Ivoclar Programat P95 Manual !!hot!! [FAST]

The Ivoclar Programat P95 Go to product viewer dialog for this item.

is a microprocessor-controlled, fully automatic vacuum ceramic furnace designed for high-accuracy dental ceramic firing. Key Features & Specifications

Automated Operation: Features fully automatic vacuum firing and a motorized furnace head with adjustable closing times.

Control Interface: Includes a numeric keypad for easy data entry and a clear display showing both actual and setpoint temperature values. Firing Capabilities: Capable of reaching temperatures up to

) with microprocessor control ensuring stable temperature characteristics.

Cooling System: Integrated slow cooling function and automatic opening of the furnace head upon program completion.

Power Protection: Equipped with a "Power Fail Save System" that bridges short power interruptions (up to 10 seconds) to prevent faulty firing of restorations. Maintenance & Operation Tips Ivoclar Programat P95 Manual

Installation: Position the unit on a flat surface away from radiators or heat sources. Ensure air vents on the rear panel remain unrestricted at all times.

Cleaning: Clean external surfaces only with a dry or slightly moist cloth; never use solvents. Keep the sealing ring and base rim clean to ensure a proper vacuum seal.

Calibration: It is recommended to check temperature accuracy with an independent system and recalibrate periodically to account for contamination or residue buildup in the firing chamber.

Safety: Always use the supplied tongs to place objects in the firing chamber and avoid touching hot furnace parts during or immediately after operation.

For detailed operating steps, you can refer to the full Programat P95 Operating Instructions PDF . IVOCLAR VIVADENT Programat P95 buy on Bimedis

Ivoclar Programat P95 is a legacy, high-performance vacuum ceramic furnace designed for dental laboratories to perform precise firing of various porcelain materials. Known for its reliability and microprocessor-controlled accuracy, it offers a range of programmable options to ensure consistent restoration results. Core Specifications Programs: Features 99 total firing programs. Dimensions: Approximately 41.5 x 43.3 x 29.5 cm. Weight: Roughly 16.5 kg. The Ivoclar Programat P95 Go to product viewer

Stand-by Temperature: Freely programmable between 100°C and 700°C (212°F–1292°F).

Heating Rate: Standard programs often utilize a rise of 60°C per minute. Key Features and Functions

The furnace utilizes a membrane-sealed keypad for data entry and features a multi-display system to show real-time furnace temperature and program parameters.

Automatic Programming: Programs P01 to P08 are pre-set for standard firings (e.g., glaze or dentin) but remain partially adjustable.

Vacuum Control: Integrated vacuum pump support allows for precise vacuum-on (V1) and vacuum-off (V2) parameters within specific programs.

Cooling Functions: Includes long-term cooling (L) where the furnace only opens once a pre-set low temperature is reached to prevent ceramic fractures. Press New Program

Visual Indicators: A green sector on the vacuum indicator signals active operating vacuum, while flashing dots on the display indicate data input errors. Operating Instructions

Initial Setup: Place the furnace on a fire-proof surface, ensuring rear air vents are clear.

Startup: Turn on the main switch at the rear. The unit will perform self-tests before entering standby mode.

Selecting a Program: Use the P key followed by numeric input to choose a program (e.g., P07 for dentin firings).

Running a Cycle: Press the START key once the buzzer sounds and the restoration is placed on the firing tray. The furnace head will close automatically based on the pre-set S (closing time).

Stopping/Aborting: Press the STOP key once to pause a program or twice to abort the vacuum and stop heating. Maintenance and Safety IVOCLAR VIVADENT Programat P95 buy on Bimedis

Chapter 5: Creating a Custom Program

Step-by-step from the manual:

  1. Press New Program.
  2. Enter name (max 12 characters).
  3. Set drying time (0–20 min).
  4. Set low temperature (450–600°C).
  5. Set high temperature (700–950°C).
  6. Define heating rate (°C/min).
  7. Set vacuum on/off and vacuum threshold.
  8. Press Save.

🔥 Key sections typically found in the P95 manual

Q3: The manual mentions “Service Mode.” How do I access it?

A: The service mode is reserved for certified technicians. The manual only provides a warning: “Unauthorized entry may void warranty.” To enter, you typically need a special code provided by Ivoclar technical support.