Guide to Updating Your Philips 55PUT6002/56 Software Keeping your Philips 55PUT6002/56
updated is essential for maintaining optimal performance, accessing new features, and fixing bugs that may affect your viewing experience. This Smart TV supports both online automatic updates manual updates via USB How to Check Your Current Software Version
Before starting an update, verify if one is actually needed. button on your remote control. Navigate to [Software Settings] [Current software info] Alternatively, for some versions, go to [Settings] [Update Software] [Current Software Info] Option 1: Automatic Online Update
If your TV is connected to the internet, this is the easiest method. Menu Path: [Settings] [Update Software] [Search for updates] [Internet] Enable the [Automatic Software Update]
feature in settings to receive notifications whenever a new version is available. Option 2: Manual Update via USB
If your TV is offline or the automatic update fails, follow these manual steps: 1. Prepare Your USB Drive Use an empty USB flash drive (Android updates can be around Format the drive to on your computer. 2. Download the Firmware Visit the official Philips Support Page 55PUT6002/56 in the search box. Locate the "Software & drivers" section and download the latest
file if its version number is higher than what is currently on your TV. 3. Install the Update
To update the Philips 55PUT6002/56, you must first verify your current version and then use a FAT32-formatted USB drive to install the official firmware. This model belongs to the 6000 series 4K Smart LED lineup. 🔍 Step 1: Check Current Software Version
Before downloading any files, confirm if an update is actually needed.
Navigate to: Menu > Setup > Software > Current software info.
Alternate: Settings > Update software > Current software info.
Note: Only proceed if the version on the Philips website is higher than your TV's current version. 📥 Step 2: Download & Prepare Files
Visit Support: Search for your model on the Philips Support Page.
Format USB: Use a computer to format an empty USB flash drive to FAT32.
Download: Get the latest .zip file from the Software & Drivers section.
Extract: Unzip the file directly to the root directory (main folder) of the USB drive. philips 55put6002 56 software update
The resulting file is typically named autorun.upg or similar. ⚙️ Step 3: Install the Update 6000 series 4K Ultra Slim Smart LED TV - 55PUT6002/56
Updating the software for your Philips 55PUT6002/56 6000 series TV is a straightforward process that ensures your device runs smoothly with the latest features and security patches. While most modern smart TVs can update over the internet, a manual update via a FAT32-formatted USB drive
is the most reliable way to resolve software bugs or performance issues. Preparation and Verification
Before starting, check your current firmware version by navigating to Menu > Setup > Software > Current software
. This allows you to compare your current version with the latest release available on the official Philips Support Page
. If the version on the website is higher, download the update file, which is typically a compressed Installation Steps Prepare the USB: Extract the contents of the downloaded
file directly to the root directory of an empty USB flash drive (avoid placing files inside folders). Connect and Initiate:
Insert the USB into the TV's USB port while the device is powered on. Automatic vs. Manual:
The update should begin automatically. If it doesn't, navigate to
Settings > Update software > Search for updates > USB > Local updates and select the file from your drive. Completion: The process usually takes 5 to 15 minutes
. During this time, the screen may go black or show a progress bar. Once finished, the TV will restart automatically; it is critical not to unplug the power until the Philips logo reappears. Troubleshooting
If the TV fails to recognize the update, ensure your USB drive is formatted specifically to
rather than NTFS or exFAT. For a "forced" update on unresponsive units, you can try turning the TV off, plugging in the USB, and then restoring power; this often triggers a boot-level installation indicated by a flashing front LED. Regular updates not only improve app compatibility but also refine the Pixel Plus Ultra HD processing for a better viewing experience. If you'd like, I can help you: Locate the exact firmware download if you're having trouble finding it on the site. Format your USB drive for the correct file system. Troubleshoot specific error messages you might see during the installation. 6000 series 4K Ultra Slim Smart LED TV - 55PUT6002/56
Philips doesn’t release updates for this model as often as they do for high-end OLEDs, but when they do, the changes matter. A typical update (e.g., from TPM171E to a newer revision) usually includes:
Do not assume you have the latest version. Many Philips 55PUT6002/56 units have never been updated because users rely on auto-updates (which often fail over Wi-Fi). Guide to Updating Your Philips 55PUT6002/56 Software Keeping
Step-by-step check:
Your screen will display a line like: TPM196E _ 001.002.124.002 (example only).
What you need: Compare your number to the latest version available on the Philips support site (usually ending in .212 or higher). If your version is more than 2 years old, you are outdated.
Older versions supported mobile-to-TV updates, but this is largely phased out. Stick to USB.
/56) to the model number. The standard formatting for this specific Philips TV model is usually 55PUT6002/56. If your specific label says "56" without the slash, you can remove it, but the slash is standard for the region code.Note: If you are looking for the actual download link, you can typically find it on the Philips Support website by searching "Philips 55PUT6002 support."
To update your Philips 55PUT6002/56 Smart TV, you can use the built-in system menus if the TV is connected to the internet, or perform a manual update via a USB flash drive. Option 1: Update via Internet (Easiest)
This is the most direct method if your TV has a stable Wi-Fi or Ethernet connection. Open Settings: Press the Home button on your remote.
Navigate: Go to [Settings] > [Device Preferences] > [System update].
Check for Updates: Select [Internet] and then [Check for update].
Install: If an update is found, follow the on-screen prompts. The screen will turn black for about 5–10 seconds as it prepares the installation.
Finalize: Once the progress bar finishes, the TV will restart. It is recommended to switch the TV off and back on once it fully restarts. Option 2: Update via USB (Manual)
Use this method if the internet update fails or if your TV is not connected to a network.
Format a USB Drive: Use a computer to format an empty USB flash drive to FAT32.
Download the File: Go to the Philips 55PUT6002/56 Support Page. Locate the Software & Drivers section and download the .zip file containing the latest firmware.
Extract: Right-click the downloaded .zip file and extract the contents (typically a .pkg or .upg file) directly to the root directory of your USB drive. Plug and Update: Turn the TV on. Insert the USB drive into one of the TV’s USB ports. Why Update Your Philips 55PUT6002
The TV should recognize the update automatically. If it doesn't, navigate to [Settings] > [Update Software] > [USB].
Wait: The process takes 5 to 15 minutes. Do not power off the TV or press any buttons on the remote during this time. Important Notes
Check Current Version: Before starting, verify your current software by going to [Settings] > [Update Software] > [Current Software Info]. Only update if the version on the website is newer.
Force Update: If the TV is stuck or the update won't trigger, you can sometimes "force" a USB update by plugging the drive in while the TV is unplugged from the wall, then plugging the power back in. Product: 55PUT6002/56 - Philips TV-, Sound
The Philips 55PUT6002/56 Go to product viewer dialog for this item.
is a 55-inch 4K Ultra Slim Smart LED TV from the Philips 6000 Series. While it offers strong foundational picture quality through its Pixel Plus Ultra HD engine, its software ecosystem is a significant point of contention for users, as it lacks a standard Google Play Store. Software & Update Performance Software updates for the Philips 55PUT6002/56 Go to product viewer dialog for this item.
are primarily intended to improve system stability, fix bugs like intermittent sound loss or random reboots, and update built-in applications.
Update Methods: The TV supports firmware upgrades via USB (using a FAT/FAT32 formatted drive), online via an active internet connection, or through a built-in firmware auto-upgrade wizard.
Smart Features Limitation: A major drawback noted by reviewers is the lack of the Google Play Store. It uses a proprietary Philips app store, which limits the availability of popular streaming apps like Disney+ or Stan, though Netflix and YouTube are pre-installed.
Reported Issues: Some users have reported that recent software updates can occasionally cause access issues with key apps like YouTube or Google. Others have noted a "slow response" to remote control commands, which updates sometimes aim to fix. Key Specifications Display 55" 4K Ultra HD LED (3840 x 2160) Picture Engine Pixel Plus Ultra HD with Ultra Resolution upscaling Connectivity 3 x HDMI, 2 x USB, Wi-Fi (1T1R Single band), Ethernet-LAN Audio 16W RMS with Virtual Surround and Clear Sound Smart TV
Open internet browser, Philips Store, Wi-Fi Miracast certified User Experience
“"Excellent tv however almost useless – Bought a smart tv and was very happy with the picture quality... The massive downside is that there is no Google Play store." — ProductReview.com.au” ProductReview
“"In my opinion, the clearness of this device is my favorite feature... but this is a great TV that you might have to fiddle around with now and again." — ProductReview.com.au” ProductReview
6000 series 4K Ultra Slim Smart LED TV 55PUT6002/56 | Philips
What you need: A USB 2.0 drive (4GB to 16GB), formatted to FAT32. Do not use a USB 3.0 drive; the TV’s port may not power it correctly.
Step 1: Download the .zip file from the Philips support page.
Step 2: Extract the folder. Inside, you will find a file named autorun.upg (or similar).
Step 3: Copy ONLY the .upg file to the root directory of your USB stick. (Do not put it inside a folder).
Step 4: Turn off the TV. Unplug it for 30 seconds.
Step 5: Plug the USB into the side port (not the rear service port).
Step 6: Hold down the Joystick button (under the Philips logo on the bottom bezel) while plugging the power back in.
Step 7: Continue holding until you see a blue screen with a progress bar.
Do not turn off the TV until the progress bar reaches 100% and the TV reboots itself.