Icom Ic-v80 Programming Software ((top)) Download

To program the Icom IC-V80 Go to product viewer dialog for this item.

handheld radio, you can use official Icom software, third-party solutions like RT Systems, or open-source tools like CHIRP. Each requires a compatible PC-to-radio cloning cable (typically a 2-pin connector). 1. Official Icom CS-V80 Software

The CS-V80 is the official cloning software designed specifically for the IC-V80 series.

Purpose: Allows you to set up and manage all 200 memory channels, scan edges, and menu settings from your computer.

Format: Historically sold as a CD-ROM or through authorized dealers like Ameradio or DX Engineering. Compatibility: Designed for Windows-based systems. 2. RT Systems WCS-V80 (Recommended for Ease of Use)

Many users prefer the RT Systems WCS-V80 software due to its more intuitive spreadsheet-style interface and built-in features. WCS-V80 Programming Software for Icom IC-V80 - RT Systems

Step-by-Step: Programming Your IC-V80 with Chirp (Free Method)

This is the most common workflow for the keyword search “Icom IC-v80 programming software download.”

Step 1: Gather Your Gear

• IC-V80 radio (charged battery).
• USB programming cable.
• Windows/Mac/Linux computer.

Step 2: Install Cable Drivers Plug in the cable without the radio attached. Wait for Windows to chime. Open Device Manager. Look for “Prolific USB-to-Serial Comm Port (COMx)”. If you see a yellow triangle, update the driver manually. Icom Ic-v80 Programming Software Download

Step 3: Connect Radio to Cable With the radio powered OFF, plug the two plugs into the mic/speaker jacks on the side of the IC-V80. The 3.5mm plug goes into the SP jack. The 2.5mm plug goes into the MIC jack.

Step 4: Enter Clone Mode Turn the radio ON while simultaneously holding the PTT and Monitor (Lamp) buttons. The screen will display “CLONE.” This tells the radio to listen for data from the PC.

Step 5: Download Chirp and Read the Radio Launch Chirp. Click Radio > Download from Radio. Set Vendor to Icom, Model to IC-V80, Port to your COM port (e.g., COM3). Click OK. A progress bar will appear.

Step 6: Edit Your Channels Chirp will show a spreadsheet. Right-click to insert rows.

• Location: Channel number (e.g., 01).
• Frequency: Enter receive frequency (e.g., 146.520 for simplex).
• Duplex: Set to “+” or “-” for repeaters (or “none” for simplex).
• Offset: Usually 0.600 MHz for 2m.
• Tone Mode: Set to “Tone” for CTCSS encode, “TSQL” for encode/decode, or “DTCS” for digital tones.
• Tone: Enter the CTCSS frequency (e.g., 100.0 Hz).
• Name: Enter a short tag (e.g., “LOCAL REP”).

Step 7: Upload to Radio Ensure the radio is still in CLONE mode. Click Radio > Upload to Radio. Wait for the “Complete” message. Turn the radio off, then on again. Your channels are now programmed.

2. Third-Party USB Cables (eBay/Amazon)

• Cost: $8–$15.
• Pros: Cheap and readily available. Search for “Icom IC-V80 programming cable USB.”
• Cons: Driver nightmares. Most counterfeit cables use a Prolific PL2303 or CH340 chip.

The Driver Fix for Cheap Cables:

• Windows 11/10: Prolific drivers have been disabled for fake chips. You must download an older driver (version 3.2.0.0 or 3.3.11.125) from a site like prolific.com/downloads.
• Virtual COM Port: After installing drivers, go to Device Manager > Ports (COM & LPT) to see what COM port number was assigned (e.g., COM4). You will need this number in Chirp or CS-V80.

Icom IC‑V80 Programming Software Download

RT Systems (Paid, but Superior for Batch Jobs)

While RT Systems software (rtsystemsinc.com) is not free, it is worth mentioning because many hams confuse it with the official Icom software. RT Systems offers a dedicated package for the IC-V80 that is even easier to use than CS-V80, featuring drag-and-drop channel editing and Excel integration. However, it costs roughly $50.

Where to Download the Official CS-V80

Warning: Do not download the “official” software from random file-sharing sites; they are often infected with malware. Icom does not distribute its software via third-party hosts. To program the Icom IC-V80 Go to product

The only legitimate source is the official Icom website for your region:

1. Go to Icom America (www.icomamerica.com) or Icom Global (www.icomjapan.com).
2. Navigate to the Support > Downloads section.
3. Search for IC-V80.
4. Look for CS-V80 Programming Software.
5. Note: You may need to register a free account to download the trial or purchase link.

Troubleshooting Common Problems

Conclusion: Which Download Path Should You Choose?

For 99% of users, the answer is Chirp.

Searching for “Icom Ic-v80 Programming Software Download” should lead you directly to Chirp’s website. It is free, actively maintained, and more user-friendly than Icom’s own CS-V80. The only reason to buy the official software is if you are a commercial user (e.g., a school or business requiring Icom warranty compliance) or if you cannot get Chirp to work after trying three different cables.

Final Checklist:

1. Buy a quality USB programming cable (avoid the absolute cheapest $5 cables).
2. Download and install Chirp (latest daily build).
3. Install legacy drivers for your Prolific-based cable.
4. Place the IC-V80 in CLONE mode.
5. Read, edit, write, and enjoy your fully programmed radio.

Now that you know exactly where to find the Icom IC-V80 programming software and how to use it without frustration, you can spend less time wrestling with drivers and more time ragchewing on your local repeaters. 73 (Best regards) and happy programming

Disclaimer: Icom is a registered trademark of Icom Inc. Chirp is an open-source project not affiliated with Icom. Always verify you are downloading software from official or trusted repositories to avoid security risks.

To program your Icom IC-V80 , you can use either the official Icom cloning software or a third-party alternative like RT Systems. Official Software & Drivers

CS-V80 Programming Software: This is the official utility from Icom for managing memory channels and transceiver settings. You can find the product details on the Icom Japan CS-V80 page or check Icom America for regional availability. IC-V80 radio (charged battery)

USB Drivers: If you are using an Icom USB programming cable (like the Go to product viewer dialog for this item.

), you must download the USB Driver to ensure your computer recognizes the radio. Third-Party Alternative

RT Systems WCS-V80: Many users prefer the RT Systems WCS-V80 software because it features a more intuitive spreadsheet-style interface and built-in links to external repeater databases. It is available for both Windows and macOS. Programming Guide & Resources

If you don't have a cable yet or prefer manual entry, you can refer to the official documentation: Manual Download: The IC-V80 Instruction Manual

provides step-by-step instructions for manual frequency entry and memory storage.

Basic Setup: To enter a frequency manually, use the keypad to enter 6 digits (starting from the 100 MHz digit) and push [A•FUNC] followed by [C•MR] for 1 second to save it to a memory channel. CS-V80 | Products | Icom Inc.

CS-V80 | Products | Icom Inc. SOFTWARE. PROGRAMMING SOFTWARE. CS-V80. PROGRAMMING SOFTWARE. programming software - Icom America

What is CS-V80?

CS-V80 is the proprietary Windows-based application designed specifically for the IC-V80 and its sibling, the IC-V80E (European version). It supports all functions of the radio, including:

• Frequency entry (Tx/Rx)
• Duplex shift direction and offset
• CTCSS and DTCS (Digital Coded Squelch) tones
• Power output levels (High/Low)
• Skip/add scan settings
• Memory name tags (up to 8 characters)