Technical Overview: Phison MPALL V5.13.0C Phison MPALL (Mass Production Tool) V5.13.0C is a specialized low-level firmware utility used to repair, format, and configure USB flash drives featuring Phison controllers, specifically optimized for the PS2251-07 (PS2307) Core Functionality
This utility is primarily used for "unbricking" USB drives that exhibit critical errors such as: "No Media" Errors
: When a drive is detected by the OS but shows zero capacity. Write Protection : Overriding firmware-level read-only attributes. Firmware Corruption
: Restoring the drive's ability to communicate with the host computer. Bad Block Management
: Identifying and isolating defective NAND memory segments to restore drive stability. Technical Specifications & Compatibility Primary Controller Support : PS2251-07 (also known as PS2307). Interface Compatibility Phison Mpall V5.13.0c
: Optimized for USB 3.0 controllers, though often more stable during flashing when connected via USB 2.0 ports to avoid "handshake" timing issues. OS Support
: Typically Windows-based (Windows 7 through Windows 10/11). Step-by-Step Restoration Guide Using MPALL is a high-risk "last resort" process that erases all data permanently Identification : Use a tool like ChipGenius
to confirm the drive uses a Phison controller and to identify the specific (Vendor ID) and (Product ID). Initialization Unzip the MPALL V5.13.0C distribution. Run the main executable (typically MPALL_F1_9000_v*.exe Configuration to detect the connected drive. and select Basic Adjustment New Setting Ensure the values match your ChipGenius report. Firmware & Burner Selection Select the appropriate "Burner" file (e.g., BN07V*.BIN ) and "Firmware" file (e.g., FW07V*.BIN ) matching your controller version. . The process may take several minutes; do
disconnect the drive until a green "OK" or "Finish" status appears. Critical Troubleshooting Technical Overview: Phison MPALL V5
Phison MPALL V5.13.0c is a "Mass Production Tool" specifically used to flash firmware, repair "no media" errors, or low-level format USB drives featuring Phison controllers (such as the PS2251-07). Critical Pre-Checks
Before using MPALL, you must verify your drive's hardware. Using the wrong settings can permanently brick the device.
Identify the Controller: Use a tool like ChipGenius to find your Chip Vendor (must be Phison) and Controller Part Number (e.g.,
Backup Data: This process erases all data on the NAND chip during the low-level format. What is Phison MPall v5
Prepare Files: You may need specific Burner (BN) and Firmware (FW) binary files matching your controller and NAND type (e.g., MLC or TLC). Basic Recovery Guide
To restore a malfunctioning Phison drive using MPALL V5.13.0c: How to use Phison MPALL? | Tom's Hardware Forum
⚠️ CRITICAL WARNING
Using MPALL incorrectly can permanently brick your USB drive.
This tool is for Phison controllers only (detected via ChipGenius or USBDeview).
Backup all data before proceeding — everything will be erased.
Phison MPall v5.13.0c is a low-level formatting and mass production tool designed exclusively for USB flash drives that use Phison controllers. Unlike standard Windows formatting, which only erases file system data, MPall (short for "MP Tool All") performs a firmware-level restoration.
Be extremely careful. MPall tools are frequently bundled with adware, viruses, or fake versions.