How to Reset Epson L3250 Using Resetter Adjustment Program When your Epson L3250 EcoTank printer suddenly stops and displays a "Service Required" error message—often accompanied by the red ink and paper lights blinking alternately—it typically means the internal waste ink pad counter has reached its limit. Instead of sending it to a service center, you can often fix this issue at home using the Epson Adjustment Program (also known as a "resetter"). Prerequisites for Resetting Before starting the process, ensure you have the following:
A Windows PC: The adjustment program is specifically designed for Windows environments.
USB Cable Connection: The reset process cannot be performed over Wi-Fi; you must connect the printer directly to your computer via a USB cable.
Disabled Antivirus: Many antivirus programs flag these leaked tools as potential threats. It is often recommended to temporarily disable your antivirus or Windows Defender before extracting and running the tool. Step-by-Step Guide to Resetting the Epson L3250
Follow these exact steps to clear the "Service Required" error:
Open the Software: Right-click the AdjProg.exe (or similar) file and select Run as Administrator.
Select Your Model: Click the Select button. In the "Model Name" dropdown, choose L3250. Make sure the Port is set to "Auto Selection" or choose the specific USB port where your printer is connected. Click OK.
Enter Maintenance Mode: Click the Particular Adjustment Mode button on the right side of the window. how to reset epson l3250 using resetter adjustment program
Find the Counter: From the list of maintenance options, select Waste Ink Pad Counter and click OK [1.7]. Check Current Status:
Check the boxes for Main Pad Counter, Platen Pad Counter, and Ink System Pad Counter (if available).
Click the Check button. The software will show the current percentage of each counter. If it is 100%, a reset is required. Initialize the Reset: Re-check the boxes for the counters. Click the Initialize button. A pop-up will appear asking for confirmation; click OK.
Finalize: The software will prompt you to turn off your printer. Power down the device using the physical button, then click OK on the computer screen.
Restart: Turn the printer back on. The blinking red lights should now be gone, and the status should return to "Ready". Why Does This Error Happen?
Epson printers are equipped with "waste ink pads" that collect excess ink during printhead cleanings and initial setups. To prevent ink from overflowing and damaging the printer's internal components, a digital counter stops the machine once it estimates the pads are full. YouTubehttps://www.youtube.com How to Reset Epson L3250 Using Resetter Adjustment Program
To reset your Epson L3250 using an adjustment program, you must follow a series of steps to clear the "Service Required" error caused by a full waste ink pad counter. Step-by-Step Reset Instructions Deactivate Protection : Temporarily disable all antivirus software and Windows Defender Real-time Protection How to Reset Epson L3250 Using Resetter Adjustment
on your PC to prevent the resetter files from being blocked or deleted. Extract the Resetter
: Download and extract the adjustment program files using a tool like Run as Administrator : Right-click the Adjprog.exe (or "Epson Resetter PH") file and select "Run as administrator" Select Your Model : Click the button, choose from the model list, and ensure the port is set to Auto Selection Enter Adjustment Mode : Click on Particular Adjustment Mode Waste ink pad counter under the maintenance section. Initialize the Counter Check the boxes for Main pad counter Platen pad counter Ink system pad counter
button to see the current status (it will likely show 100%). Select the boxes again and click Initialize , then click to confirm. Complete the Cycle
: Turn off your printer when prompted. Wait a few seconds, turn it back on, and click in the software. Important Maintenance Note
Resetting the software counter does not physically clean the ink pads. To prevent physical ink overflow that could damage your printer's internal components, you should eventually wash or replace the physical ink pads manually inspect or replace the physical waste ink pads in your Epson L3250? HOW TO RESET EPSON L3250 | SERVICE REQUIRED
⚠️ Important Warning: Using a resetter program is safe for the printer but bypasses the physical waste ink pad counter. If the pad is already saturated, resetting without cleaning/replacing it may cause ink leakage inside your printer. Physically clean or replace the pad before resetting.
Physically clean or replace the waste ink pad. ⚠️ Important Warning : Using a resetter program
Download the official Epson Adjustment Program (not a random crack) — usually only available to authorized service centers. Many online copies contain malware, so be very careful.
Install & run the program (Windows only typically).
Select your printer model (L3250).
Go to “Waste ink pad counter” or “Initial ink charge” section.
Check the counters — usually there are two:
Tick both boxes and click “Check” then “Initialization” to reset.
Turn printer off/on.
If you still want to proceed at your own risk, here’s the general process: