G2010 - Resetter Printer Canon

How to Reset Canon G2010 Printer: The Ultimate Guide to Fix Error 5B00

Is your Canon PIXMA G2010 printer suddenly stopping in the middle of a job? Are you seeing a dreaded "Error 5B00" message on your computer screen, or are the Power and Alarm lights blinking alternately?

Don't panic. This is one of the most common issues with Canon printers. It usually means the Waste Ink Absorber Counter is full.

In this guide, we will walk you through exactly how to reset your Canon G2010 printer using the official Service Tool and the correct manual entry mode.

Part 9: Legal and Warranty Implications

• Voided warranty: Using any third-party resetter voids your Canon warranty. If your printer is under 1 year old, contact Canon instead.
• No harm to hardware (if done correctly): The resetter only changes a counter. It does not alter print quality or speed.
• Copyright status: Resetter tools reverse-engineer Canon’s service protocols. Distributing them is a gray area, but using one for your own printer is generally considered "fair use" for maintenance.

Part 2: What is a "Resetter Printer Canon G2010"?

A resetter (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero. resetter printer canon g2010

"The printer is still blinking after the reset."

• Disconnect the power cord and USB.
• Wait 5 minutes.
• Reconnect and turn on. If it still blinks, the Service Mode entry was likely unsuccessful. Try the button combination again (it requires precise timing).

The Ultimate Guide to the Resetter Printer Canon G2010: Why, When, and How to Use It

If you own a Canon PIXMA G2010 (often referred to as the Canon G2010), you have invested in one of the most popular ink tank printers on the market. Known for its high page yield and low cost per print, this all-in-one printer is a workhorse for home offices and small businesses.

However, every G2010 owner eventually encounters a frustrating roadblock: the dreaded "Ink Absorber Full" or "Waste Ink Pad Full" error. When this happens, your printer stops working entirely. The only software solution to bypass this is a tool commonly known as the resetter printer Canon G2010.

In this comprehensive guide, we will explain what this resetter is, why you need it, how to use it safely, and the long-term consequences of ignoring the hardware. How to Reset Canon G2010 Printer: The Ultimate

Step-by-Step Guide: Using the Resetter Tool

Now that the printer is in Service Mode, let's use the software to reset the counter.

1. Download and extract the Canon Service Tool (ensure your antivirus is temporarily disabled, as these tools are often flagged as "false positives").
2. Connect the printer to your PC via USB.
3. Run the Service Tool.exe file.
4. In the "USB Port" section, select the port that corresponds to your printer. It is usually the one with the highest number (e.g., USB001 or USB003). If the tool freezes when you select a port, try a different USB port on your computer.
5. Look for the "Ink Absorber Counter" section.
   • Check the box for Main.
   • Check the box for Platen (optional, but recommended).
6. Set the Counter Value to 0.
7. Click the "Set" button.
8. A confirmation message should appear. Click OK.
9. Turn off the printer using the power button.

What is a "Resetter Printer Canon G2010"?

A "resetter" (specifically a waste ink pad counter resetter) is a small software utility designed to reset the internal counter of your Canon G2010 printer.

Inside every Canon inkjet printer, there is a spongy area called the "waste ink absorber pad." During print head cleaning cycles, the printer flushes a small amount of ink into this pad to keep the nozzles clear. The printer tracks exactly how much ink has been flushed. Once this counter reaches a specific limit (usually around 5,000 to 8,000 pages), the printer assumes the pad is saturated and displays an error message like: Part 9: Legal and Warranty Implications

• "Ink Absorber Full"
• "5B00" or "5B01" Error Code
• "Waste Ink Pad is Full. Contact Service Center."

The resetter does not physically clean the pads. Instead, it tricks the printer’s memory into thinking the counter is back to zero, allowing you to continue printing.

What is the Waste Ink Pad?

Inside every Canon inkjet printer lies an absorbent pad (or series of sponges) designed to catch excess ink during print head cleaning cycles, borderless printing, and power flushing. Over time, this pad becomes saturated.

Q4: My resetter says "Failed" or "Error 001". What now?

• Ensure the printer is in Service Mode (green light steady, not flashing).
• Disable your antivirus temporarily (some block the driver communication).
• Run the software as Administrator.
• Try a different USB cable and port.