Qidi X-pro Manual Direct

This is organized by the most critical functions: Hardware Setup, Software/Slicing, and Operation.

D. Advanced Material Settings

The manual provides baseline profiles. Typical values: qidi x-pro manual

| Material | Nozzle Temp | Bed Temp | Enclosure Fan | |----------|-------------|----------|----------------| | PLA | 190-210°C | 40-50°C | Open door | | ABS | 230-240°C | 90-100°C | Closed door | | Nylon | 250-260°C | 70-80°C | Closed + desiccant | | TPU | 210-230°C | 40-50°C | Open, slow speed | This is organized by the most critical functions:

The "Brim" Problem

The manual suggests using a Brim for bed adhesion. If your prints are warping (corners lifting), increase the brim width in your slicer to 8mm or more. The X-Pro has a heated bed, but the aluminum build plate cools quickly; a wider brim holds those edges down. QIDI X-Pro 3D Printer (assembled) Quick start guide

Key Slicer Settings for X-Pro

| Material | Nozzle Temp | Bed Temp | Chamber | Fan | |----------|-------------|----------|---------|-----| | PLA | 200-210°C | 50-60°C | Off | 100% | | ABS | 240-250°C | 90-100°C | 40-50°C | 0-20% | | PETG | 230-240°C | 70-80°C | 30°C | 30-50% | | TPU | 210-230°C | 40-50°C | Off | 0% |

3. Box Contents

• QIDI X-Pro 3D Printer (assembled)
• Quick start guide (this manual)
• Tool kit (pliers, nozzle cleaner, Allen wrenches)
• 1 kg PLA sample filament
• 2x extruder cleaning needles
• Power cord and USB cable
• 4 GB SD card (with pre-sliced test models)
• Build surface sticker (spare)

12. Common G-Code Commands (Manual Use)

| Command | Function | |---------|----------| | G28 | Home all axes | | G29 | Auto-bed leveling (if enabled) | | M104 S205 | Set extruder 1 temp to 205°C | | M140 S60 | Set bed temp to 60°C | | M141 S45 | Set chamber temp to 45°C | | T0 / T1 | Switch to extruder 0 (left) or 1 (right) |

2. Understanding the LCD Interface

The QIDI X-Pro utilizes a full-color touchscreen. The manual provides a diagram of the icons, but here is how you will actually use them:

• Prepare Menu: This is where you manually move the axes. Use this to pre-heat your nozzle before loading filament.
• Control Menu: This allows you to adjust fan speeds and temperatures on the fly.
• Print from SD: The X-Pro supports SD cards and USB. The manual recommends slicing files to .gcode format on the SD card for the most stable connection.

6. Printing Your First Object

1. Prepare G-code: Use QIDI Slicer (based on Cura) or PrusaSlicer. Select “QIDI X-Pro” as your printer profile.
2. Transfer file: Copy the .gcode file to the SD card.
3. Insert SD card into the slot on the front panel.
4. Select file: Touch Print > SD Card > [Your File].
5. Monitor the first layer; adjust Z-offset live if needed (Tune > Z-offset).