Bypassing the iCloud Activation Lock on an Go to product viewer dialog for this item.

running iOS 9.3.5 can be achieved through several methods, ranging from hardware-assisted permanent unlocks to software-based "untethered" skips. An untethered bypass is highly desirable because it allows the device to remain unlocked even after a reboot. Key Bypass Methods for iPad 2 (iOS 9.3.5)

Sliver Tool (Untethered): The most common method involves using the Sliver tool on a Mac. This typically requires an Arduino Uno and a USB Host Shield to put the A5 chip into "pwned DFU" mode. Once in this state, users can delete the Setup.app file, resulting in a permanent, untethered bypass where the device reboots normally.

CheckM8-Based Software: Tools like CheckM8 utilize a bootrom exploit to skip the activation step. While these tools are highly effective, they often require the device to be in a jailbroken state first to apply the bypass successfully.

iRemove Tools: Services like iRemove Tools offer software-based solutions for removing activation locks. Some versions of these tools provide an untethered experience, though they may not be "permanent" if the device is factory reset or restored via iTunes.

DNS Bypass (Limited): A "DNS bypass" involves changing your Wi-Fi DNS settings to a specific server (e.g., 104.154.51.7 for North America). This is not a full untethered bypass; it merely allows you to use a web-based interface for apps like YouTube or browsing while remaining stuck on the Activation Lock screen. Important Limitations

Reset Risks: Even with an untethered bypass, "Erase All Content and Settings" in the device menu will typically relock the iPad.

Functionality: Many bypasses allow for app usage and web browsing, but features like iMessage, FaceTime, and iCloud sync may remain disabled depending on the specific tool used.

Apple Support: If you have original proof of purchase, the most reliable and permanent method is to request an activation lock removal directly from Apple Support. Free untethered iCloud Bypass iPad 2 on iOS 9.3.5

Unlocking the Past: The Guide to iPad 2 (A1395/A1396/A1397) iCloud Bypass

The iPad 2 remains a legendary piece of hardware. Whether you’re using it as a dedicated music player, a digital photo frame, or a simple e-reader, it still holds value. However, many of these legacy devices end up in drawers because of the dreaded iCloud Activation Lock.

If you're looking for an untethered (meaning the bypass persists after a reboot) solution for the iPad 2 (model 935/A1395/A1396/A1397), Understanding the Challenge

The iPad 2 is unique because it features the A5 chip. Unlike newer devices that use the checkm8 exploit (A7 through A11), the A5 chip requires specific hardware communication to bypass the setup screen.

For an untethered bypass, you aren't just "skipping" a screen; you are essentially modifying the file system so the iPad no longer asks for the previous owner's Apple ID during the setup process. Prerequisites: What You’ll Need Before starting, ensure you have the following:

An iPad 2: This guide covers the various versions (Wi-Fi, GSM, and CDMA).

Arduino Uno + USB Host Shield: Because the iPad 2 uses a 30-pin connector and an older exploit (Checkm8-A5), a hardware-based "pwnage" is often required to put the device into a state where it can accept custom commands.

Sliver (by AppleTech752): The industry standard for legacy iOS bypasses.

A Mac Computer: Most legacy bypass tools are built specifically for macOS. Step-by-Step Bypass Process 1. Hardware Initialization (The "Pwned" State)

Since the A5 chip is resistant to software-only injections from a standard boot, you must use an Arduino Uno with a USB Host Shield. Flash the "Checkm8-A5" sketch to your Arduino. Connect your iPad 2 in DFU mode to the Arduino.

Once the LED on the Arduino flashes correctly, your iPad is in a "pwned DFU" state. 2. Entering Ramdisk Mode

Once the device is pwned, connect it back to your Mac. Open Sliver and select the "iPad 2" option. The tool will send a "Ramdisk" to the device.

If successful, you will see a mounting progress bar or a specific logo on the iPad screen. This allows the computer to read and write to the iPad's internal storage system. 3. Deleting the Setup.app

This is the core of the bypass. By deleting or renaming Setup.app, you tell iOS that the initial setup has already been completed.

In your bypass tool, select "Relay Device Info" and then "Delete Setup.app." The device will reboot. 4. Achieving the Untethered State

To ensure the bypass is untethered, some tools will install a "Factory Activation" certificate. This tricks the iPad into thinking it has been officially activated by Apple’s servers. Without this, some devices may re-lock upon a hard reboot. Limitations to Keep in Mind

While an untethered bypass makes the iPad usable again, it isn't a "factory reset" fix.

No SIM Services: On GSM models, cellular data will likely not work.

iCloud Services: You may not be able to sign into a new iCloud account via Settings (though the App Store usually works fine).

iOS Version: This process is most stable on iOS 9.3.5 or 9.3.6. Is it worth it?

If you have the hardware (Arduino) on hand, bypassing an iPad 2 is a fun weekend project that saves a device from the landfill. It’s a great way to learn about the history of iOS security and breathing new life into a classic 9.7-inch display.

Disclaimer: This guide is for educational purposes only. iCloud bypasses should only be performed on devices you legally own where the original credentials have been lost.

Do you have the Arduino and USB Host Shield hardware ready to begin the flashing process?

Bypassing an iCloud lock on an depends heavily on your hardware and comfort level with technical tools. Achieving a truly untethered

bypass—where the device remains unlocked even after a reboot—can be challenging for this specific model without certain hardware. Method 1: Software Bypass (Often Tethered)

For most users, software tools provide a temporary "tethered" bypass. This means if the battery dies or you restart the iPad, you may need to reconnect it to a computer to unlock it again. Sliver (Mac): A popular tool from AppleTech752

that can bypass the activation lock on the iPad 2. It often requires the device to be in pwned DFU mode , which sometimes needs an Arduino Uno USB Host Shield for older A5 chip devices like the iPad 2. iRemove Tools:

A paid option that can provide a more streamlined bypass, though it may still be limited in functionality (e.g., no Apple ID login). DNS Bypass:

A simple, non-permanent method. By changing your Wi-Fi DNS settings (e.g., to 104.154.51.7

), you can access a captive portal with web-based apps, though this is not a full system bypass. Method 2: Hardware Bypass (Permanent & Untethered)

Because the iPad 2 is an older device, certain hardware "tricks" are the only way to achieve a permanent, untethered result. Resistor Removal (Cellular Models Only):

For iPad 2 models with a SIM card slot (A1396/A1397), physically removing a specific resistor on the logic board can trick the device into thinking it is a Wi-Fi-only model. Once restored via iTunes, it may activate without the iCloud lock. Arduino + USB Host Shield:

Using these tools allows you to send a specific exploit to the iPad 2 to delete

. This is highly technical but is the standard community method for a "semi-untethered" or untethered experience on A5 devices. Method 3: Official iCloud Removal

If you have proof of purchase or can contact the original owner, this is the only "official" way to unlock the device.

iPad 2 iCloud Bypass Untethered: A Comprehensive Guide

The iPad 2, released in 2011, was a significant upgrade to Apple's tablet lineup, offering improved performance, a front-facing camera, and more. However, for many users, the device's usefulness was limited by its activation lock, which tied the iPad to the owner's iCloud account. This made it difficult to use the device if it was lost, stolen, or purchased second-hand without the original owner's credentials. Fortunately, a solution emerged in the form of an untethered iCloud bypass for the iPad 2, specifically for devices with the 935 bootrom.

Understanding the iCloud Activation Lock

The iCloud Activation Lock, introduced with iOS 7, was designed to prevent unauthorized use of Apple devices. When a user enables Find My iPhone, their Apple ID and password are stored on Apple's servers and linked to the device. This means that even if someone tries to erase or restore the device, it will still require the original owner's Apple ID and password to activate and use.

The 935 Bootrom and Its Significance

The 935 bootrom, a component of the iPad 2's processor, played a crucial role in the device's vulnerability to certain exploits. The bootrom is responsible for loading the iOS operating system. In the case of the iPad 2 with a 935 bootrom, a specific vulnerability was discovered that allowed developers to create an untethered iCloud bypass.

What is an Untethered iCloud Bypass?

An untethered iCloud bypass refers to a method that allows users to bypass the iCloud Activation Lock without being tethered to a computer or requiring the original owner's credentials. This means that the device can be used freely, with full access to all its features, without the need for a computer or any dependency on the original owner's Apple ID.

The iPad 2 935 iCloud Bypass Untethered Solution

Developers discovered an exploit in the iPad 2's 935 bootrom that could be leveraged to create an untethered iCloud bypass tool. This tool, often referred to as "ipad 2 935 icloud bypass," allows users to bypass the iCloud Activation Lock on their iPad 2 devices with a 935 bootrom.

Key Features of the Bypass:

Untethered: The bypass is untethered, meaning that once it's applied, the device can be used independently without the need for a computer.
No Need for Apple ID: Users do not need the original owner's Apple ID and password to activate and use the device.
Access to Full Functionality: The bypass allows users to access all the features of the iPad 2, including the App Store, iCloud services (with some limitations), and more.

How to Perform the Bypass:

The process of bypassing the iCloud Activation Lock on an iPad 2 with a 935 bootrom involves several steps and requires specific software tools. It's essential to note that attempting to bypass the activation lock may violate Apple's terms of service and could potentially lead to legal issues.

Check Bootrom: Verify that your iPad 2 has a 935 bootrom.
Download the Bypass Tool: Obtain the specific iCloud bypass tool designed for the iPad 2 935.
Follow Instructions: Carefully follow the instructions provided with the tool to bypass the iCloud Activation Lock.

Conclusion and Considerations

The iPad 2 iCloud bypass untethered solution offers a way for users to overcome the limitations imposed by the iCloud Activation Lock on their devices. However, it's crucial to consider the legal and ethical implications of using such methods. Additionally, users should be aware that future iOS updates may patch the vulnerabilities used in the bypass, potentially rendering it ineffective.

For those looking to purchase second-hand devices or reactivate their own iPads, understanding the options and risks associated with iCloud bypass methods is essential. Always ensure to use legitimate and authorized methods to activate and use your devices whenever possible.

To bypass the iCloud activation lock on an iPad 2 (running iOS 9.3.5) untethered, you typically need to use a combination of hardware (like an ) or software tools (like ) to delete the Hardware Method (Most Stable)

The most reliable untethered method for A5 devices like the iPad 2 involves putting the device into "pwned DFU" mode using hardware. Requirements: Arduino Uno USB Host Shield The Process:

Use the Arduino to exploit the iPad and enter pwned DFU mode. Connect to a Mac and use the tool Sliver by AppleTech752 Select the Ramdisk iCloud Bypass option and click Delete Setup.app This is generally untethered

, meaning you can reboot the device without relocking it. However, if you "Reset and Erase All Content," it will relock. Software-Only Methods (Limited/Tethered)

While some tools claim to work without an Arduino, they are often tethered or have major limitations:

I understand you're looking for information on bypassing iCloud activation on an iPad 2 (presumably running iOS 9.3.5 or 9.3.6) using a method involving the "935" IC (likely referring to a hardware component like the NAND flash or a specific test point). However, I must clarify a few important points before providing any technical guidance.

The Last of Its Kind: Achieving an Untethered iCloud Bypass on iPad 2 (iOS 9.3.5) in 2024-2025

Conclusion

There is no safe, legal, untethered iCloud bypass for iPad 2 using any "935 IC" method. Claims online are outdated, fraudulent, or tethered at best. If you own the device and are locked out due to a forgotten Apple ID, your only reliable path is through Apple support. If you bought a locked iPad secondhand, request a refund from the seller.

For educational research, study the checkm8 bootrom exploit (which does NOT work on iPad 2 because it uses an older A5 chip without checkm8 support). The iPad 2 is effectively immune to modern jailbreak‑based bypasses.

Stay safe, respect digital property rights, and avoid tools that promise impossible results.

You're looking for information on iCloud bypass methods for an iPad 2 with a 935 icloud lock, specifically an untethered solution. I'll provide some general insights and guidance.

Understanding iCloud Lock and Bypass

The iCloud lock, also known as Activation Lock, is a security feature introduced by Apple to prevent unauthorized access to iOS devices. When a device is locked to an iCloud account, it requires the account credentials (Apple ID and password) to activate and use the device.

An iCloud bypass is a method to circumvent this lock, allowing users to activate and use their device without the original iCloud account credentials. There are various types of bypass methods, including tethered and untethered solutions.

Tethered vs. Untethered Bypass

Tethered bypass: A tethered bypass requires a computer to be connected to the device every time it boots up. This method is less desirable, as it limits the device's mobility and functionality.
Untethered bypass: An untethered bypass, on the other hand, allows the device to boot up normally, without requiring a computer connection. This method provides more freedom and flexibility.

iPad 2 (935) iCloud Bypass

The iPad 2 (935) model is an older device, and iCloud bypass methods may vary depending on the iOS version installed.

Untethered iCloud bypass solutions for iPad 2 (935) exist, but they often rely on specific exploits and may not be compatible with all iOS versions. Some popular tools for iCloud bypass on older iOS devices include:

iFile: A popular file manager for jailbroken iOS devices, which can be used to bypass iCloud activation.
Cydia: The Cydia store offers various iCloud bypass tweaks and packages, but be cautious when using these, as they may not be compatible with your device or iOS version.
iCloud bypass tools: Some third-party tools claim to offer untethered iCloud bypass solutions for iPad 2 (935), but be aware that these tools may not be reliable, and some might even be scams.

Risks and Considerations

Before attempting an iCloud bypass, consider the following:

Warranty and support: Bypass methods may void your device's warranty and make it ineligible for official support.
Security risks: Some bypass methods may expose your device to security vulnerabilities.
Stability and functionality: Bypass methods may not provide a stable or fully functional experience.

Conclusion

While untethered iCloud bypass solutions for iPad 2 (935) exist, they may come with risks and limitations. Before attempting a bypass, ensure you understand the potential consequences and explore alternative solutions, such as:

Contacting the original owner: Reach out to the original owner or seller to obtain the iCloud account credentials.
Restoring the device: Restore the device to its factory settings and set it up as new.

If you still want to pursue an iCloud bypass, research reputable sources and be cautious when using third-party tools and tweaks.

Finding an untethered iCloud bypass for the iPad 2 (Model A1395, A1396, or A1397) running iOS 9.3.5 is a common challenge for those looking to revive older hardware. Because the iPad 2 uses the older 32-bit A5 chip, the methods for bypassing the Activation Lock are quite different from modern iPhones.

Here is a comprehensive look at how the process works, the tools required, and what "untethered" actually means for this specific device. Understanding the iPad 2 and iOS 9.3.5 Bypassing

The iPad 2 is unique because it is vulnerable to certain hardware-level exploits that were patched in later generations. On iOS 9.3.5—the final firmware version for this device—an "untethered" bypass is the gold standard.

Tethered: If you reboot the device, it returns to the "Activation Lock" screen.

Untethered: The bypass persists even after a power cycle or a dead battery. Prerequisites

Before attempting a bypass, you need to identify your specific iPad 2 revision. Some iPad 2 models (specifically the "iPad 2,4" released in 2012) have a slightly different processor that may require different file sets. What you will need:

An Arduino Uno + USB Host Shield: For the most reliable, permanent bypass, hardware interaction is often required to put the A5 chip into "pwned DFU" mode.

Sliver (by AppleTech752): Currently the most popular software tool for Mac users to handle A5 device bypassing.

30-pin USB Cable: Ensure it is an original or high-quality data cable, as cheap charging cables often fail during the exploit process. Step-by-Step Method: The Arduino Approach

While some "software-only" methods claim to work, they are often tethered. The Arduino method is the most successful way to achieve a lasting result on the iPad 2. 1. Entering Pwned DFU Mode

The A5 chip requires a "Checkm8-style" exploit, but because it's 32-bit, you must use an Arduino Uno with a USB Host Shield. You will flash a specific sketch (checkm8-a5) to the Arduino, plug your iPad 2 into the shield, and wait for the LED to indicate the device is in a pwned state. 2. Using Sliver to Delete Setup.app Once the device is in pwned DFU mode: Connect the iPad to your Mac. Open Sliver and navigate to A5 Bypass > iPad 2.

Select Load Ramdisk. This sends the necessary files to the device to allow file system access.

Once the ramdisk is loaded, select Relay Device Info and then Delete Setup.app. 3. The Result

The iPad will reboot. Because Setup.app (the program responsible for the Activation Lock screen) has been deleted or renamed, the iPad will boot directly to the home screen. The Limitations of a 9.3.5 Bypass

Even with a successful untethered bypass, there are "legacy" issues to keep in mind:

No Cellular Data: If you have the GSM/CDMA model (A1396/A1397), the cellular functions will likely be disabled. The iPad will function as a Wi-Fi-only device.

App Store Compatibility: iOS 9.3.5 is quite old. Most modern apps require iOS 12 or 13. You will need to use the "Purchased" section of the App Store to download older, compatible versions of apps like Netflix or YouTube.

iCloud Services: You may not be able to sign into iCloud via the main Settings menu. Usually, you must sign into the App Store separately to download apps. Is it Permanent?

As long as you do not Restore or Update the device via iTunes/Finder, the bypass will remain. A standard "Erase All Content and Settings" from within the iPad may also re-lock the device, so it is best to avoid factory resets once the bypass is complete.

Disclaimer: This guide is for educational purposes and for those who have forgotten their own credentials or wish to reduce e-waste by reviving obsolete hardware. Bypassing activation locks on stolen property is illegal.

An untethered iCloud bypass on an iPad 2 running iOS 9.3.5/9.3.6 can be achieved by putting the device into DFU mode and using tools like Sliver or 3uTools to delete the

via a checkm8-based ramdisk. Making the bypass permanent requires installing the Phœnix jailbreak and using Filza to ensure

remains removed after reboots, though this often results in a loss of cellular functionality and iCloud services. For more details, visit the AppleTech752 YouTube channel.

Unlocking the Past: The Ultimate Guide to iPad 2 (9.3.5) Untethered iCloud Bypass

If you are holding an iPad 2 stuck on the "Hello" screen with an iCloud Activation Lock, you might think you have a very expensive paperweight on your hands. Usually, iCloud locks are insurmountable security walls. However, the iPad 2 running iOS 9.3.5 is a unique beast in the Apple ecosystem.

Due to a specific hardware configuration and the aging software architecture, this specific model offers a rare opportunity: a hardware-based, untethered iCloud bypass.

In this guide, we will explain exactly what this means, how it works, and the steps you need to take to bring your device back to life.

Step 2: Reading the NAND

The storage chip (NAND) on the iPad 2 logic board needs to be read. You will use a NAND programmer to read the current data from the chip.

1. DNS Bypass (Temporary, Tethered)

This redirects activation requests to a fake server. Works until reboot.

Change DNS to a custom server (e.g., 78.109.49.89) during Wi‑Fi setup.
After bypass, device is limited (no iCloud, no App Store, no push notifications).
Reboot brings back the lock.

Why Bypass iCloud Activation Lock?

There are several scenarios where users might seek to bypass the iCloud activation lock:

Lost or Forgotten Credentials: Users may have forgotten their Apple ID or password.
Purchased Device: A device might have been purchased second-hand with the iCloud lock still in place.
Device Stolen: In cases of theft, bypassing the lock might be considered to recover the device.

3. The State: Untethered

This is the most important word. A tethered bypass means that every time the iPad powers off or the battery dies, you must plug it into a computer and run software to boot it again. An untethered bypass persists across reboots. The iPad functions entirely independently.

The Bold Truth: A true untethered iCloud removal (where the device is permanently disassociated from the previous Apple ID) does not exist for iOS 9.3.5. However, an untethered activation bypass does exist. This allows you to use the iPad normally (Wi-Fi, apps, camera, games) as if it were a new device, with the sole exception that you cannot sign into the original owner’s Apple ID.

Part 5: Step-by-Step Guide to Achieve Untethered Bypass

Disclaimer: This is for educational purposes and for devices you legally own. Bypassing someone else’s iCloud lock is illegal in most jurisdictions.

Prerequisites:

iPad 2 running iOS 9.3.5 (Check: Settings > General > About > Version).
A Windows PC or Intel Mac.
The iPad’s UDID (You don't need it for bypass, but needed for iMessage fix).

Step 1: Preparation

Install iTunes 12.6.5.3 (Remove newer versions first).
Disable antivirus (false positives on exploit payloads).
Download Sliver 6.2 from the official site (check GitHub for "Sliver iCloud").

Step 2: Enter kDFU Mode

Open LeetDown. Connect iPad in normal DFU (Power + Home for 10 seconds).
LeetDown will detect the iPad 2 and push the "kDFU" payload. The screen will stay black (this is correct).

Step 3: Run Sliver

Open Sliver. Select "iCloud Bypass" > "A5 (iPad 2)" > "iOS 9.3.5 Untethered."
Click "Bypass." Sliver will upload the modified activation records and patch the setup.app.
Wait for the green "Done" message. Do not disconnect.

Step 4: Reboot

Press Power + Home to hard reset the iPad.
Let it boot normally. Previously, you would see the Hello screen. Now, you should see the home screen.

Step 5: Verification

Go to Settings. You will likely see "Unable to check for update" or "iCloud Account: None."
You cannot press "Sign in to iCloud" – it may re-lock. Instead, use "Sign in with Apple ID" inside individual apps (like App Store) if needed.

Congratulations. You now have an untethered iPad 2. Turn it off, turn it on, let the battery die – the bypass holds.

Ipad 2 935 Icloud Bypass Untethered [new] Official