I understand you’re looking for a paper or guide on running OpenWrt on the Huawei EC6108V9 set-top box.
However, this device is not a standard router but an Android-based IPTV receiver. Because of its limited hardware (Hi3798M CPU, 1 GB RAM, 4–8 GB eMMC, no native Wi-Fi chipset in most variants), running OpenWrt is not straightforward or officially supported.
Below is a structured outline for a technical report you could write on the topic, including what works, what doesn’t, and practical alternatives.
Before you flash, you must identify your revision. The EC6108V9 comes in many flavors. OpenWrt works best on the following:
| Model | CPU | NAND | RAM | Compatibility | | :--- | :--- | :--- | :--- | :--- | | EC6108V9 (China Telecom) | Hi3798M v100 | 4GB eMMC | 1GB | Excellent | | EC6108V9C (Hi3798M) | Hi3798M v100 | 4GB NAND | 1GB | Good (Check NAND type) | | EC6108V9U | Hi3798M | 8GB eMMC | 1.5GB | Perfect | | EC6108V9A (Russia/CIS) | Hi3798MV100 | 4GB eMMC | 1GB | Excellent |
Warning: The V9E (with 512MB RAM) is not recommended for OpenWrt 21.02+ as the kernel struggles with memory fragmentation.
To check your version, connect a serial UART adapter (115200 baud) or look at the sticker under the box.
The Huawei EC6108V9 is an Android-based IPTV set-top box (STB) widely deployed by telecom operators (e.g., China Telecom, China Unicom). Its hardware—specifically the HiSilicon Hi3798M chipset—makes it a potential, though challenging, candidate for running OpenWrt. While not natively supported in mainline OpenWrt, community projects have produced unofficial builds. However, the device is not recommended for new OpenWrt deployments due to driver limitations, complex flashing procedures, and better alternatives.
This box is essentially a router hidden inside a TV box chassis.
After reboot, the new bootloader will automatically look for update.zip on the USB drive.
You will see text scrolling on the HDMI screen:
-- Install /sdcard ...
Writing to eMMC...
Erasing NAND...
Wait for the verification process. The new installers use sha256sum to prevent corrupt flashes.
Once finished (approx. 2 minutes), the device will reboot. You will see the OpenWrt boot log. When the HDMI signal stops (black screen), the installation is successful.
I understand you’re looking for a paper or guide on running OpenWrt on the Huawei EC6108V9 set-top box.
However, this device is not a standard router but an Android-based IPTV receiver. Because of its limited hardware (Hi3798M CPU, 1 GB RAM, 4–8 GB eMMC, no native Wi-Fi chipset in most variants), running OpenWrt is not straightforward or officially supported.
Below is a structured outline for a technical report you could write on the topic, including what works, what doesn’t, and practical alternatives.
Before you flash, you must identify your revision. The EC6108V9 comes in many flavors. OpenWrt works best on the following: huawei ec6108v9 openwrt new
| Model | CPU | NAND | RAM | Compatibility | | :--- | :--- | :--- | :--- | :--- | | EC6108V9 (China Telecom) | Hi3798M v100 | 4GB eMMC | 1GB | Excellent | | EC6108V9C (Hi3798M) | Hi3798M v100 | 4GB NAND | 1GB | Good (Check NAND type) | | EC6108V9U | Hi3798M | 8GB eMMC | 1.5GB | Perfect | | EC6108V9A (Russia/CIS) | Hi3798MV100 | 4GB eMMC | 1GB | Excellent |
Warning: The V9E (with 512MB RAM) is not recommended for OpenWrt 21.02+ as the kernel struggles with memory fragmentation.
To check your version, connect a serial UART adapter (115200 baud) or look at the sticker under the box. I understand you’re looking for a paper or
The Huawei EC6108V9 is an Android-based IPTV set-top box (STB) widely deployed by telecom operators (e.g., China Telecom, China Unicom). Its hardware—specifically the HiSilicon Hi3798M chipset—makes it a potential, though challenging, candidate for running OpenWrt. While not natively supported in mainline OpenWrt, community projects have produced unofficial builds. However, the device is not recommended for new OpenWrt deployments due to driver limitations, complex flashing procedures, and better alternatives.
This box is essentially a router hidden inside a TV box chassis.
After reboot, the new bootloader will automatically look for update.zip on the USB drive.
You will see text scrolling on the HDMI screen: Part 2: Hardware Identification – Do you have the V9
-- Install /sdcard ...
Writing to eMMC...
Erasing NAND...
Wait for the verification process. The new installers use sha256sum to prevent corrupt flashes.
Once finished (approx. 2 minutes), the device will reboot. You will see the OpenWrt boot log. When the HDMI signal stops (black screen), the installation is successful.