Mt6768 Scatter File _top_ | 2027 |

An MT6768 scatter file is a text-based configuration file used by Mediatek's SP Flash Tool to map out the partition layout of a device's internal eMMC or UFS storage. It acts as a blueprint, telling the flashing software exactly where each component of the firmware (like the preloader, boot, and system images) should be written in the device's memory. Key Technical Details MT6768 Scatter File Configuration | PDF - Scribd

---

Error 1: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)

Cause: USB driver mismatch or missing DA_SWSEC.bin for MT6768. Fix:

• Use SP Flash Tool v5.2112+ (includes MT6768 DA file).
• Copy MTK_AllInOne_DA.bin from the firmware folder to SP Flash Tool folder.
• In Options → Download → DA File Path, select the correct DA.

Scenario 4: Extracting or Backing Up Stock Firmware

Using SP Flash Tool’s “Read Back” feature, you can dump the entire flash memory. The scatter file tells the tool where to start and stop reading for each partition.

---

Key partitions commonly present for MT6768 devices

• PRELOADER — bootloader code for initial hardware initialization.
• MBR / EBR — partition table records.
• UBOOT — secondary bootloader (LK/u-boot).
• BOOT / RECOVERY — kernel + ramdisk images for normal or recovery boot.
• SYSTEM — Android system image (read-only, large).
• VENDOR — vendor-supplied system components (on Treble devices).
• LOGO — boot splash.
• USERDATA — user data and app storage (wiped on factory reset).
• CACHE — temporary storage.
• FACTORY or FOTADATA — firmware-over-the-air or factory settings.
• MD1IMG/MD1DSP — cellular modem firmware partitions (if present).
• CUSTOM or OTHER — device-specific partitions (e.g., persist, nvram, metadata).

Scenario 2: Bypassing FRP (Factory Reset Protection)

Some bypass methods require writing a modified nvdata or persist partition. Without the correct scatter file, you cannot target those partitions individually.

Contents of an MT6768 Scatter File

When you open a typical MT6768_Android_scatter.txt file in a text editor, you’ll see a structured partition list. Below is a simplified example: mt6768 scatter file

- partition_index: 0
  partition_name: preloader
  file_name: preloader_mt6768.bin
  physical_start_addr: 0x0
  region: EMMC_BOOT_1


partition_index: 1
partition_name: pgpt
file_name: N/A
physical_start_addr: 0x0
region: EMMC_USER


partition_index: 2
partition_name: proinfo
file_name: proinfo.img
physical_start_addr: 0x8000
region: EMMC_USER


partition_index: 3
partition_name: nvram
file_name: nvram.img
physical_start_addr: 0x180000
region: EMMC_USER


partition_index: 4
partition_name: boot
file_name: boot.img
physical_start_addr: 0x1E00000
region: EMMC_USER An MT6768 scatter file is a text-based configuration


partition_index: 5
partition_name: recovery
file_name: recovery.img
physical_start_addr: 0x2A00000
region: EMMC_USER


partition_index: 6
partition_name: system
file_name: system.img
physical_start_addr: 0x5600000
region: EMMC_USER


... (more partitions like vendor, cust, userdata, etc.)

Title

Inside the MT6768 Scatter File: What it Is, How to Use It, and Tips for Safe Bootloader Work

The Header Section

# General Setting
- general: MTK_PLATFORM_CFG
  info: 
    - config_version: V1.1.2
    - platform: MT6768
    - project: k65v1_64_bsp
    - storage: EMMC
    - boot_channel: MSDC_0
    - block_size: 0x20000

Key Parameters Explained:

• storage: EMMC : The chip uses eMMC protocol (not UFS). This dictates the linear addressing mode.
• block_size: 0x20000 : This is 128KB (131,072 bytes). The scatter file addresses are multiples of this block size.
• boot_channel: MSDC_0 : This refers to the primary MMC controller (usually internal eMMC).

Part 1: What is the MT6768 Chipset?

Before diving into the scatter file, understanding the silicon it serves is essential.

The MediaTek MT6768 (also known as the Helio P65) is an octa-core 64-bit ARM SoC fabricated on a 12nm process. Key specifications include: Use SP Flash Tool v5

• CPU: 2x Cortex-A75 cores @ 2.0GHz + 6x Cortex-A55 cores @ 1.7GHz
• GPU: ARM Mali-G52 MC2 @ 820MHz
• Modem: 4G LTE (Cat-13 downlink)
• Memory: eMMC 5.1 storage, LPDDR4x RAM

Unlike Qualcomm devices that use raw partitions and gpt files, MediaTek devices rely heavily on a preloader and a DA (Download Agent). The scatter file acts as an intermediary to prevent the DA from writing data to the wrong physical address.

---