Hyt Tc-780 Programming Software Download ~repack~ May 2026

HYT TC-780 is a professional analog radio from Hytera. To program it, you need the Customer Programming Software (CPS)

specifically designed for the TC-780 series, along with a compatible programming cable. Atlantic Radio Communications Corp. Official & Professional Sources

For security and compatibility, it is best to obtain software through authorized channels. Hytera Download Center : The most reliable official source is the Hytera Download Center

. End users typically need to contact their local dealer or provider to gain access to specific software downloads. Paid Downloads : Professional radio service sites like 49er Communications ($75.00) and Public Safety LMR offer downloadable versions such as or version Third-Party Repositories : Sites like Software Informer list versions 2.4 and 6.4 for the

variant, though these are community-hosted and should be scanned for viruses. Hardware Requirements

You cannot program the radio via software alone; you need the correct physical interface: TC-780M Programming Software Download 28 Aug 2025 —

The programming software for the Hytera HYT TC-780 , primarily known as

, is a dedicated configuration utility used to manage the radio's 256-channel capacity and advanced signaling features. 49er Communications Key Programming Features

The software allows technicians to customize several critical operational parameters: Channel Management : Configure up to 256 channels

. Channels can be organized into 32 flexible groups for effective team management. Signaling & ID : Setup for 2-Tone, DTMF, HDC1200, and HDC2400 encoding and decoding. It also enables ANI (Automatic Number Identification) and ATIS encoding. Safety Configurations : Program safety-critical features such as Lone Worker Safety Check Advanced Controls : Enable/disable features like Kill/Stun/Revive for stolen radios, mode for quiet transmissions, and a built-in for secure conversations. User Customization : Assign shortcut functions to six programmable buttons and set power levels (High 5W/Low 1W). Scan Lists : Create up to 32 scan lists

, each supporting a maximum of 32 channels, with options for dual-priority scanning. Murphy Comhire Software Download & Setup

The official programming software for the HYT (Hytera) TC-780 radio is the PCS780 Customer Programming Software (CPS) Hyt Tc-780 Programming Software Download

. This software allows technicians to configure channel lists, signaling options like CTCSS/DCS, and operational parameters such as power levels and VOX. 49er Communications Where to Download or Purchase

Hytera typically distributes programming software through its authorized dealer network rather than as a direct public download for end-users. Official Dealer Support

: End-users are advised to contact their original equipment provider or a local dealer to obtain the correct software version for their radio's firmware. Authorized Retailers : You can purchase downloadable versions of the software from reputable retailers like 49er Communications Atlantic Radio Corp

, which often provide the software via a download link or USB. Hytera Download Center : Official manuals and brochures can be found at the Hytera Download Center

, though software access may require partner login credentials. 49er Communications Technical Requirements TC-780M Programming Software Download

The HYT TC-780, a staple in professional analog communication, relies on specialized Customer Programming Software (CPS) to manage its 256 channels and advanced signaling features. Whether you are a technician setting up a new fleet or a radio enthusiast, finding and using the correct software is the key to unlocking this device's full potential. The Software: PCS780 and TC-780M

To configure the TC-780, you typically need the PCS780 programming software. This tool allows you to:

Manage Channels: Assign frequencies and sub-audio tones (CTCSS/CDCSS).

Configure Signaling: Set up 2-tone, 5-tone, and HDC2400/MDC1200 signaling for selective calling.

Customize Features: Enable the "Whisper" function, Lone Worker alerts, and programmable function keys.

A specialized version, TC-780M Programming Software (often seen in versions 2.4 or 6.4), is also used for specific sub-models. How to Download and Access HYT TC-780 is a professional analog radio from Hytera

Historically, Hytera software was distributed via authorized dealers. Today, options for obtaining it include: Hytera PCS780 Programming Software for TC-780

Programming Software, PCS780 - for Hytera TC-780 Series Radios * Programming Software PCS780. * Hytera Radio TC-780 Series. 49er Communications

The official programming software for the HYT TC-780 is the Hytera PCS780 Customer Programming Software (CPS). This software allows users to configure essential radio functions, such as channel management, power settings, and signaling. Official & Authorized Sources

While Hytera provides a Download Center for manuals and brochures, professional programming software is typically restricted to authorized partners and dealers. End-users usually need to purchase a license through retailers.

49er Communications: Offers the Hytera PCS780 Programming Software as a digital download.

Atlantic Radio: Provides the Hytera Customer Programming Software (CPS) via an email download link or a physical USB drive.

Public Safety LMR: Stocks the HYT TC-780 Programming Software v5.01.01 on CD. Essential Hardware Requirements

To use the software, you must have a compatible programming cable to connect the radio to your PC. Programming Cable: The PC25 USB Programming Cable Go to product viewer dialog for this item. is the standard accessory for the TC-780.

USB Drivers: Most cables require the installation of Prolific or FTDI drivers (often version 3.2.0.0 for older Prolific chips) to be recognized by Windows. Key Software Capabilities Once installed, the PCS780 software enables the following:

Channel Management: Edit RX/TX frequencies and assign names to up to 256 channels.

Signaling Configuration: Set CTCSS/DCS tones, squelch levels, and 2-Tone/5-Tone signaling. Step 4: First Connection – The “Handshake”

Feature Assignment: Program side keys for functions like VOX, Scrambler, or Emergency alerts.

Fleet Management: Clone settings across multiple units to ensure fleet consistency. Programming Process

Installation: Install the USB drivers followed by the PCS780 software.

Connection: Power on the radio and connect it to the PC using the PC25 cable.

Read Data: Select "Programming" > "Frequency Reading" to pull existing data from the radio.

Edit & Write: Modify settings as needed and select "Write Frequency" to save changes back to the device. Hytera Customer Programming Software (CPS) - Atlantic Radio

Step 4: First Connection – The “Handshake”

Turn off your TC-780.
Connect the programming cable to the radio’s side port (under the rubber cover).
Plug the USB end into your PC.
Turn the radio on while holding the PTT button + Top side button 1 (this puts it into programming mode).
Launch the CPS. Go to Program > Read from Radio.

If you see the frequency table appear – congratulations. If not, check Device Manager for a yellow bang on the COM port.

How to Program the HYT TC-780

Install the Software: Download the software and run the installer (or extract the ZIP file). Install the USB drivers if necessary.
Connect the Radio: Plug the programming cable into the accessory port on the side of the TC-780. Ensure the radio is turned ON.
Launch the Software: Open the TC-780 programming application.
Set the COM Port: Go to the "Setting" or "Setup" menu. Select the COM port that your cable is using (e.g., COM3 or COM4). You can find this number in Windows Device Manager under "Ports (COM & LPT)."
Read the Radio: Click the "Read" button (usually represented by a radio icon with an arrow pointing to a computer). This downloads the current configuration from the radio.
Edit Frequencies:
- Navigate to the "Channel Information" tab.
- Enter your desired RX (Receive) and TX (Transmit) frequencies.
- Set your CTCSS (PL) or DCS (DPL) tones to match your local repeaters or simplex channels.
Write to Radio: Once you have made your changes, click the "Write" button (computer arrow pointing to radio) to upload the new codeplug.

Hardware Needed

You cannot program the radio with a standard mini-USB cable. You will need a USB Programming Cable specifically designed for HYT/Hytera radios (usually identified as compatible with the TC-500, TC-600, TC-700, or TC-780 series).

The driver for this cable is crucial. Most programming cables use a Prolific (PL2303) or Silicon Labs (CP210x) chipset.

If Windows does not recognize the cable, you will need to download the specific USB-to-Serial driver for your cable's chipset.

System Requirements for a Stable Programming Session

The TC-780 software was last updated in the early 2010s. It performs best on legacy Windows environments.

Important Note on Windows 10/11: The original HYT software has known issues with modern USB power management and driver signing. We recommend using a Windows 7 virtual machine (VMware or VirtualBox) for trouble-free operation.

Step 2: Install the USB-to-Serial Driver Before Plugging in the Radio

Unzip the downloaded CPS package. Look for a subfolder named USB_Driver or Prolific_Driver.
Run PL2303_Prolific_DriverInstaller_v1.14.0.exe as Administrator.
Do not connect the programming cable yet.