Nitocote Nt402 Msds Verified

Nitocote NT402 is classified as hazardous due to its chemical components. Key hazards include:

Skin & Eye Irritation: Causes skin irritation (H315) and serious eye irritation (H319). Sensitization: May cause an allergic skin reaction (H317).

Toxicity: Suspected of damaging fertility or the unborn child (H360). Respiratory: May cause respiratory irritation (H335).

Environmental: Very toxic to aquatic life with long-lasting effects (H410). 2. Composition / Hazardous Ingredients

Base: Contains epoxy resins and 1,4-butanediol diglycidyl ether.

Hardener: Contains O,O'-Bis(2-aminopropyl)polypropyleneglycol, Nonylphenol, and Triethylenetetramine. 3. First Aid Measures Exposure Route Skin Contact

Remove contaminated clothing and wash skin thoroughly with soap and water. Do not use solvents. Eye Contact

Rinse cautiously with water for at least 15 minutes, removing contact lenses if present. Seek immediate medical attention. Inhalation

Move affected person to fresh air and keep at rest in a comfortable breathing position. Ingestion

Do not induce vomiting. Rinse mouth with water and seek medical attention immediately. 4. Handling and Storage

Personal Protection: Wear suitable protective clothing, chemical-resistant gloves, and eye/face protection. nitocote nt402 msds

Ventilation: Use only in well-ventilated areas to avoid inhalation of vapors.

Storage: Store in original, tightly closed containers in a cool, dry place. Nitocote NT402 is non-flammable, though related primers (like Nitoprime 25) may be flammable. 5. Technical Properties & Application

According to the Nitocote NT402 Product Data Sheet, the coating has the following properties: Solids Content: 100% (solvent-free). Specific Gravity: 1.35 g/cm³ at 23°C. Pot Life: 45 minutes at 23°C; 20 minutes at 35°C.

Cure Time: Tack-free in 2–3 hours; full cure in 4 days at 23°C.

Application: Generally applied in two coats at a wet film thickness (WFT) of 200 microns per coat.

Nitocote NT402 Base Safety Data Sheet | PDF | Toxicity - Scribd

Material Safety Data Sheet (MSDS) for Nitocote NT402

Introduction: Nitocote NT402 is a high-performance coating product designed for industrial applications. As a responsible manufacturer, we provide this Material Safety Data Sheet (MSDS) to ensure the safe handling, use, storage, and disposal of this product. This MSDS is intended to provide critical information to users, employers, and workers to minimize exposure to potential hazards associated with Nitocote NT402.

Product Identification:

• Product Name: Nitocote NT402
• Product Code: NT402
• Synonyms: Not applicable
• CAS Number: Not applicable
• Supplier: [Name of supplier]

Hazards Identification: Nitocote NT402 may pose health and safety risks if not handled properly. The product contains chemical substances that can cause irritation, allergic reactions, or other adverse health effects. Potential hazards associated with Nitocote NT402 include: Nitocote NT402 is classified as hazardous due to

• Skin and eye irritation
• Respiratory tract irritation
• Allergic reactions
• Flammability

Composition/Information on Ingredients: The exact composition of Nitocote NT402 is proprietary information. However, the product contains a mixture of the following substances:

• [List of ingredients, including their concentrations and CAS numbers]

First Aid Measures: In case of exposure to Nitocote NT402, follow these first aid measures:

• Skin Contact: Wash affected area with soap and water. Remove contaminated clothing. Seek medical attention if irritation persists.
• Eye Contact: Flush eyes with water for at least 15 minutes. Seek medical attention if irritation persists.
• Inhalation: Move to fresh air. Seek medical attention if respiratory irritation occurs.
• Ingestion: Seek medical attention immediately.

Fire-Fighting Measures: In case of a fire involving Nitocote NT402, use:

• Extinguishing Media: Water, foam, dry chemical, or carbon dioxide
• Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.

Accidental Release Measures: In case of an accidental release of Nitocote NT402, follow these procedures:

• Spill Response: Contain and collect spilled material. Dispose of waste according to regulations.
• Precautions: Wear protective clothing and equipment.

Handling and Storage: To ensure safe handling and storage of Nitocote NT402:

• Handling: Handle with care. Avoid skin and eye contact. Use in well-ventilated areas.
• Storage: Store in a cool, dry, and well-ventilated area. Keep away from ignition sources.

Exposure Controls/Personal Protection: To minimize exposure to Nitocote NT402:

• Engineering Controls: Use ventilation systems to control airborne concentrations.
• Personal Protective Equipment (PPE): Wear protective clothing, gloves, safety glasses, and a respirator when handling Nitocote NT402.

Physical and Chemical Properties: Nitocote NT402 has the following physical and chemical properties:

• Appearance: [Describe appearance, e.g., color, viscosity]
• Boiling Point: [Value]
• Melting Point: [Value]
• Flash Point: [Value]

Stability and Reactivity: Nitocote NT402 is stable under normal conditions. However, it may react with:

• Incompatible Materials: [List of incompatible materials]
• Conditions to Avoid: [List of conditions to avoid]

Toxicological Information: Nitocote NT402 may cause adverse health effects if not handled properly. Potential health effects include:

• Acute Toxicity: [LD50 or LC50 values]
• Chronic Toxicity: [Information on chronic toxicity]

Ecological Information: Nitocote NT402 may affect the environment if released. Potential ecological effects include: Product Name: Nitocote NT402 Product Code: NT402 Synonyms:

• Aquatic Toxicity: [Information on aquatic toxicity]
• Terrestrial Toxicity: [Information on terrestrial toxicity]

Disposal Considerations: Dispose of Nitocote NT402 and its waste according to regulations and guidelines.

Transport Information: Nitocote NT402 is subject to regulations for transportation:

• UN Number: [Value]
• Proper Shipping Name: [Value]
• Hazard Class: [Value]

Regulatory Information: Nitocote NT402 complies with regulations and standards:

• OSHA: [Information on OSHA compliance]
• EPA: [Information on EPA compliance]

Other Information: Additional information on Nitocote NT402 is available upon request.

This MSDS is provided as a guide for users, employers, and workers to ensure the safe handling, use, storage, and disposal of Nitocote NT402. It is the responsibility of users to ensure that they are aware of the hazards associated with this product and take necessary precautions to prevent adverse effects.

Nitocote NT402 — Safety Data Summary

Composition & ingredients (examples — verify on actual SDS)

Common ingredients in coatings like Nitocote NT402 may include:

• Epoxy resins or reactive polymers
• Isocyanates or curing agents (if two-component)
• Organic solvents (xylene, toluene, white spirit, acetone, etc.)
• Pigments and fillers (metal oxides) Exact components and concentrations must be taken from the manufacturer SDS.

13. Ecological Information

• Fish toxicity (LC50): 10–100 mg/L (harmful to aquatic life)
• Persistence: Partially biodegradable. Amine components may persist in water.
• Bioaccumulation: Low.
• Ecological note: Do not discharge into water without treatment. Meets H411 classification.

10. Physical & Chemical Properties

| Property | Value | |----------|-------| | Appearance | Viscous liquid | | Odor | Slight amine-like (Part B) | | pH (mixed) | ~9–10 (alkaline) | | Viscosity (mixed) | 750–1000 cP | | Density | ~1.10–1.20 g/cm³ | | Solubility in water | Miscible (water-based system) | | VOC content | <50 g/L (low VOC) |

General Information

• Product Identifier: Nitocote NT402
• Supplier: [Name of the supplier]
• Product Use: Coating or lining for industrial applications, likely for corrosion protection.

12. Toxicological Information (Key extracts)

| Route | Effect | |-------|--------| | Acute oral toxicity | Low (LD50 >2000 mg/kg, rat) | | Skin corrosion | Part B – Causes severe irritation and burns | | Skin sensitization | Positive – Can cause allergic contact dermatitis (epoxy and amine sensitivity) | | Eye damage | Part B – Irreversible damage possible | | Carcinogenicity | Not classified (no IARC/NTP listing for final product) |

Important: Repeated overexposure to epoxy resins and amine hardeners can lead to “epoxy sensitization” – a lifelong allergic reaction. Strict PPE is mandatory.

18. Where to Obtain the Official MSDS

The MSDS is a legally required document from the supplier, not a third-party summary. Always download the current version from:

• Fosroc’s official website (Product → Nitocote NT402 → Downloads → SDS)
• Your local Fosroc distributor
• Construction chemical databases (e.g., NBS Source, SpecifiedBy)

Disclaimer: This feature is a summary for informational and training purposes only. It does not replace the official, region-specific MSDS issued by Fosroc. Always consult the current, legally compliant MSDS before handling, storing, or using Nitocote NT402.

End of Feature