Msds Nalco 2000 May 2026

Nalco 2000 is a chemical product that was widely used in various industries, including water treatment, paper mills, and textile manufacturing. The product was a type of polymer-based flocculant, designed to help remove impurities and contaminants from wastewater and other industrial processes.

As a widely used chemical, Nalco 2000 had a Material Safety Data Sheet (MSDS) that outlined its composition, hazards, and safe handling procedures. The MSDS for Nalco 2000 would have included information on the product's physical and chemical properties, as well as potential health and environmental hazards associated with its use.

In the early 2000s, Nalco 2000 was a popular choice among industries due to its effectiveness in removing impurities and contaminants from wastewater. However, as concerns about environmental and human health impacts grew, the use of Nalco 2000 began to face scrutiny.

Some of the potential hazards associated with Nalco 2000, as outlined in its MSDS, included skin and eye irritation, respiratory problems, and environmental toxicity. The product contained polymers and other chemicals that could harm aquatic life if not disposed of properly.

Despite these concerns, Nalco 2000 remained a widely used product in many industries. However, as regulations and safety standards evolved, many companies began to seek out alternative products that were safer and more environmentally friendly.

Today, the use of Nalco 2000 has largely been phased out in favor of more sustainable and safer alternatives. However, for those who worked with the product in the past, the MSDS for Nalco 2000 serves as an important reminder of the importance of safe handling and responsible chemical management.

Some key points that might be included in an MSDS for Nalco 2000 are:

This guide summarizes the Safety Data Sheet (SDS) for Nalco 2000 (also known as Nalcool 2000), a corrosion inhibitor and scale suppressant used primarily in closed-loop cooling systems, such as diesel engines. 1. Product Identification & Composition

Nalco 2000 is a dark red, odorless liquid. It is alkaline, with a pH typically between 11.1 and 11.8. Key Active Ingredients:

Sodium Nitrite: Acts as a corrosion inhibitor but is toxic if ingested.

Sodium Tetraborate & Sodium Metasilicate: Provide alkalinity and further corrosion protection.

Sodium Mercaptobenzothiazole: An additional additive for metal protection. 2. Hazard Identification Nalco 2000 is classified as Harmful and an Irritant. SAFETY DATA SHEET NALCOOL® 2000

Material Safety Data Sheet (MSDS) for Nalco 2000

Introduction: Nalco 2000 is a water treatment chemical product manufactured by Ecolab Inc. It is used for various water treatment applications, including corrosion inhibition, scale inhibition, and as a biocide. The following MSDS provides information on the safe handling, use, storage, and disposal of Nalco 2000.

Product Information:

Hazard Identification:

Composition/Information on Ingredients:

First Aid Measures:

Fire Fighting Measures:

Accidental Release Measures:

Handling and Storage:

Exposure Controls/Personal Protection:

Physical and Chemical Properties:

Stability and Reactivity:

Toxicological Information:

Ecological Information:

Disposal Considerations:

Transport Information:

Regulatory Information:

Other Information:

Understanding the MSDS for NALCOOL 2000: A Comprehensive Safety and Application Guide

The NALCOOL 2000 Safety Data Sheet (SDS), formerly known as a Material Safety Data Sheet (MSDS), provides critical information for the safe handling, storage, and application of this specialized engine cooling treatment. Manufactured by companies like Nalco Water (an Ecolab company) and Wilhelmsen, NALCOOL 2000 is a nitrite-based corrosion inhibitor designed specifically for closed cooling systems, particularly in diesel engines. 1. Product Identification and Core Hazards

NALCOOL 2000 is primarily classified as an irritant and harmful substance. It is a dark red liquid with a slight organic odour, featuring a high pH (typically 11.1–11.8), making it mildly alkaline. Primary Hazards identified in the SDS: msds nalco 2000

Skin and Eye Irritation: Direct contact can cause redness, pain, and moderate to serious irritation.

Ingestion Toxicity: Harmful if swallowed. It contains sodium nitrite, which can lead to methemoglobinemia, a condition that reduces the blood's ability to carry oxygen, potentially causing cyanosis or death.

Aquatic Toxicity: The product is harmful to aquatic life; spills must be contained to prevent environmental damage. 2. Chemical Composition

The effectiveness of NALCOOL 2000 as a corrosion inhibitor comes from its specific chemical blend: SAFETY DATA SHEET NALCOOL 2000

Nalcool 2000 (often referred to as Nalco 2000) is a chemical corrosion inhibitor designed for closed cooling water systems, particularly in diesel engines. The Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), provides critical information on its hazardous chemical composition, safe handling protocols, and emergency response measures. irp.cdn-website.com Chemical Composition and Hazard Identification

Nalcool 2000 is primarily composed of several active hazardous ingredients that provide its anti-corrosive properties: Sodium Nitrite (1–5% or up to 10%):

A potent corrosion inhibitor that is toxic if swallowed and can cause serious blood system disorders like methemoglobinemia. Sodium Tetraborate (Borate):

Used for pH buffering; exposure can cause skin and eye irritation. Sodium Metasilicate:

An alkaline compound that contributes to the high pH of the product (typically 11.1–11.8 ) and is corrosive to skin and eyes. Sodium Mercaptobenzothiazole: Often included to protect yellow metals like copper. irp.cdn-website.com Globally Harmonized System (GHS) , Nalcool 2000 is classified with a signal word. It is categorized as a Skin Irritant (Category 2) Serious Eye Irritant (Category 2A) irp.cdn-website.com Emergency Response and First Aid Nalcool 2000 SDS outlines immediate actions required in case of exposure: irp.cdn-website.com NALCOOL 2000 | Hatenboer-Water

This informative overview summarizes the safety and technical profile for NALCOOL® 2000 Go to product viewer dialog for this item.

, a widely used cooling water treatment manufactured by Nalco Water (an Ecolab company). Product Overview Nalco 2000

is a liquid chemical blend primarily used as a corrosion inhibitor and scale suppressant in closed cooling systems, particularly for diesel engines. Its red, odorless formulation creates a protective film to prevent cavitation, liner pitting, and mineral scale buildup. Key Chemical Composition

According to Safety Data Sheets (SDS), the product is an aqueous solution containing several hazardous alkaline salts:

Sodium Nitrite (approx. 4–10%): The primary active inhibitor.

Sodium Tetraborate: Used for pH buffering and corrosion control.

Sodium Metasilicate: Provides aluminum protection and alkalinity. Nalco 2000 is a chemical product that was

Sodium Mercaptobenzothiazole: Specific yellow-metal (copper/brass) inhibitor. Hazard Identification

The Global Harmonized System (GHS) classifies this product as Harmful and an Irritant. SAFETY DATA SHEET NALCOOL® 2000

This report summarizes critical safety and handling data for NALCOOL® 2000 (often referred to as Nalco 2000

), a liquid corrosion inhibitor and cooling water treatment chemical manufactured by Nalco/Ecolab. Product Overview

Primarily used as a diesel engine corrosion inhibitor and for closed-system cooling water treatment. Manufacturer: Nalco Water (an Ecolab Company) Hazard Identification Nalco 2000 is classified under GHS as a hazardous mixture. irp.cdn-website.com Skin/Eye Irritation:

Classified as Category 2 (Skin) and Category 2A (Eye). Direct contact causes redness, pain, and serious irritation. Specific Toxicity:

May cause damage to organs (specifically blood/methemoglobinemia) if swallowed. Ingestion:

Ingestion of sodium nitrite can lead to cyanosis and potentially fatal outcomes in large doses. Reproductive Hazard:

Some data sheets indicate it may damage fertility or the unborn child (H360). irp.cdn-website.com Safety Data Sheets - SDS - MSDS - Ecolab

I searched for a specific paper or document titled "MSDS Nalco 2000", but I could not find a directly published academic or peer-reviewed paper with that exact name. Instead, “MSDS Nalco 2000” typically refers to the Material Safety Data Sheet for Nalco 2000 series chemicals (e.g., Nalco 2000 coagulant or flocculant, often a coagulant aid for water treatment).

Here’s the most useful, practical information for your research:

USEFUL SAFETY SUMMARY – NALCO 2000 SERIES

(Cooling Water Corrosion & Scale Inhibitor)

Section 7: Handling and Storage

Handling:

Storage:

Section 5: Firefighting Measures

Nalco 2000 is an aqueous solution, so it is not inherently flammable. However, if the water evaporates in a fire, the organic residue can burn.

Loading...