Skip to main content

Linkrunner At 2000 Firmware Update !!better!! May 2026

Firmware for the discontinued NetAlly LinkRunner AT 2000 is updated via the LinkRunner AT Manager software on a Windows PC or directly on the device using a USB connection. Users should download the firmware file from the NetAlly product page and keep the file in its original .zip format for the update process. For more details, visit AI responses may include mistakes. Learn more LinkRunner AT Legacy - NetAlly

The NetAlly (formerly Fluke) LinkRunner AT 2000 is updated using the LinkRunner AT Manager software on a Windows PC. As of late 2024, the LinkRunner AT 2000 has reached End-of-Sale status, but firmware support continues until September 30, 2027. 🛠️ Update Requirements PC Software: NetAlly LinkRunner AT Manager (Windows only). Connection: USB-A to Micro-USB cable.

Cloud Account: A free Link-Live account is required to download files. Battery: Ensure the unit is fully charged before starting. 📝 Update Process Download Firmware: Log into Link-Live. Go to Support > Software Downloads. Download the firmware .zip file (Do not unzip it). Connect Device: Power on the LinkRunner AT 2000. Connect it to your PC via USB. Run Manager Software: Open LinkRunner AT Manager on your computer. Click the Tools menu and select Update Firmware. Select & Install: Browse and select the downloaded .zip file. Click Update (or press F1 on the tester if prompted).

The process takes roughly 5 minutes; do not disconnect the cable until the unit reboots and the software confirms completion. ⚠️ Important Lifecycle Dates End-of-Sale June 2, 2024 Last AllyCare Purchase September 30, 2026 End-of-Life (Final Support) September 30, 2027 linkrunner at 2000 firmware update

Note: If your unit is running a version older than 2.4.3, you must update to at least this version to enable Link-Live cloud features. If you'd like, I can help you:

Troubleshoot a failed update (e.g., "Device not found" errors)

Compare your AT 2000 to the newer LinkRunner AT 3000/4000 models Find the specific release notes for version 2.5.4 or later Let me know how you'd like to proceed! LinkRunner AT Firmware Update Guide | PDF - Scribd Firmware for the discontinued NetAlly LinkRunner AT 2000

Step-by-Step Update Procedure

  1. Download the firmware

    • Go to NetScout Support → Product: LinkRunner AT 2000.
    • Download the latest .bin file and the LinkRunner PC Tool installer.

  2. Install the PC Tool and USB driver

    • Run the installer.
    • Connect the LRAT-2000 to your PC via micro-USB.
    • Turn on the LinkRunner.
    • Windows will detect “LinkRunner AT 2000” – the driver installs automatically.

  3. Launch the LinkRunner PC Tool

    • Select the COM port assigned to the device (check Device Manager).
    • Click Connect – the tool will display current firmware version.

  4. Start the update

    • Click Update Firmware.
    • Browse to the downloaded .bin file.
    • Confirm the version number.
    • Click Start.

  5. Monitor progress

    • The tool shows: “Erasing → Writing → Verifying.”
    • The LRAT-2000 screen may go blank or show a status bar.
    • Total time: 2–4 minutes.

  6. Completion

    • The tool displays “Update successful.”
    • The LinkRunner reboots automatically.
    • Disconnect USB and verify the new version in Settings → About.

B. The Computer Environment

Method 2: USB Update (For Windows Users)

  1. Install the LRAT_UpdateUtility.exe on your PC.
  2. Connect the LinkRunner AT 2000 to the PC via the mini-USB port.
  3. Power on the LinkRunner. It should appear as a new device in Device Manager.
  4. Launch the utility, select the correct COM port, and load the .bin file.
  5. Click “Update” and wait for the progress bar to reach 100%.

Step 2: Establish Communication

  1. Power on the LinkRunner AT 2000.
  2. Connect the USB cable to the PC.
  3. Open Windows Device Manager.
  4. Look under "Ports (COM & LPT)". You should see "LinkRunner AT" or a "USB Serial Port" with a specific COM number (e.g., COM3).
    • Troubleshooting: If you see a yellow exclamation mark ("Unknown Device"), you must manually install the drivers (covered in Section 5).