I Asmaco Spray Paint Msds Pdf 213 — Extended & Instant

The safety data sheet (SDS) for Asmaco Spray Paint identifies it as a highly flammable, acrylic-based aerosol used for interior and exterior applications. You can view or download the relevant documentation through the following sources: Safety & Technical Data Sheets Safety Data Sheet (SDS/MSDS):

Detailed safety information, including hazard identification (flammability, inhalation risks) and first aid measures, is available on Product Data Sheet (PDS):

Technical specifications such as drying time (surface dry in <30 mins), coverage, and storage life (3 years) can be found on Manufacturer Information: Asmaco products are manufactured by Anchor Allied Factory Ltd Key Safety Information

Extremely flammable aerosol (H222) and contains gas under pressure (H280). Precautions: i asmaco spray paint msds pdf 213

Use only in well-ventilated areas, wear protective gloves/eye protection, and keep away from heat, sparks, or open flames. First Aid: Inhalation: Move to fresh air immediately. Eye Contact: Rinse with water for at least 15 minutes. Skin Contact: Wash with soap and water. Anchor Allied USA Inc specific color or a different product in the Asmaco line? ASMACO Spray Paint Product Data Sheet | PDF - Scribd

I cannot directly generate or provide the actual Material Safety Data Sheet (MSDS) PDF file for "Asmaco Spray Paint" (reference 213), as that document is copyrighted by the manufacturer (Asmaco/Asian Paints) and must be obtained from them directly.

However, I can help you in two ways:

  1. A template of the typical sections you would find in an MSDS for a general spray paint (aerosol) so you know what to expect.
  2. Instructions on how to locate the official PDF for product code 213.

Section 5: Firefighting Measures

  • Flash Point: Typically below -20°C (Closed cup) – Extremely volatile.
  • Extinguishing Media: Dry chemical, CO2, foam. DO NOT use water jet (spreads solvent fire).
  • Explosion Hazard: Aerosol cans may burst at temperatures above 50°C (122°F).

Key Sections of the Asmaco 213 MSDS/SDS PDF

If you open the official PDF, here is the critical content you will find in each section:

1. Composition/Information on Ingredients This section lists the chemical makeup. For an Asmaco spray product, this usually includes:

  • Solvents: Such as Acetone, Toluene, or Hexane (these give it the strong smell and flammability).
  • Propellants: Such as Butane or Propane (used to push the paint/adhesive out of the can).
  • Resins/Polymers: The actual adhesive or paint material left behind after the solvent evaporates.

2. First-Aid Measures

  • Inhalation: Move to fresh air immediately. If breathing is difficult, oxygen should be administered by trained personnel.
  • Skin Contact: Wash with soap and water. Remove contaminated clothing.
  • Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present.
  • Ingestion: Do NOT induce vomiting. Rinse mouth and seek medical attention.

3. Fire-Fighting Measures

  • Extinguishing Media: Dry chemical powder, CO2, or alcohol-resistant foam.
  • Specific Hazards: Pressurized container may explode when heated. Vapors are heavier than air and can travel to ignition sources.

4. Accidental Release Measures

  • Eliminate all ignition sources.
  • Ventilate the area.
  • Absorb spills with inert material (like sand or vermiculite) and dispose of according to local regulations.

5. Handling and Storage

  • Handling: Avoid contact with skin and eyes. Do not breathe spray mist. Use explosion-proof electrical equipment.
  • Storage: Store in a cool, dry, well-ventilated area away from heat and direct sunlight. Keep away from oxidizing agents.

Why You Need the MSDS PDF 213

The Material Safety Data Sheet (MSDS), now often called SDS (Safety Data Sheet) under GHS (Globally Harmonized System), is a legal document required by OSHA, REACH, and most international health agencies. For I Asmaco Spray Paint, the MSDS PDF 213 is non-negotiable for the following reasons:

  1. Legal Compliance: Workplaces must have an MSDS for every hazardous chemical.
  2. Worker Safety: It informs workers about inhalation risks (VOCs), skin irritation, and flammability.
  3. Emergency Response: Firefighters and medical personnel use the MSDS to treat chemical burns or inhalation injuries.
  4. Transportation: Shipping spray paints (aerosols are Class 2 dangerous goods) requires the MSDS.

Without the specific PDF 213 document, you are effectively blind to the exact solvent blend used in that batch.

Section 1: Identification

  • Product Identifier: Confirms "I Asmaco Spray Paint - Code 213".
  • Recommended Use: Coating, decoration, anti-corrosion protection.
  • Supplier Information: Manufacturer’s address (often UAE, China, or India depending on the license).