For a verified setup of the Samsung Flip Printing Software, you must download the official installer directly from Samsung's business portals. This software acts as a print server, allowing the Samsung Flip interactive display to send documents to a physical printer connected to your PC. Official Download & Verified Source
The only verified way to obtain the Samsung Flip Printing Software Setup.exe is through the official Samsung Display Solutions Download Center or the Samsung Support page. Avoid third-party "driver" sites to ensure the integrity of the .exe file. Installation & Setup Guide
Run with Admin Rights: Launch Samsung Flip Printing Software Setup.exe as an administrator.
Configure SSL Port: During installation, you will be prompted for an SSL port. Flip 1.0: Must use Port 443. Flip 2.0+: Supports any valid port for SSL connections.
Printer Connection: Ensure your physical printer is already installed on the PC where you are running this software.
Network Setup: Both the Samsung Flip and the PC must be on the same network.
Disable Power Saving: Turn off "Sleep" mode on the PC to prevent the print server from disconnecting. System Requirements Minimum Requirement Recommended OS Windows 7 (SP1) or Windows 10 Windows 10 (latest updates) CPU Dual Core 2.5 GHz Quad Core or higher RAM Storage 1 GB available space Source: Samsung Whiteboard User Manual Key Troubleshooting Tips
Static IP: It is highly recommended to use a static IP address for the PC acting as the print server so the Flip doesn't lose the connection after a reboot.
Firewall: If printing fails, ensure your antivirus or Windows Firewall is not blocking the assigned SSL port.
Paper Size: The Samsung Flip primarily supports printing on A4-size paper. samsung flip printing software setupexe download verified
The official Samsung Flip Printing Software is a driver that converts a computer into a dedicated printer server, allowing the Samsung Flip digital flipchart to send print jobs directly to a physical printer on the same network. Verified Official Sources
To ensure a secure download of the Samsung Flip Printing Software Setup.exe, only use Samsung’s official business and display solution portals:
Samsung Display Solutions: This is the primary B2B hub for digital signage and Flip-specific software.
Official Samsung Website: Search for your specific Flip model (e.g., WM55H, WM65R) in the support section.
HP Support for Samsung Printers: Since HP acquired Samsung's printer business, some specialized print drivers are hosted here. Installation & Configuration
The setup process configures your PC as an intermediary server for the Flip.
System Requirements: A Windows 10 (32/64-bit) or Windows 7 SP1 PC with at least 4 GB of RAM and a Dual Core 2.5 GHz+ CPU.
Run with Privileges: Execute Samsung Flip Printing Software Setup.exe as an administrator.
Port Configuration: During installation, you must assign a SSL port. Use Port 443 for Flip 1.0; Flip 2.0 and later can use custom ports. For a verified setup of the Samsung Flip
Network Setup: The PC and the Flip must be on the same network. It is highly recommended to assign a Static IP to the PC to prevent connection drops.
Flip Settings: On the Flip device, navigate to Settings > Connect > Advanced Settings > Print Server and enter the PC's IP address and assigned SSL port. Critical Usage Notes
Paper Size: The software is specifically optimized for A4 size paper; printing other sizes may lead to cropped images.
Power Saving: Disable "Sleep" mode on the PC server. If the computer enters power-saving mode, the Flip will lose connection and fail to print.
Diagnostics: If the connection fails, use the built-in tool located at C:\NetPrinting\DiagnosisTool.exe to check server status. Samsung Flip Printing Software
If you already downloaded a samsung-flip-printing-software-setup.exe:
| Check | Action |
|-------|--------|
| ✅ Source | hp.com or support.hp.com only |
| ✅ File extension | .exe (not .zip with unknown contents) |
| ✅ Digital signature | Right-click → Properties → Digital Signatures → “Hewlett-Packard Company” |
| ✅ Antivirus scan | Upload to VirusTotal if unsure |
| ❌ Avoid | third-party sites like “driver-fixer.com”, “softonic”, or “cnet” |
Official HP Software & Driver Downloads
➡️ hp.com/support
→ Search for: “Samsung Flip” or your specific Samsung printer model (e.g., Samsung Xpress SL-M2020, Multifunction Xpress series, or ProXpress).
Alternatively, use HP’s Smart Universal Print Driver (recommended for Flip/display-connected printers). 🔒 Security & Verification Checklist | Check |
Samsung does not always name it “Flip printing software.” Look for these exact names:
For the Flip 2 (WM65B) , the file is often labeled: Samsung_Flip_PC_Share_Manager_Setup_v2.1.0.exe
Even with a verified download, you may encounter problems. Here are the top three fixes.
After the samsung flip printing software setupexe download verified process, test the connection:
Troubleshooting: If the job disappears but doesn’t print, your printer’s IPP (Internet Printing Protocol) may be disabled. Re-run the setup.exe and check “Enable LPR byte counting.”
Go to HP Support
support.hp.com/us-en/drivers/printers
Enter your Samsung printer model
Example: Samsung Xpress SL-M2070W
(Do not type “Flip” – use the actual model number found on the printer label.)
Select your Windows version (10/11 – 64-bit recommended)
Download the full driver package – usually named:
Full_Webpack-xxx.exe or SamsungPrinterDriverSetup.exe
Run as Administrator – right-click the .exe → Run as administrator
Choose connection type during setup:
