Power Up: Connect the power cable to the printer and a wall outlet. Turn on the power switch.
Connect to PC: For a standard setup, use a USB cable to connect the printer to your computer.
Loading Paper: Open the cover and drop in an 80mm thermal paper roll. Ensure a small amount of paper hangs out before clicking the lid shut. Step 2: Download the Correct Drivers
The "POS 80" name is often used by multiple manufacturers (like Xprinter, Epos Now, or Panda). To get the right software:
Manufacturer Sites: Visit the official support page for your specific brand. For instance, Xprinter and Epos Now provide dedicated driver packages for their 80mm series.
Generic Drivers: If your printer is unbranded, look for a "Generic POS 80" or "ESC/POS" driver.
Run the Installer: Once downloaded, right-click the setup file and select "Run as Administrator". Step 3: Configure the Windows Settings
After the driver is installed, you need to tell your computer where to find the printer: Free Thermal Printer Drivers — ESC/POS, Epson, Xprinter
Setting up a thermal receipt printer involves downloading the correct driver and configuring the communication port (usually USB or Ethernet) to ensure your point-of-sale software can send print jobs correctly. Nextar POS Software 1. Download the POS 80 Driver pos 80 setup download
Because "POS 80" is a generic term for 80mm thermal printers, the exact driver depends on your brand. Most manufacturers provide these on their official support pages: : Download specific drivers for the 80mm series from the Xprinter Support Page : Use version 4.64 for Windows 11 or standard versions from POS-X Downloads Generic ESC/POS : If you have an unbranded printer, use a Generic ESC/POS Driver which works with most standard 80mm thermal hardware. PushPrinter 2. Physical Setup Before running the software, ensure the hardware is ready:
How to install POS-58 or POS-80 printer - Help Center Nextar
The Ultimate Guide to POS-80 Thermal Printer Setup and Driver Download
Setting up a POS-80 thermal printer can seem like a technical hurdle, but it is a straightforward process when you have the right steps. Whether you are a small business owner or a tech enthusiast, this guide will walk you through downloading the necessary drivers and configuring your printer for Windows 10 and 11. 1. Initial Hardware Setup
Before touching any software, ensure your hardware is properly connected:
Unpack: Verify you have the printer, power cable, USB cable, and a roll of 80mm thermal paper.
Power: Plug the power cable into the printer and a wall outlet.
Connection: Connect the USB cable from the printer to an available USB port on your computer. Power Up : Connect the power cable to
Paper Loading: Open the printer cover, place the 80mm paper roll inside (ensure the paper feeds from the bottom), and close the cover. 2. Where to Download POS-80 Drivers
Finding the correct driver is the most critical step. Since "POS-80" is a generic term for many brands like Xprinter or Rongta, you should prioritize the manufacturer’s site:
Official Xprinter Drivers: For Xprinter models, visit the Xprinter Official Download Page.
Naiting Tech Drivers: A reliable source for various POS-80 series drivers (BX, CX, and BL models) is available at Naiting-tech.
Generic Drivers: If you cannot find your brand, Nextar's Help Center provides a standard POS-80 driver that works for most generic models. 3. Step-by-Step Installation Guide (Windows)
Once you have downloaded the installation file (usually an .exe or a .zip), follow these steps:
Run the Installer: Right-click the downloaded file and select Run as Administrator. Accept Terms: Click Next and accept the license agreement.
Select Printer Model: During the setup, you will be prompted to select the printer type; choose POS-80 (or POS-80C if it has an automatic cutter). Sites like DriverPack or Snappy Driver Installer can
Select the Port: Choose the port where your printer is connected. For USB connections, this is typically USB001 or USB002.
Finish Setup: Click Install or Begin Setup. A message should confirm the installation is complete. 4. Testing Your Printer To verify everything is working, perform a "Self-Test":
Hardware Test: Turn the printer off. Press and hold the Feed button while turning the printer back on. It should print a configuration page with its specifications.
Software Test: In Windows, go to Settings > Bluetooth & devices > Printers & scanners. Select your POS-80 printer and click Print a test page. 5. Common Troubleshooting Tips
How to install POS-58 or POS-80 printer - Help Center Nextar
Avoid at all costs: “Driver Download .exe” pop-ups from ads, or sites asking for payment for “POS 80 PRO drivers.” The drivers are almost always free.
Some older POS 80 printers require a special USB-to-Serial driver (PL2303 or CH340 chip). If your PC makes the “USB connect” sound but the printer doesn’t appear as a printer, install a CH340 driver first, then the POS driver. Now it will show up as “USB Serial Port” – that’s normal.
.zip or .rar file).