because of a forgotten password or pairing issue, ensure the SIM card is not PIN-locked.

If you're having trouble with the SeTracker 2 app after the reset, would you like help re-pairing the watch or setting up a new account? Hard Reset MYKI Watch 4

To hard reset a MyKi Watch 4 Go to product viewer dialog for this item.

, you can use an SMS command from a paired phone or the device's dialer application. Method 1: SMS Command (Recommended)

This method is useful if you cannot access the watch menu or if it is remotely managed.

Ensure the watch is on with a working SIM card and active cell service. Open the Message app on the phone paired with the watch.

Send one of the following codes to the watch's phone number: pw,123456,factory# pw,523681,factory#

The watch should reply with a message like "factory ok, reset.." and will restart automatically. Method 2: Dialer Application

If you have physical access to the watch and the screen is responsive: Press the Power button to wake up the screen. Open the Dial application on the watch. Dial *#174714# and tap the Call button.

When the confirmation popup appears, tap Yes to begin the factory reset. Important Considerations

Data Loss: A hard reset will erase all personal information, contacts, and settings from the watch.

Battery: Ensure the watch is adequately charged before starting to avoid power failure during the reset process.

Pairing: After the reset, you will likely need to pair the device again using the SeTracker 2 or MyKi Watch application.

Are you performing this reset because you forgot a passcode or because the watch is not connecting to the app? Hard Reset MYKI Watch 4

How to Hard Reset MyKi Watch 4: A Step-by-Step Guide Performing a hard reset on your MyKi Watch 4 can resolve persistent technical glitches, clear personal data before selling the device, or fix connectivity issues with the parent app. Because these watches are designed for child safety, the reset process is more secure than a standard smartwatch and often requires a paired smartphone or a specific dialer code.

Below are the most effective methods to restore your device to factory settings. Method 1: The SMS Command Method (Most Reliable)

This method is ideal if the watch is paired with a phone but you cannot access the watch's internal menus. You will need a working SIM card inside the watch with active SMS service. Activity history (steps, calories, heart rate logs) Alarms

Check Connection: Ensure the watch is turned on and has a cellular signal.

Open Messaging: On the parent's phone, open your primary text messaging app.

Send the Reset Code: Send a text message to the watch's phone number with one of the following codes: pw,123456,factory# pw,523681,factory#

Note: Commands are case-sensitive; use lowercase exactly as shown.

Wait for Confirmation: You should receive a reply from the watch stating "factory ok, reset...".

Reboot: The watch will automatically restart and wipe all data. Method 2: Using the Watch Dialer

If you have physical access to the watch and it is responsive, you can initiate a reset directly from the interface using a hidden service code.

Wake the Device: Press the Power button to turn on the screen.

Open Dialer: Navigate to and open the Dial application on the watch. Enter Code: Type in *#174714# using the on-screen keypad.

Confirm: Tap the Call button. A popup will appear asking for confirmation; tap Yes.

Resetting: The device will begin the wipe process. Do not turn it off until it finishes. Method 3: Unpairing via the MyKi Watch App

For many users, the "reset" is part of a re-registration process. To completely clear the watch's association with your account, you must unpair it via the official app. Launch App: Open the MyKi Watch app on your smartphone.

Settings: Go to the settings menu for your specific MyKi 4 device.

Remove Device: Look for the option to "Remove Watch" or "Restore Factory Settings".

Clear App Cache: To ensure a clean start, you can also go to the "Me" tab in the app, select Settings, and tap "Clear Data" to remove cached info from the phone. Troubleshooting Common Issues

SIM Card Requirement: MyKi watches often require an active SIM card to process reset commands sent from the app or via SMS.

Battery Level: Ensure the watch has at least 30% battery before starting. If it dies during a hard reset, it can permanently damage the software.

QR Code Not Appearing: If the watch is reset but won't show the registration QR code, check that the SIM card has active mobile data and the PIN code is disabled.