Overview: The Smart Module Mirror feature allows users to create a "Master-Slave" relationship between amplifier channels (or Bridge Mode pairs) within the workspace. It enables real-time parameter linking and batch processing for identical loudspeakers, drastically reducing setup time and ensuring consistency across large-scale deployments.
As a responsible guide, I must direct you to the source. While this article explains how to use the manual, you still need the official document for pin-outs, safety certifications, and full DSP math.
To download the actual "Powersoft Armonia Plus Manual" (User Guide v1.6 or later):
Pro Tip: Load the PDF into a cloud drive. Use the search function inside the PDF (Ctrl+F) to find specific error codes instantly during a show.
If you are reading the manual, you are likely trying to get Dante or AES67 to work.
This is the most critical section of the manual. Unlike traditional limiters that look at voltage, TruePower looks at current and voltage simultaneously to protect voice coils. powersoft armonia plus manual
The Four Limiter Stages (per the manual's algorithm):
Real-world advice from the manual: When setting limiters for subwoofers, start with the TruePower threshold 3dB lower than the speaker’s continuous rating. You can gradually increase it while monitoring the "Load" meter.
[Dante/Analog/AES] → Input Router → Input EQ/Delay → Crossover →
Channel Processing (EQ, Limit, Delay) → Amplifier Stage → Output Meter → Speaker
Armonía Plus allows insertion of FIR filters before the crossover for system linearization or after for driver correction.
Document version 1.0 – For the latest updates, refer to the official Powersoft download area or contact support@powersoft.com.
Powersoft ArmoníaPlus is a powerful audio management software designed to streamline the design, control, and monitoring of professional sound systems. This guide serves as a comprehensive manual overview, covering everything from initial installation to advanced system tuning. 1. Getting Started: Installation and Setup Feature Proposal: "Smart Module Mirror" (Module Cloning &
To begin using ArmoníaPlus, ensure your hardware meets the necessary requirements and you have an active Powersoft Account for software downloads and plugin access.
Operating System: ArmoníaPlus is natively compatible with Windows. While there is no native macOS version, it can be run on a Mac using virtualization software like Parallels Desktop.
Download: The latest version can be found on the Powersoft Download Page.
Networking: Connect your amplifiers to the same network as your computer via Ethernet. Use the Communication Manager within the software to activate the correct network port. 2. The Workflow Approach
ArmoníaPlus organizes system management into four main stages, accessible via buttons on the bottom left or hotkeys Q, W, E, R: Part 8: The Official PDF - Where to
Design: Build your system virtually by adding amplifiers, speakers, and sources. You can also organize the workspace with shapes and images to represent different physical rooms.
Config: Map physical inputs (Dante, AES3, or Analog) to your channels. This is where you set priority patching to ensure audio continues even if a primary source fails.
Tune: Fine-tune your audio using tools like the Channel Strip Mode, which allows simultaneous adjustment of Gain, Mute, EQ, Delay, and Polarity in one interface.
Show: The live operational mode for monitoring system health and controlling active parameters. USER GUIDE - Powersoft
The manual includes a "Energy Smart" management table.