How To Update Vgate Maxiscan Vs890 -

To update your Vgate MaxiScan VS890 , you must download the specific update tool and firmware from the official Vgate support portal

. The process requires a Windows PC and the USB cable included with your device. Alibaba.com Step-by-Step Update Guide Download the Update Software Vgate Download Center and navigate to the support or "Technical Support" section. Locate and download the VS890 Firmware Updater tool and the latest firmware file. If prompted for drivers, download the appropriate VS890 4G drivers

for your operating system (Windows XP through Windows 10 are supported). Prepare the Hardware

Ensure your scanner is charged or connected to a stable power source. Connect the Vgate VS890 to your computer using the standard Open your PC's Device Manager

to confirm the scanner is recognized under "Ports (COM & LPT)". Install and Run the Tool Unzip the downloaded firmware and updater files. Run the installation file as an Administrator how to update vgate maxiscan vs890

Launch the update application. The software should automatically detect your connected VS890 device and display the current firmware version. Execute the Update

Select the option to "Check for Updates" or manually browse for the firmware file you downloaded. to begin the transfer. Do not disconnect

the device during this process, as it can corrupt the firmware.

Once the tool confirms "Update Successful," safely eject the device from your computer. Power cycle (restart) the VS890. To update your Vgate MaxiScan VS890 , you

Go to the device settings to verify that the version number matches the latest release. Alibaba.com firmware version

number currently required for your vehicle's make and model? VGATE VS890 Update - OBD2 Scanner Multi-Language Support

Title: How to Update the Vgate vS890: A Step-by-Step Guide to Unlocking New Features Meta Description: Is your Vgate vS890 scanner acting up with newer cars? Learn how to safely update the firmware and software using the Vgate app to fix bugs and add new vehicle coverage.

If you own a Vgate vS890, you know it’s one of the most reliable budget OBD2 scanners on the market. It reads ABS, SRS, transmission, and engine codes on over 50 car brands. Title: How to Update the Vgate vS890: A

However, car manufacturers change ECU protocols constantly. If you buy a 2025 vehicle or notice your scanner is showing "Link Error," it is time to update your device.

Warning: Do not interrupt power during the update. A failed update can brick your scanner.

Here is the exact process to update your Vgate MaxiScan vS890.

If there’s no official firmware update available

Ensure you have the latest PC software for the VS890 (diagnostic software, PC viewers) from the manufacturer.
Check community forums for confirmed firmware releases for your exact model/revision, but be cautious—third-party firmware carries risk.

Phase 2: Prepare the VS890

Turn off the VS890 (do not connect to the car’s DLC yet).
Connect the device to your PC using the USB cable.
- Note: The device should power on automatically via USB.
Wait for Windows to install the driver (usually CH340 or USB Serial). If it fails, download the CH340 driver from the Vgate download page.

What you’ll need

Windows PC (most VS890 update tools are Windows-only).
USB A-to-mini-B cable (the one that came with the scanner).
Fully charged vehicle battery or engine running while updating.
Internet connection to download drivers/firmware/software.
The VS890 device.

Step 3: Connect the Scanner to your PC

Do not plug the vS890 into the car yet.
Connect the USB-C end into the side of the vS890.
Connect the USB-A end into your laptop.
Power the scanner ON by pressing the "OK" button on the device.
- You should see the screen backlight turn on.
- Your PC should make a "USB connected" sound.

Critical Warning:

Do not disconnect the USB cable or power off your PC while the update is in progress. Interrupting a firmware update will turn your VS890 into an expensive paperweight.

Step 3: Launch the Updater in “Recovery Mode”

The VS890 enters a special mode only when powered off and then connected.

Run the VS890 Updater.exe as Administrator (right-click > Run as administrator).
In the updater window, select the firmware .bin file you downloaded.
Now connect the USB cable to your PC.
Within 5 seconds, the VS890 screen will turn on showing “Updating…” or “USB Mode”. If you see normal menus, restart the process (the PC didn’t detect the device in time).