Building & Breaking Web Applications

I Download Fixed Driver Cutting Plotter Jinka 1351 !free!

How to Download and Install Fixed Drivers for the Jinka 1351 Cutting Plotter

If you are a sign maker or a DIY enthusiast, the Jinka 1351 is a workhorse. However, many users run into a common roadblock: connection issues caused by outdated or corrupt drivers. If your computer isn’t recognizing your plotter, or if it stops mid-cut, you likely need to download the fixed driver for the Jinka 1351.

This guide will walk you through finding the correct software, installing it properly, and getting your machine back to work. Why Do You Need a "Fixed" Driver?

The Jinka 1351 typically uses a USB-to-Serial CH340 or FTDI chip to communicate with your PC. Problems usually arise because:

Windows Updates: New Windows versions often override older drivers with "generic" versions that don’t work.

Driver Signature Enforcement: Windows 10 and 11 often block unsigned drivers.

Port Conflicts: The software is looking for COM1, but your USB is plugged into COM3.

A "fixed" driver is simply the stable, verified version of the USB-to-Serial driver that ensures a steady handshake between your cutting software (like AnyCut, CorelDraw, or Artcut) and the hardware. Step 1: Where to Download the Jinka 1351 Driver i download fixed driver cutting plotter jinka 1351

To get your Jinka 1351 running, you don't actually look for a "Jinka" brand file; you look for the USB Serial Driver.

Official CH340 Driver: Most Jinka models use the CH341SER chip. You can download the latest stable version from the official manufacturer (WCH) or your distributor's support page.

Legacy Drivers: If you are on an older system (Windows 7 or XP), you may need the specific PL2303 Prolific driver.

Note: Always download drivers from reputable sources to avoid malware. If your plotter came with a small blue or white CD, the files are there, but downloading the latest version online is usually better for Windows 10/11 compatibility. Step 2: Installation Guide (The "Fix") Before installing, unplug the USB cable from your computer.

Run as Administrator: Right-click the downloaded setup file and select "Run as Administrator."

Click Install: Follow the prompts. If it says "Driver is pre-installed," that’s a good sign.

Restart Your PC: This is a crucial step that many skip. Restarting clears the port registry. How to Download and Install Fixed Drivers for

Plug in the Plotter: Turn on your Jinka 1351 and plug in the USB cable. Step 3: Configuring the COM Port (Crucial)

Even with the driver installed, the Jinka won't cut if the ports don't match. Right-click the Start button and open Device Manager. Look for Ports (COM & LPT).

You should see USB-SERIAL CH340 (COMX). Note the number (e.g., COM3). Open your cutting software (Artcut, SignMaster, etc.).

In the Link/Output Settings, change the Port to match the one in Device Manager (e.g., COM3).

Set the Baud Rate to 9600 (this is the standard speed for Jinka 1351). Troubleshooting Common Jinka 1351 Issues 1. The "USB Device Not Recognized" Error

Try a different USB port, preferably one on the back of the PC (if using a desktop). Avoid using USB hubs, as they often don't provide enough voltage for the data transfer. 2. Plotter Stops Mid-Cut

This is often static electricity or a "buffer overflow." Ensure your plotter is grounded (the Jinka 1351 is a large metal machine and builds up static). Also, ensure you are using a high-quality, shielded USB cable. 3. Driver Fails to Install on Windows 11 Source 2: Sign Making Software Forums Forums like

You may need to temporarily disable "Driver Signature Enforcement." Go to Settings > Recovery > Advanced Startup, then navigate to Startup Settings and press F7 to disable the enforcement. Conclusion

Downloading the fixed driver for the Jinka 1351 is the first step toward flawless vinyl cutting. By ensuring you have the CH340 USB-to-Serial driver and matching your COM port settings, you can eliminate 90% of the technical headaches associated with this machine.

Source 2: Sign Making Software Forums

Forums like Signs101, CutterForum, or Reddit r/VinylCutters have sticky threads with direct download links to community-vetted, fixed drivers. Look for posts with titles like "Jinka 1351 Windows 11 working driver".

Step 3: The Installation Process (Forcing the Fixed Driver)

Assuming you have downloaded the Fixed_Jinka_Driver.zip or the CH340 installer, here is the manual override method:

For the CH340 (Serial) Version:

  1. Disconnect the plotter.
  2. Run the CH340_Setup.exe as Administrator.
  3. Select "Install" – Ignore the "Driver not tested" popup (Trust the source if you downloaded from a reputable tech forum like SignCut Community).
  4. Reboot your PC. Connect the plotter. It should now appear under "Ports (COM & LPT)."

For the HID (Broken Signature) Version:

  1. Download the fixed driver file. Extract the folder to C:\Jinka_Driver.
  2. Disable Driver Signature Enforcement temporarily:
    • Shift + Restart your PC > Troubleshoot > Advanced Options > Startup Settings > Restart > Press F7 (Disable driver signature enforcement).
  3. Go to Device Manager > Right-click the broken Jinka device > Update Driver > Browse my computer > Let me pick.
  4. Click "Have Disk" > Browse to C:\Jinka_Driver and select the .inf file.
  5. Ignore the "Windows can't verify the publisher" warning. Install anyway.
  6. Reboot normally.

Step 2: Uninstall the Old, Broken Driver

Do not install over the old one.

  1. Right-click Start > Device Manager.
  2. Expand Ports (COM & LPT).
  3. If you see "Jinka 1351" or "Prolific USB-to-Serial" with a yellow exclamation, right-click > Uninstall device.
  4. Check "Delete the driver software for this device".
  5. Also go to Universal Serial Bus controllers and uninstall any unknown USB device.

The #1 Mistake: Installing the Driver Wrong

Most users fail because they download the driver but do not configure the cutting software to use it. A "fixed driver" is useless if your software speaks a different language.

After installing the fixed driver, you must set up your cutting software (SignMaster, ArtCut, Flexi, VinylMaster):

  • Manufacturer: Generic HPGL
  • Model: HP 7475A or Roland DG (PX-E mode for Jinka)
  • Port: The COM port number (e.g., COM3) or USB001
  • Baud Rate: 9600 (Standard for Jinka 1351) or 38400 (Test both)
  • Data Bits: 8
  • Parity: None
  • Stop Bits: 1
  • Flow Control: Hardware (or Xon/Xoff depending on your firmware version)