El imagotipo representa un Smartphone con piernas y brazos, caminando, con una lupa en una mano y con gafas de sol.
La pantalla del Smartphone incluye cuadrados dentro que representan la distribución habitual del menú de apps.
Debajo de este icono o personaje, se incluye el nombre del proyecto 'BuscaApps', seguido de un pequeño subtitulo que dice: 'Encuentra apps accesibles para todos'
The Nalco 8506 Plus Safety Data Sheet (SDS), formerly known as a Material Safety Data Sheet (MSDS), is a crucial document for industrial facilities using this cooling water biodetergent. It outlines the chemical’s composition, hazards, and safety protocols necessary for maintaining efficient, foul-free cooling systems while ensuring worker safety. Product Overview and Applications
Nalco 8506 Plus is a high-performance biodetergent specifically designed for open recirculating cooling systems subject to high-stress conditions. Unlike primary biocides, biodetergents like 8506 Plus act by dispersing oils, hydrocarbons, and silt, which prevents the formation of biofilms and helps keep heat exchanger surfaces clean. Key benefits of using Nalco 8506 Plus include:
Heat Transfer Efficiency: Prevents fouling to maintain optimal heat exchange.
Microbiological Control: Enhances the effectiveness of biocides by penetrating slime and silt deposits where microorganisms thrive.
Maintenance Cost Reduction: Prevents microbial-induced corrosion and expensive mechanical cleanings.
Regulatory Compliance: It is NSF Registered under category codes G5 and G7, making it acceptable for use in and around food processing areas provided there is no direct contact with edible products. Chemical Composition
The effectiveness of Nalco 8506 Plus is derived from its surfactant-based formulation. According to the GHS Safety Data Sheet, its primary active ingredients include:
Alcohols, C12-15, ethoxylated (10% – 30% concentration): A surfactant used for its cleaning and dispersing properties.
Sodium Xylenesulfonate (5% – 10% concentration): Acts as a hydrotrope to keep the formula stable and enhance its solvency. Physical and Chemical Properties Appearance: Clear to light yellow liquid. pH (Neat): Approximately 7.2 (Neutral). Relative Density: 1.0675 at 20°C.
Flash Point: >100°C (>212°F), indicating it is not classified as a flammable liquid under standard handling. Viscosity: 147.5 mPa.s at 20°C. Hazard Identification and First Aid
Nalco 8506 Plus is classified as a hazardous substance because it can cause serious eye damage. Route of Exposure Potential Health Effect First Aid Measure Eye Contact Causes serious eye damage and irritation.
Rinse immediately with water for at least 15 minutes. Seek immediate medical attention. Skin Contact
Can cause moderate irritation; prolonged contact may cause dermatitis. Wash off with soap and plenty of water. Ingestion May cause nausea, dizziness, or vomiting. Rinse mouth. Seek medical attention if symptoms occur. Inhalation High concentrations may cause dizziness or stupor. Remove to fresh air. Treat symptomatically. Safe Handling and Materials Compatibility
Because Nalco 8506 Plus is a concentrated chemical, proper storage and equipment selection are vital.
Personal Protective Equipment (PPE): Workers should always wear safety goggles, face shields, and chemical-resistant gloves (rubber or nitrile) when handling the neat product.
Compatible Materials: Storage tanks, pumps, and lines should be constructed from PVC, Polyethylene (PE), Teflon, or Stainless Steel.
Materials to Avoid: Do not use aluminum, brass, or carbon steel in direct contact with the undiluted product, as it may cause degradation or corrosion of these metals. Environmental and Disposal Considerations
While Nalco 8506 Plus is designed to improve water system sustainability by reducing water and energy waste, the concentrated product must be handled carefully. If spilled, it should be contained and disposed of according to local, state, and federal regulations. It may meet the criteria for hazardous waste under the Resource Conservation and Recovery Act (RCRA) depending on its concentration and state.
For the most up-to-date and official safety documentation, you can request a specific copy of the MSDS/SDS through the Ecolab SDS Request Portal. NALCO 8506 PLUS Safety Data Sheet | PDF | Toxicity - Scribd
The safety and technical profile of Nalco 8506 Plus (also known as NALCO® 8506 PLUS) identifies it as a liquid biodetergent used primarily for microbiological control in industrial cooling systems Chemical Composition & Hazards Based on its Safety Data Sheet (SDS) , the product contains: Alcohols, C12-15, ethoxylated (10–30% concentration): A surfactant. Sodium Xylenesulfonate (5–10% concentration): Used as a hydrotrope. Key Hazards:
The substance is classified as a potential irritant. Direct contact can cause moderate irritation
to the eyes and skin. Inhalation of high concentrations may cause dizziness, nausea, or central nervous system depression. files.dep.state.pa.us Technical Specifications Appearance : Clear, light yellow liquid. : Approximately 7.2 (neutral). Flash Point nalco 8506 plus msds
: > 100°C (> 212°F), making it stable under normal conditions. : 1.0675 at 20°C. Primary Uses & Compatibility Application
: It is designed for open recirculating cooling systems to prevent fouling and microbial corrosion. Performance
: Improves biocide penetration into silt deposits and effectively disperses oils and hydrocarbons. Material Compatibility Recommended : PVC, Polyethylene (PE), Teflon, and Stainless Steel.
: Contact with Aluminum, Brass, or Carbon steel when the product is neat (undiluted). Food Processing NSF Registered
(Category G5, G7) for use in and around food processing areas, provided there is no direct contact with edible products. Handling & Storage Safety Gear : Use goggles and rubber gloves during handling.
: Keep containers tightly closed in a cool, well-ventilated area.
: It may be considered hazardous waste (RCRA 40 CFR 261) and should be disposed of at licensed facilities.
For official, site-specific documents, you can request a formal Nalco Water SDS directly from dosage recommendations for specific cooling system volumes or looking for alternative biodetergents 8506 SDS (GHS) | PDF | Toxicity | Magnesium - Scribd
Introduction
NALCO 8506 PLUS is a chemical product manufactured by Ecolab Inc. (formerly Nalco Inc.). The Safety Data Sheet (SDS) provides critical information on the safe handling, use, storage, and disposal of this product.
SDS Overview
The SDS for NALCO 8506 PLUS is a document that provides information on the product's:
Detailed Information
Here is a detailed breakdown of the SDS for NALCO 8506 PLUS:
Section 1: Identification
Section 2: Hazards
Section 3: Composition
Section 4: First Aid Measures
Section 5: Fire-Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
Section 8: Exposure Controls/Personal Protection
Section 9: Physical and Chemical Properties
Section 10: Stability and Reactivity
Conclusion
The SDS for NALCO 8506 PLUS provides critical information on the safe handling, use, storage, and disposal of this product. It is essential to read and understand the SDS before working with this product. If you have any questions or concerns, please consult the manufacturer or a qualified safety professional.
Recommendations
By following the guidelines and recommendations outlined in this guide, you can help ensure a safe and healthy work environment when working with NALCO 8506 PLUS.
NALCO 8506 PLUS is a cooling water biodetergent designed to maintain heat transfer efficiency and prevent fouling in open recirculating cooling systems. While the full proprietary Safety Data Sheet (SDS/MSDS) must be obtained directly from Nalco Water (Ecolab), the following safety and technical report is compiled from official registration data and product bulletins. Product Overview
Primary Function: Prevents microbiological growth, disperses oils and hydrocarbons, and improves biocide penetration into slime and silt deposits.
Applications: Designed for open recirculating cooling systems experiencing high-stress conditions.
Certifications: Achieved NSF International Registration (Category Code G5, G7), making it acceptable for treating cooling and retort water in and around food processing areas. Hazard Identification
Based on standard hazard characterizations for this product line: Human Hazard Potential: Classified as MODERATE.
Primary Risks: May cause skin and eye irritation. It is not expected to be flammable but may evolve toxic fumes (such as oxides of nitrogen) under fire conditions. Handling and Safety Requirements
Personal Protective Equipment (PPE): Standard precautions require the use of goggles and rubber gloves when handling the neat product. Material Compatibility:
Recommended: PVC, PE, Teflon, or Stainless Steel for storage and application equipment.
Avoid: Do NOT use Aluminum, Brass, or Carbon steel in contact with the neat product.
Storage: Store in original, tightly closed containers in a cool, dry place. Avoid freezing. First Aid Measures
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes; seek medical attention if irritation persists. Skin Contact: Wash thoroughly with soap and water. Inhalation: Move to fresh air.
Ingestion: Do NOT induce vomiting. Rinse mouth and consult a physician immediately. Physical & Chemical Properties Form: Liquid Color: Clear, light yellow to amber Density: ~7.0 lbs/gal Specific Gravity: 0.84 @ 77°F Flash Point: ~197°F (PMCC) NALCO 8506PLUS Cooling Water Biodetergent | PDF - Scribd
You're looking for a guide related to the Safety Data Sheet (SDS) for "Nalco 8506 Plus". Here's some general information and a step-by-step guide on how to find and understand the SDS:
What is Nalco 8506 Plus? Nalco 8506 Plus is a product from Ecolab, a company that provides cleaning and sanitation solutions for various industries. The specific product is likely a water treatment or process chemical. The Nalco 8506 Plus Safety Data Sheet (SDS),
What is an SDS (Safety Data Sheet)? An SDS is a document that provides critical information on the safe handling, use, storage, and disposal of a chemical product. It includes information on hazards, first aid measures, fire-fighting measures, and environmental data.
How to find the SDS for Nalco 8506 Plus:
Understanding the SDS:
Once you've obtained the SDS, here are some key sections to review:
NALCO 8506 PLUS is a cooling water biodetergent designed to improve the penetration of biocides into slime and silt deposits while effectively dispersing oils and hydrocarbons. Quick Hazard Profile Based on standard Safety Data Sheets (SDS)
, the product is generally stable but requires careful handling: Physical Form: Characteristic liquid with a pH of roughly 7.2. Flammability: Generally low hazard (Flash point > 100°C). Primary Hazards:
Warning! Causes irritation to skin and eyes. Prolonged inhalation of vapors may be harmful. Ingestion:
May cause central nervous system depression, nausea, or dizziness. Material Compatibility
To avoid corrosion or chemical reactions, use the following materials for storage and application: Recommended: PVC, Polyethylene (PE), Teflon, or Stainless Steel. DO NOT USE:
Aluminum, Brass, or Carbon Steel in contact with the neat (undiluted) product. Safety & Personal Protection Personal Protective Equipment (PPE):
Use goggles, face shields, and rubber gloves during handling. If splash hazards exist, use full body protection.
Wash hands and any exposed skin thoroughly after handling. Remove and wash contaminated clothing before reuse. Ventilation:
Use only with adequate ventilation; avoid repeated breathing of vapors. Official Documentation & Compliance NSF Registration:
This product is acceptable for treating boilers, steam lines, and cooling systems (Category G7) where neither the treated water nor steam contacts edible products. Accessing Full SDS:
Ecolab/Nalco Water often requires a direct request for the most recent official SDS. You can use the Ecolab SDS Request Form to obtain a localized version for your region. NALCO 8506PLUS Cooling Water Biodetergent | PDF - Scribd
NALCO 8506 PLUS is a non-oxidizing liquid biodetergent used primarily in industrial cooling water systems to prevent and remove biological fouling. While Nalco Water (an Ecolab company) generally does not provide Safety Data Sheets (SDS) for public download online, they can be requested directly through the Nalco Water SDS Portal Draft Technical Summary (Based on Available SDS Data)
The following information is compiled from available safety documentation for NALCO 8506 PLUS Physical Properties Appearance : Yellow-brown liquid. : Approximately 7.2 (neutral). Relative Density : 1.0675 at 20 °C. Solubility : Miscible in water. Flash Point : > 100 °C (Combustible at high temperatures). Hazard Identification Skin/Eye Contact
: Causes moderate irritation. Avoid direct contact and wear protective goggles and gloves. Inhalation
: Prolonged inhalation of vapors may be harmful; use only with adequate ventilation.
: Can cause central nervous system depression, nausea, or dizziness. Regulatory & Safety NSF Registration : Certified under Category Code
for treatment of cooling and retort water in food processing areas, provided there is no direct food contact. Identification : Product name, synonyms, and CAS number
: Stable under normal conditions; avoid storing near strong acids. How to Obtain the Official MSDS 8506 SDS (GHS) | PDF | Toxicity | Magnesium - Scribd
Note: In modern global standards, MSDS is now often referred to as SDS (Safety Data Sheet), but the core content remains the same. The following is a general guide based on typical industrial water treatment chemicals; actual documents must be obtained directly from Nalco Water (Ecolab).
Si conoces recursos útiles para esta app, o alguno de sus enlaces no están operativos, puedes aportar información actualizada.
