The KESS V2 5.017 SD card image is critical for the proper functioning of this popular ECU tuning tool. Often, errors like "External Exception EEFFACE," "Invalid Protocol," or "Wake Up Error" are caused by a corrupted internal SD card. Essential Files and Tools To repair or update your KESS V2 5.017 SD card
, you will typically need several specialized files and software tools:
Decrypted SD Image: A 2021-updated image file (often around 122MB to 128MB) specifically for firmware 5.017.
Imaging Tools: HDD Raw Copy Tool or Win32 Disk Imager are standard for writing raw images to SD cards.
Hex Editor: WinHex is used for advanced block manipulation and key file generation.
XorFiles: This utility is required to combine the key file with the decrypted image into a format the KESS hardware recognizes. Step-by-Step Replacement Guide
If you need to replace your SD card, follow this general procedure:
Prepare a New SD Card: Use a high-quality 4GB or larger SD card. Wipe the card by filling it with "00" values using WinHex to ensure no residual data interferes with the process.
Generate the Unique Key: Insert the blank card into your KESS unit and connect it to your PC. Open K-Suite; it may throw an error, but this process often generates a unique hardware key on the SD card.
Extract the Key Block: Use WinHex to read the SD card and copy the specific key block (often located at offsets 000000D0 - 0000019F) into a new file named "Key".
Create the Final Image: Use XorFiles to merge your downloaded decrypted image with your unique hardware key file. This ensures the firmware is specifically tied to your device.
Write to Card: Use Win32 Disk Imager or HDD Raw Copy Tool to write the final merged image back to the SD card. Troubleshooting Common Errors
Wake Up Error: Often fixed by re-formatting the SD card to FAT32 or checking the internal soldering of the SD card slot.
External Exception EEFFACE: This can occur if the tool is connected to the internet while software is running, which may damage the NXP chip. If replacing the SD card doesn't work, the NXP chip itself may need a rework.
No Protocol Found: This usually indicates the software cannot find the protocol files on the SD card. Ensuring the KSuite/Update folder content is correctly placed on the card can resolve this.
For reliable replacement parts, you can find pre-loaded cards on AliExpress or OBD2Shop.
You can find archived community-shared images on platforms like Google Drive or Mega. Google Drive Images: Several updated versions of the Kess V2 5.017 SD card image are hosted on Google Drive.
Mega.nz Backup: A free backup image provided by community members is available for download at Mega with the password batja958. 2. Tools Required for Restoration
To write these images or repair a corrupted card, you will need specific software:
WinHex: Used to view/edit raw disk sectors and fill the SD card with "00" values before restoration.
HDD Raw Copy Tool: Often recommended for cloning or restoring the image to a new card.
XorFiles & Win32DiskImager: Used for handling decrypted images and writing them to the physical card. 3. Step-by-Step Restoration Guide
If your device is failing to read the card, follow this standard procedure to create a fresh SD card: Preparation: Insert your SD card into a PC card reader.
Wipe the Card: Use WinHex to select the drive and "Fill Block" with the value 00.
Key Extraction (Advanced): For custom encryption, some users extract a 208-byte "Key" (found from 0x000000D0 on the card) to decrypt standard image files using XorFiles. kess v2 5017 sd card image download 2021
Write Image: Use HDD Raw Copy Tool or Win32DiskImager to write the downloaded image file (.img) to the SD card.
Initialize: Place the card back into the Kess device and open the KSuite software on your computer to trigger an update/initialization. 4. Purchasing Pre-Loaded Cards
If software restoration fails, pre-configured 4GB replacement cards are available from specialized automotive electronics retailers. Kess 5017 New SD Vers3 | PDF | Games & Activities - Scribd
The document provides instructions for decrypting an encrypted SD card from a Kess 5017 device using WinHex and XorFiles software. Scribd Kess V2 SD Card Key Creation Guide | PDF - Scribd
I do not provide, host, or link to copyrighted KESS V2 SD card images. If you own an original KESS V2, you already have the legal right to use the software and may create backups for personal use. If you own a clone, you are using the tool without Alientech’s license, and any software image you use is technically pirated.
Summary: The KESS V2 5017 SD card image (2021) is a critical system image for ECU tuning tools. Legitimate users get it via official updates. Clone users seek community-shared images but face compatibility and legal risks. Always back up your original SD card before attempting any modification.
For users of the KESS V2 5.017 ECU programmer, a corrupted or missing SD card image is a common cause for the "Wake Up Error" or failed protocols. Restoring the SD card image allows the device to read essential ECU maps and programming instructions. Download Links
Several community-shared resources provide the necessary image files for the 5.017 version: Google Drive: Kess V2 5.017 SD Card Image [UPDATED]. Mega.nz: Kess V2 5.017 Free Download (Password: batja958).
AliExpress: Ready-to-use 4GB replacement cards are available from merchants like Shenzhen TO OBD2 Tech. How to Restore the SD Card
To fix a corrupted card or set up a new one, follow these general steps: Preparation: Format a high-quality 4GB SD card to FAT32.
Imaging: Use a tool like HDD Raw Copy Tool or Win32DiskImager to write the downloaded .img file to the card.
Advanced Encryption (Optional): If the image is decrypted, tools like WinHex and XorFiles may be needed to generate the specific encryption key for your hardware.
Verification: Insert the card into the KESS unit. If you still see a "Wake Up Error," ensure the card slot contacts are clean and the internal chip is firmly soldered. Key Technical Specifications
The KESS V2 5.017 is a popular ECU chip tuning tool widely used for reading and writing engine and transmission data. A critical component of this device is its internal microSD card, which stores firmware, protocols, and configuration files. If this card becomes corrupted or is lost, the device may fail to initialize, often displaying errors such as "Wake up error" or "Invalid map data". Why You Need a KESS V2 5017 SD Card Image
The internal SD card in many "China Clone" KESS V2 units is prone to failure due to the low-grade flash memory typically used in manufacturing. A high-quality SD card image allows you to:
Recover "Bricked" Units: Restore a device that no longer boots or connects to KSuite software.
Upgrade Hardware Stability: Replace the factory card with a more reliable Class 10 or U1 card (4GB to 16GB) to prevent future data corruption.
Fix RSA and Checksum Errors: Properly configured images can resolve software-side communication failures. Where to Download 2021/2022 SD Card Images
Verified images are often shared on automotive engineering forums or provided by hardware vendors.
Community Links: Many users rely on shared Mega.nz mirrors or Google Drive links found in professional communities like MHH Auto or Autonumen (Password often: batja958).
Ready-to-Use Cards: For those who prefer a hardware solution, pre-flashed replacement cards are available at retailers like AliExpress. How to Restore the SD Card Image
Restoring the card requires a "bit-for-bit" write process to ensure hidden partitions and encrypted keys are preserved. Kess V2 SD Card Key Creation Guide | PDF - Scribd
The document provides instructions for decrypting an encrypted SD card from a Kess 5017 device using WinHex and XorFiles software.
Kess V2 5.017 SD card image is a vital system file used to restore or repair the internal storage of the Kess V2 ECU programming tool. This becomes necessary when the device fails to boot, displays "Protocol Not Found" errors, or when the original SD card becomes corrupted. Key Features of the 2021 Update Protocol Stability The KESS V2 5
: Corrects issues where protocols appear greyed out or inaccessible. Hardware Compatibility
: Specifically designed for firmware version 5.017, commonly found in "Red PCB" or "Green PCB" clone units. CID Independence
: Newer images often work on standard SD cards without requiring a specific Card Identification (CID) number, making replacement easier. AliExpress Required Tools for Restoration
To prepare a new SD card, you typically need the following software:
: Used to wipe the card (fill with "00") and extract security keys.
: Necessary for decrypting or merging the image with the device-specific key file. Win32DiskImager or HDD Raw Copy Tool
: Used to write the final image file directly to the microSD card. Restoration Process Overview Preparation
: Insert a high-quality microSD card (at least 4GB) into your PC. Use
to fill the entire card with "00" values to ensure it is completely blank. Key Extraction
: If you have the original card, extract the 208-byte (13-line) encryption key from the offset starting at 0x00000270 0x000000D0 Image Merging
to combine the downloaded decrypted image with your extracted key. : Write the processed image to the new card using Win32DiskImager Activation
: Place the card back into the Kess V2 unit. Upon connecting to a PC and running KSuite, the device should automatically update its protocols and become functional again. topdiag.by Sourcing the Image
While various community forums host these files, reliable images are often shared via: Recovery SD card Kess 5.017_Ktag 7.020 - GT-Forum.Info
The KESS V2 5.017 SD card image from 2021 is a critical recovery tool designed to repair corrupted or non-functional KESS V2 V5.017 and K-TAG V7.020 hardware. This 4GB digital file acts as the system's "backbone," containing the necessary encrypted firmware and file structures required to restore access to greyed-out or missing protocols. Key Features and Enhancements
Restoration Capabilities: Primarily used to fix "Wake Up" errors, protocol not found errors, or corrupted system files.
Protocol Expansion: Restores support for over 140 additional protocols compared to older firmware versions (like 4.036), covering cars, trucks, tractors, and motorcycles.
Software Compatibility: Optimized to work with K-Suite 2.80, which improved reading speeds and vehicle compatibility lists.
Hardware Stabilization: The image is configured for Master Version hardware with no token limitations, allowing for lifetime use without a reset button.
Encrypted Security: The content is encrypted to ensure secure storage of sensitive ECU programming files. Technical Specifications 5.017 Kess V2 sd card lost, what to do? - Autonumen
For users seeking to restore or update a KESS V2 5.017 device, the SD card image is essential for resolving "Wake up error" issues or protocol missing errors. While official 2021-specific images are often tied to specific K-Suite software versions like V2.80, the underlying recovery process remains consistent across older and newer clones. Download & Recovery Resources SD Card Image Links:
Direct recovery files (including Google Drive and Mega.nz options) are frequently shared on community forums like Autonumen and MHH Auto.
Some vendors provide a 4GB replacement card pre-loaded with the necessary files if digital restoration fails. Essential Software:
K-Suite V2.80: The latest common version for FW 5.017, which provides updated vehicle lists and bug fixes.
HDD Raw Copy Tool: Used to write the downloaded .img or .bin file directly to a new SD card. Summary: The KESS V2 5017 SD card image
SD Formatter: Recommended for preparing the card before any file transfers. Step-by-Step Restoration Guide
Format a New Card: Use a high-quality 4GB to 16GB Class 10 MicroSD card. Format it to FAT32 using SD Formatter.
Write the Image: Use HDD Raw Copy Tool to flash the downloaded KESS 5.017 image file onto the card. Prepare K-Suite:
Place the updated protocol files in the C:\KSuite\Update\ folder on your PC. Ensure the cfg file matches your device's serial number.
Device Update: Insert the card into the KESS unit and connect it to your PC via USB. Open K-Suite; the software should automatically recognize the new card and begin the protocol update process.
Offline Use: It is highly recommended to disable your internet connection while using clone devices to prevent accidental blocking or hardware locking. Common Issues 5.017 Kess V2 sd card lost, what to do? - Autonumen
The Kess V2 5.017 SD Card Image (2021 update) is a widely used fix for corrupted firmware in clone tuning tools. Reviews from technical forums and users indicate it is an essential resource for reviving "bricked" devices or fixing persistent software errors. Performance and Reliability
System Restoration: It is highly effective for fixing common device failures like "Wake Up Error," "Protocol Not Found," and "EEEface Error".
Stability: Using a high-quality, high-speed SD card (Class 10 or U1) with this image is critical; reviewers note that the cheap cards included with clone units often cause 60% of firmware corruption issues.
Software Compatibility: The 2021 version (often paired with K-Suite 2.80) reportedly offers faster reading speeds and broader vehicle support compared to older 2.23 or 2.47 versions. Installation Experience
Difficulty: Moderate. It requires specific tools like HDD Raw Copy Tool or WinHex to write the image correctly.
Hardware Prep: Users recommend formatting the new SD card using SD Formatter with "Overwrite" settings before applying the image. Common Criticisms
Risk of Damage: While the image works for most, some users report "killing" multiple cards if the internal PCB of the Kess unit has hardware defects.
Manual Setup: The process is not "plug and play." You often have to manually rename file extensions (e.g., .img, .key) and use key file generators for the device to recognize the firmware.
Verdict: This image is a "lifesaver" for professional tuners using 5.017 clones, provided you replace the original "Chinese junk" card with a reputable 4GB–16GB high-speed card.
Are you currently facing a specific error code like "Wake Up Error," or are you just looking to update your vehicle protocols? Generic K-Suite Software Update 2.80 for Kess V2 5017
However, directly providing or pointing to a specific download for an SD card image, especially for a device like Kess V2 with numerous versions and software iterations, can be challenging due to the following reasons:
Legality and Copyright: Distributing or downloading copyrighted material without permission is illegal. Software and firmware for devices like the Kess V2 are typically proprietary.
Device Compatibility and Safety: Using software or firmware not specifically designed for your device or region can lead to device malfunction or damage.
Version Compatibility: Ensuring that the software version is compatible with your device and meets your needs is crucial.
Given these considerations, here are some general steps and advice on how to proceed:
Kessil Official Website: The first and safest place to look for software updates, including SD card images for your Kess V2 5017, is the official Kessil website or your local distributor's website. They might have a support or downloads section where you can find the latest software.
Contact Support: If you're unable to find what you're looking for, reaching out to Kessil's customer support or your local distributor can provide guidance on obtaining the correct and legal version of the software you need.
While we are now in 2025, the 2021 image (5017) remains the most stable release for clone KESS V2 devices. Later images (2022-2024) often contain “time bombs” – code that bricks clone units after a certain date. The 2021 image has been thoroughly reverse-engineered and patched.
For original Alientech users, always download the latest from their official portal.
The 5017 firmware is surprisingly robust for vehicles produced roughly before 2017.