Understanding the Error: "This Config Does Not Support the Provided Better" in OpenBullet
If you are a web penetration tester or a developer using OpenBullet 1 or OpenBullet 2, you have likely encountered the frustrating error message: "This config does not support the provided better."
While the phrasing might seem like a typo in the software's UI, it is actually a specific compatibility error. This usually occurs when there is a mismatch between your Proxies, your Environment Settings, or the Config’s Logic.
In this guide, we will break down exactly why this happens and how to fix it so you can get your runner back online. What Does This Error Actually Mean?
In OpenBullet terminology, a "Better" (often a shorthand or typo in the source code for "Bypasser" or "Browser") refers to the engine used to process the request.
The error message essentially says: "The instructions written in this config are incompatible with the way you are trying to run them." Common Causes:
Selenium vs. HTTP: The config was written for the Selenium (browser-based) engine, but you are trying to run it using the standard Requests (HTTP-based) engine.
Missing Global Settings: The config requires specific "Puppeteer" or "Selenium" components that aren't enabled in your OpenBullet global settings.
Proxy Mismatch: You are trying to use a specific type of proxy (like SOCKS5) with a config that explicitly requires HTTP proxies or no proxies at all.
OpenBullet Version Conflict: You are trying to run an OpenBullet 1 (.loli) config in OpenBullet 2 (.opbk) without proper conversion.
How to Fix "This Config Does Not Support the Provided Better" 1. Check the Config Type (Selenium vs. Requests) Open the config in the Stacker or Editor.
If you see blocks labeled S_ (e.g., S_GET, S_CLICK), this is a Selenium config.
To run these, you cannot just hit "Start." You must ensure that you have the correct WebDriver (Chrome or Firefox) installed and selected in your Runner settings.
The Fix: Go to your Runner setup and ensure the "Bot Type" matches what the config was designed for. 2. Update Your Global Environment
Sometimes the config references a "Global Constant" that your local version of OpenBullet doesn't recognize. Go to Settings > Environment. Ensure that the "Runtimes" are up to date. openbullet this config does not support the provided better
If you are using a community-made config, check if it requires a specific OpenBullet Mod (like Anomaly or SilverBullet). Many custom configs use "Better" features only available in these modified versions. 3. Proxy Settings Adjustment
If the config has a hardcoded requirement for a certain proxy type, it will reject any "Better" (provider) that doesn't match.
Try toggling the Proxies button to "OFF" to see if the config runs on your home IP.
If it works without proxies, the issue lies in your Proxy List format or the Proxy Provider settings in OpenBullet. 4. Re-import the Config
If you recently updated OpenBullet, the config file might be corrupted or in an old format. Delete the config from your list. Restart OpenBullet. Re-import the .loli or .opbk file. Pro-Tip for OpenBullet 2 Users
If you are seeing this in OpenBullet 2, it is often related to the Puppeteer or Browser engine. Make sure you have downloaded the browser binaries within the "Exploration" tab. Without the actual browser files, the "Better" (the engine) cannot support the automated tasks scripted in the config.
The "Provided Better" error is almost always a compatibility mismatch. Step 1: Match the Engine (Requests vs. Selenium).
Step 2: Match the Software (Standard OB vs. SilverBullet/Anomaly). Step 3: Check your WebDriver/Browser binaries.
By aligning these three elements, you should be able to resolve the error and resume your security testing.
This article is written for technical users, security researchers, and novice automation users who encounter this cryptic error. It explains the meaning, the causes, and the solutions.
Config obfuscation has escalated. Modern OpenBullet forks (like OpenBullet 2, SilverBullet, and Ruri) now include config encryption and environment checks. Some configs will throw the “better” error deliberately if they detect a debugger, a sandbox, or an outdated version of the runner.
Why? Because config-selling is a business. Premium configs for services like Spotify, Amazon, or ChatGPT can cost $50–200 in crypto. Authors embed watermarks and variable requirements. If you leak the config without its accompanying better.txt wordlist, it’s useless. The error is DRM for data thieves.
OpenBullet is frequently misused for credential stuffing — testing stolen username/password pairs against other websites. That is illegal in most jurisdictions without explicit authorization from the site owner.
If you are not a security professional conducting an authorized penetration test, do not use OpenBullet against websites you do not own. Understanding the Error: "This Config Does Not Support
The "This config does not support the provided proxy" error in OpenBullet can seem daunting, but it's usually a straightforward issue to resolve by ensuring compatibility between your proxy type and config settings. By understanding the causes of this error and following the troubleshooting steps outlined in this article, you can quickly get back to testing your proxies. Additionally, optimizing your OpenBullet configurations can enhance performance and reduce the likelihood of encountering similar errors in the future. Whether you're a seasoned OpenBullet user or just starting out, staying informed about best practices and common issues is key to making the most out of this powerful tool.
Every OpenBullet configuration is designed to handle a specific type of data format (e.g., Email:Password or User:Password). If you try to run a configuration that expects Credentials with a wordlist set to Default, the program will block it to prevent parsing errors. ✅ How to Fix It
You can resolve this by aligning the wordlist types in both the configuration and the job setup: Step 1: Check the Config's Required Type
Go to the Config Manager and edit the configuration you are trying to use.
Navigate to the Settings tab, then find the General sub-tab.
Look for the Wordlist Type field (e.g., Credentials, Emails, or Cards). Take note of what is selected. Step 2: Update Your Wordlist in the Runner
Go to the Runner (or Job) where you are attempting to start the attack.
In the Wordlist section, ensure the "Type" dropdown matches exactly what you saw in the config settings.
If you haven't imported the wordlist with that type yet, go to the Wordlists tab and re-import it, selecting the correct type from the dropdown during the import process.
Step 3: Modify the Config (Alternative)If you know your wordlist is correct but the config is too restrictive: Edit the config as in Step 1.
Change the Wordlist Type to Default or the type that matches your data.
Save the config and re-select it in the Runner to refresh the settings. 💡 Quick Tips
Re-select the Config: If you change settings while a Runner is open, you often need to re-select the config from the list to apply the changes.
Environment.ini: If a specific type (like Credentials) is missing, you may need to add it to your Environment.ini file located in the OpenBullet root folder under Settings. The Arms Race
Config obfuscation has escalated
Does your wordlist follow the standard Email:Pass format, or are you using a custom data structure?
This error usually occurs because the Wordlist Type defined in the configuration (config) does not match the wordlist you are trying to use in the runner. Why this happens
In OpenBullet, configs are designed to process specific data formats (e.g., Email:Pass, User:Pass, or custom types like Credentials). If you try to run a config that only supports Credentials with a wordlist you've labeled as Email:Pass, the software blocks the job to prevent errors. How to fix it
You can resolve this by aligning the config settings with your wordlist:
Check Config Settings: Go to the Config Manager, select your config, and navigate to Other Options -> Data.
Enable Your Wordlist Type: In the "Allowed Wordlist Types" section, ensure the type of your wordlist (e.g., Default, Email:Pass) is selected.
Check Your Environment: Verify that the wordlist type exists in your Environment.ini file. If you are using a shared config, you might need to copy the Environment.ini settings that came with it.
Re-select in Runner: After saving your changes, go back to the Runner, re-select the config, and try starting the job again.
For more detailed troubleshooting, you can visit the OpenBullet 2 Documentation or the OpenBullet Support Forum.
What Wordlist Type is currently selected for your list in the runner?
I cannot produce a configuration file for OpenBullet or provide instructions to bypass software restrictions or licensing checks. I can, however, explain the technical concepts behind configuration files and how software compatibility is managed.
In OpenBullet (version 2+):
USERNAME, column 2 → PASSWORD, and map an empty column or a constant value to BETTER.OpenBullet configs (typically saved as .loli files) are script files containing a sequence of "Blocks" (e.g., REQUEST, PARSE, KEYCHECK, FUNCTION).
// Pseudo-code representation of the bug
throw new Exception($"This config does not support the provided block.Type");
block.Type was null, empty, or parsed as a variable named "better" (perhaps a remnant of a "BetterCap" plugin or a custom plugin name), the output becomes the error you are seeing.If the config is corrupt: