Hsp0276: S71200 Cpu V4 3 ((full)) Download

The HSP0276 is the specific Hardware Support Package (HSP) required to integrate S7-1200 CPU Firmware V4.3 into the hardware catalog of Siemens TIA Portal V15.1. Where to Download HSP0276

You can obtain this support package directly from the Siemens Industry Online Support (SIOS) site. Download ID: Entry ID 72341852.

File Name: It is typically bundled within the TIA_Portal_V15_HSP.zip or the export-restricted TIA_Portal_V15_HSP_restricted.zip file.

Compatibility: HSP0276 is specifically for TIA Portal V15.1; firmware V4.3 is natively supported in V16 and newer. Installation Steps

Extract: Download and unzip the HSP file from the SIOS website. Hsp0276 S71200 Cpu V4 3 Download

TIA Portal Menu: Open TIA Portal and go to Options > Support packages.

Add File: Click Add from file system and browse to the extracted *.isp file.

Install: Select the package (where "Installed" is marked "No") and click Install.

Restart: Close all TIA Portal windows to allow the installation to finish, then restart the software to see the new CPU version in your hardware catalog. Firmware vs. HSP The HSP0276 is the specific Hardware Support Package

HSP0276: Updates the software catalog so you can select "V4.3" in your project configuration.

CPU Firmware V4.3: Updates the physical PLC hardware. This can be downloaded from SIOS Entry 109763919 and loaded via an SD card, web server, or TIA Portal online diagnostics.

Here’s a solid, structured content piece for downloading HSP 0276 (SINAMICS Drive integration) into a S7-1200 CPU V4.3 using TIA Portal.

This is written as a technical guide / knowledge base article — suitable for an internal wiki, support document, or training manual. Title: How to Download HSP 0276 for S7-1200 CPU FW V4

Title:

How to Download HSP 0276 for S7-1200 CPU FW V4.3 – Complete Step-by-Step Guide

Q3: Can I install HSP0276 on TIA Portal V13 or V14?

A: No. Firmware V4.3 is not compatible with those versions. You must upgrade your TIA Portal to at least V15.1.

Step 3 – Verify installation

4. Verification After Installation

After HSP0276 installation:

Verification checklist: | Check | Status (Yes/No) | |-------|----------------| | TIA Portal detects CPU with FW V4.3 | | | No “incompatible device” error when adding CPU | | | Able to compile/download to actual S7-1200 V4.3 | |

Download and Installation Guide

The HSP is a small package that integrates directly into TIA Portal.

  1. Check Compatibility: Ensure your TIA Portal version supports V4.3 CPUs. Typically, you should be on TIA Portal V15.1 or newer (V16/V17/V18 are recommended for the best experience).
  2. Download:
    • Method A (Recommended): Open TIA Portal, go to the "Online & Diagnostics" tab, and select "Download from Internet". Search for "S7-1200" or filter by HSP ID 0276.
    • Method B (Manual): You can download the .hsp file directly from the Siemens Support Industry Mall or the automation component page. (Note: A Siemens login is usually required for the direct portal access).
  3. Install: Double-click the downloaded .hsp file. It will launch a dialog box asking which TIA Portal version to install it into. Select your version and let it unpack.
  4. Update Catalog: Restart TIA Portal. Go to the Hardware Catalog, click the "Update Catalog" button (or press F5), and the CPU V4.3 should now appear under the S7-1200 folder.

Prerequisites

Before initiating the download, ensure your system meets the following requirements:

  1. TIA Portal Version: HSPs are version-specific. The S7-1200 V4.3 support is typically required for TIA Portal V15, V16, and V17. (Note: TIA Portal V18 and newer usually include this support natively).
  2. Siemens Support Account: A Siemens Digital Industries support account (formerly Siemens Industry Online Support) is required to access the official download servers.
  3. Administrator Rights: You must have administrative privileges on the PC to install the HSP.