Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 «SECURE»

The HPE Smart Array S100i SR Gen10 is an entry-level, driver-based software RAID solution integrated into HPE ProLiant Gen10 servers.

While it was originally designed for Windows Server 2016 and 2019, HPE has released a dedicated driver specifically to support Windows Server 2022. 🛠️ Key Driver Features

Operating System Support: Native support for Windows Server 2022 (Standard, Datacenter, and Essentials).

RAID Level Capabilities: Supports RAID 0, 1, 5, and 10 for SATA drives.

Connectivity: Manages up to 14 SATA lanes connected to embedded system board ports.

Management Integration: Fully compatible with the HPE Smart Storage Administrator (SSA) and iLO 5 for remote monitoring and configuration. 🚀 Technical Performance & Limits

HPE Smart Array P408i‑a SR Gen10 12G SAS Modular Controller

The HPE Smart Array S100i SR Gen10 is a software-based RAID solution that requires specific drivers to function correctly under Windows Server 2022. While it provides essential data protection features like rebuilding arrays after drive failure, its software-only nature means RAID processing relies on the system's CPU, which can lead to performance variations depending on your hardware configuration. Driver Compatibility and Downloads

For Windows Server 2022, you should use the latest qualified drivers to ensure stability and performance.

HPE Smart Array S100i SR Gen10 SW RAID Driver: Version 1010.14.0.0(C) is the official release supporting Windows Server 2022.

Alternative Driver Package: For broader compatibility, the HPE Smart Array Gen10, Gen10Plus and Gen11 Controller Driver also supports Windows Server 2022/2025 and is recommended for use alongside specific controller firmware (version 8.00). Installation and Setup

Because the S100i driver is not included in the standard Windows installation media, the OS will not recognize your RAID logical volumes by default during setup.

Assisted Installation: Use HPE Intelligent Provisioning during setup; it automatically injects the necessary drivers, requiring no manual intervention.

Manual Injection: If installing from standard media, you must: Extract the driver files to a FAT32-formatted USB drive.

During the "Where do you want to install Windows?" step, click Load Driver and point to the folder on your USB drive. hpe smart array s100i sr gen10 driver windows server 2022

BIOS Configuration: Ensure the "Embedded SATA Configuration" in the UEFI System Utilities (F9) is set to Smart Array SW RAID Support. Note that this feature is not supported in Legacy BIOS mode. Performance and Management

Management Tools: Use the HPE Smart Storage Administrator (SSA) GUI or CLI to configure and monitor your arrays. Since the S100i is a "RAID-only" controller, individual physical drives are masked from the OS and only logical volumes are exposed.

Performance Note: Some users have reported performance drops in RAID-5 configurations on specific Gen10 Plus models; ensuring you have the latest firmware and driver combination is critical for optimal throughput.

HPE Smart Array S100i SR Gen10 driver is fully supported on Windows Server 2022

. Since this is a software-based RAID solution, the driver is not included in standard Windows installation media; you must manually provide it for the installer to recognize your logical volumes. Hewlett Packard Enterprise Essential Driver Information

To ensure stability and performance, use the dedicated driver version released specifically for the 2022 OS: 1010.14.0.0(C) Release Date: September 28, 2022 Download Source: HPE Support Center - S100i Driver for Windows Server 2022 Installation Best Practices Preparation: Download the driver package and extract the contents to a before starting your OS installation.

During the "Where do you want to install Windows?" step, click Load Driver and browse to the extracted folder on your USB. Automation Option: HPE Intelligent Provisioning

to automate the driver injection process during the OS install. Requirement Check: requires UEFI Boot Mode

; it is not supported if the server is configured for Legacy BIOS. Hewlett Packard Enterprise Quick Comparison: vs. SR100i

Verify your server model to ensure you are using the correct software RAID driver: S100i SR Gen10

Designed for standard ProLiant Gen10 servers (e.g., DL360/DL380 Gen10). SR100i Gen10 Plus Specifically for Gen10 Plus platforms. If you have a "Plus" model, use Driver Version 1010.124.100.1005 Hewlett Packard Enterprise UEFI configuration steps

to enable Software RAID mode before starting your installation?

To install Windows Server 2022 on an HPE ProLiant Gen10 server using the Smart Array S100i SR Gen10 controller, you must manually provide the driver during installation because it is not included in the standard Microsoft media. 1. Download and Prepare the Driver

The S100i is a software-based RAID controller that requires specific drivers to "see" your logical drives during Windows setup. The HPE Smart Array S100i SR Gen10 is

Download: Obtain the latest HPE Smart Array S100i SR Gen10 SW RAID Driver (e.g., version 1010.14.0.0 or later).

Extract: Run the .exe on a separate PC and choose the Extract option.

Transfer: Copy the extracted files (including the .inf, .sys, and .cat files) onto a USB flash drive. 2. Configure RAID in UEFI

Before starting the OS installation, you must enable the controller and create an array.

Enable Controller: Press F9 during POST to enter System Utilities. Navigate to System Configuration > BIOS/Platform Configuration > Storage Options > SATA Controller Options > Embedded SATA Configuration and set it to Smart Array SW RAID Support.

Create Array: Press F10 for Intelligent Provisioning or use the UEFI menu under Embedded Storage to create your RAID 0, 1, 5, or 10 volume. 3. Install Windows Server 2022 Boot from your Windows Server 2022 installation media.

Proceed through the setup until the "Where do you want to install Windows?" screen appears. If no drives are listed, this is normal. Click Load Driver and insert your USB flash drive.

Click Browse and navigate to the folder on your USB where you extracted the driver files.

Select the identified driver and click Next. Your RAID volume should now appear in the list. Select the volume and continue the installation. Alternative: Assisted Installation

You can skip manual driver injection by using Intelligent Provisioning. Press F10 during boot and select Express OS Install. This method automatically injects all required HPE drivers, including the S100i storage driver, during the setup process.

Installing HPE Smart Array S100i SR Gen10 Driver on Windows Server 2022

HPE Smart Array S100i SR Gen10 is a popular RAID controller used in HPE ProLiant Gen10 servers. If you're running Windows Server 2022 on a ProLiant Gen10 server with an S100i SR Gen10 controller, you'll need to install the proper driver to ensure optimal performance and functionality. In this article, we'll guide you through the process of installing the HPE Smart Array S100i SR Gen10 driver on Windows Server 2022.

Why Install the Driver?

The HPE Smart Array S100i SR Gen10 driver is essential for Windows Server 2022 to recognize and interact with the RAID controller. Without the driver, you may experience: Inability to detect or configure RAID sets Limited

Inability to detect or configure RAID sets
Limited performance and throughput
Incompatibility issues with certain Windows Server 2022 features

Prerequisites

Before installing the driver, ensure you have:

A HPE ProLiant Gen10 server with an S100i SR Gen10 controller
Windows Server 2022 installed on the server
Access to the internet for downloading the driver

Downloading the Driver

You can download the HPE Smart Array S100i SR Gen10 driver from the HPE website:

Go to the HPE Support website
Click on "ProLiant" and select "Gen10" as the server model
Choose "Smart Array" as the controller type and select "S100i SR Gen10"
Select "Windows Server 2022" as the operating system
Download the driver package (e.g., hpe-s100i-sr-gen10-driver-windows-2022.zip)

Installing the Driver

To install the driver, follow these steps:

Extract the driver package: Unzip the downloaded package to a folder on your server (e.g., C:\drivers\s100i-sr-gen10)
Open Device Manager: Press the Windows key + X and select Device Manager
Locate the S100i SR Gen10 controller: In Device Manager, expand "Storage controllers" and look for "HPE Smart Array S100i SR Gen10 Controller" (it may be listed as "Unknown device" if the driver is not installed)
Update the driver: Right-click on the S100i SR Gen10 controller and select "Update driver"
Browse for the driver: Click "Browse my computer for driver software" and navigate to the extracted driver folder (e.g., C:\drivers\s100i-sr-gen10)
Install the driver: Select the driver package (e.g., hpe-s100i-sr-gen10-driver.inf) and click "Install"
Restart the server: Once the driver is installed, restart your server to ensure the changes take effect

Verifying the Driver Installation

After restarting your server, verify that the driver is installed correctly:

Open Device Manager: Press the Windows key + X and select Device Manager
Locate the S100i SR Gen10 controller: In Device Manager, expand "Storage controllers" and look for "HPE Smart Array S100i SR Gen10 Controller"
Check the driver version: Right-click on the S100i SR Gen10 controller and select "Properties". In the Properties window, click on the "Driver" tab to verify the driver version

Conclusion

Installing the HPE Smart Array S100i SR Gen10 driver on Windows Server 2022 is a straightforward process. By following these steps, you can ensure that your RAID controller is properly recognized and configured, providing optimal performance and functionality for your ProLiant Gen10 server. If you encounter any issues during the installation process, consult the HPE documentation or contact HPE support for assistance.

White Paper: Deployment and Configuration of HPE Smart Array S100i sr Gen10 on Windows Server 2022

Version: 1.0 Date: October 26, 2023 Author: Technical Content Team Focus: Driver Architecture, Installation Procedures, and Best Practices

Method A: Device Manager

Open Device Manager.
Expand “Storage Controllers.” Find “Standard SATA AHCI Controller” or “Unknown device.”
Right-click > Update driver > Browse my computer for drivers.
Point to the extracted driver folder.
Click Next and allow installation. Reboot.

📦 HPE Service Pack for ProLiant (SPP)

Always keep your SPP updated. The latest SPP includes the S100i driver for Windows Server 2022 and simplifies maintenance.

The Core Problem: No Drives Found During Installation

You boot from your Windows Server 2022 ISO (via iLO virtual media, USB, or DVD). The setup loads, but when you reach the "Where do you want to install Windows?" screen, the drive list is completely empty. You see no physical disks or logical RAID volumes.

This is not a hardware failure. It is a missing driver symptom. Windows Server 2022 has no native storport miniport driver for the S100i's PCI device ID (typically PCI\VEN_8086&DEV_A382 or similar).

The solution: Provide the driver during the OS installation or inject it afterward.