Pci 60806a Driver

PCI 60806A driver is primarily associated with legacy PCI parallel and serial port add-in cards

. These cards are used to add legacy communication ports (RS-232 or IEEE 1284) to modern computers that lack them, allowing for the connection of older printers or industrial equipment. Identity and Hardware Profile Device Type: Typically a multifunction I/O card. Associated Hardware IDs: Common identifiers for this driver class include PCI\VEN_4651&DEV_5073 PCI\VEN_4651&DEV_3273 Manufacturer Origins: Often linked to chipset manufacturers like (WinChipHead) or Common Usage Scenarios Legacy Connectivity:

Used to support devices like older dot-matrix printers or diagnostic equipment that require a dedicated parallel or serial interface. Specific PC Models: Historical association with systems like the Sony PCV-RS502 Driver Installation & Troubleshooting

If you have a "PCI Serial Port" or "PCI Simple Communications Controller" error in Device Manager, follow these steps: Check Hardware IDs: Right-click the device in Windows Device Manager Hardware Ids to confirm if it matches Intel Management Engine:

Sometimes, "PCI Serial Port" errors are actually related to the Intel Management Engine (ME) rather than an add-in card. Third-Party Sources: While some sites like DriverIdentifier pci 60806a driver

list the driver for older OS versions (XP through Windows 8), always prioritize the manufacturer's official support site if available (e.g., Dell Support for Foxconn cards).

Many "60806a" search results lead to unverified file-sharing sites or generic "driver update" tools; use caution and scan any downloaded files for malware. Are you trying to resolve a yellow exclamation mark in your Device Manager, and if so, what is the exact Hardware ID

Find Drivers for Devices Using a Hardware ID from Device Manager

PCI 60806A a chip commonly used in PCI Parallel Serial Port Adapter Cards PCI 60806A driver is primarily associated with legacy

(often marketed as "PCI to 2 RS232" or "PCI Multi-IO" controllers). These drivers are typically required for older Windows versions (XP, Vista, 7, 8) to enable communication between your computer and devices like printers or serial industrial equipment. www.espada-tech.ru Driver Identification & Hardware Details Hardware IDs : Common identifiers for this chip include PCI\VEN_4651&DEV_3273 PCI\VEN_4651&DEV_5073 Common Manufacturers : Cards using this chip are often produced by brands like (WinChipHead), Device Name in Device Manager

: It often appears as "MOSChip PCI Multi-IO Controller" or "PCI Serial Port" with a yellow warning icon if the driver is missing. www.espada-tech.ru How to Install the Driver Identify the Chip : Check the card for a chip labeled

or similar. WCH is a primary manufacturer for these 60806A-based controllers. Official Source : Visit the WCH (WinChipHead) official site to download the

driver package, which usually supports these PCI serial/parallel cards. Manual Installation Device Manager (right-click the Start button and select it). Restart PC while holding Shift → Troubleshoot →

Right-click the "PCI Serial Port" or "PCI Simple Communications Controller" with the yellow exclamation mark. Update driver Browse my computer for drivers

Point to the folder where you extracted the downloaded driver files. Third-Party Repositories

: If the manufacturer site is unavailable, generic drivers can be found on sites like DriverIdentifier DriverCloud , though official sources are safer. Safety Note

Be cautious when downloading from third-party sites; always scan files with tools like Malwarebytes before running them. Microsoft Learn Are you using a Windows 10/11 system, or is this for an older machine like Windows 7 or XP?

D. Disabling Driver Signature Enforcement (for older unsigned drivers)

For Windows 10/11, if a legacy driver refuses to install:

1. Restart PC while holding Shift → Troubleshoot → Advanced Options → Startup Settings → Restart.
2. Press 7 (Disable driver signature enforcement).
3. Install the driver immediately after boot.

2. The Role of the Driver

The driver acts as a translator between the SATA controller’s hardware language and the operating system’s storage subsystem. Without a correct driver:

• Connected hard drives or SSDs will not appear in “This PC.”
• The device may show a yellow exclamation mark in Device Manager under “Storage Controllers” or “Other Devices.”
• The system may fail to boot if the OS is installed on a drive connected to this card.

Building a plan to get the correct driver (practical steps)

1. Gather IDs: run lspci/Device Manager to get vendor/device and subsystem IDs.
2. Search PCI ID databases and vendor support site using those IDs.
3. If Linux:
   • Check kernel’s driver list (lspci -k).
   • Install firmware package if needed.
   • Build vendor driver or update kernel if driver missing.
4. If Windows:
   • Download official driver installer matching OS.
   • Install and reboot.
5. Test device functionality and monitor logs.

Troubleshooting

• Verify hardware IDs again — small transcription errors can mislead searches.
• Try Windows Update (sometimes supplies INF drivers).
• Check chipset drivers first—some components rely on chipset support.
• Install latest BIOS/UEFI firmware from OEM if device remains unrecognized.
• On Linux, check dmesg/syslog for error messages; ensure firmware packages (linux-firmware) are installed.
• If multiple drivers exist, use the one explicitly matching vendor/device IDs.
• As a last resort, contact OEM or component vendor support with the IDs and system model.

For Windows XP / Vista / 7

1. Run the installer executable (if included – e.g., setup.exe from MosChip or SUNIX).
2. If no installer exists, use the “Have Disk” method described above.
3. Important: On Windows XP, you may need to disable Driver Signature Enforcement temporarily if you see a “Digital Signature Not Found” error.

What “PCI 60806A” likely refers to

• PCI indicates a device using the PCI (Peripheral Component Interconnect) bus.
• 60806A is most likely a vendor/device or subsystem identifier pulled from a PCI ID string (e.g., 8086:xxxx style) or a model number printed on a network, storage, or audio adapter. There is no widely-known standardized product named exactly “PCI 60806A”; typical interpretation: it’s a PCI device whose chipset or board ID includes 60806A.