Samsung Gtc6712 India Odd Firmware [new] 🆕 Must Watch

Finding resources for the Samsung GT-C6712 (also known as the Samsung Star II DUOS) can be difficult because it is a legacy device from the "Feature Phone" era (circa 2011).

Regarding your specific query about "India odd firmware": In Samsung firmware terminology for feature phones, the term "Odd" usually refers to the Sales Code (CSC) or Region. For India, the standard code is "INU". However, some specific carrier variants or service center flashes used codes like "ODD" (Open Digital Delivery) or similar variants. Generally, INU is the standard Indian firmware.

Here is a useful guide regarding the firmware, specifications, and revival process for the Samsung GT-C6712 in India. samsung gtc6712 india odd firmware

3. How to Identify Your Current Firmware

If your phone can turn on, you can check your current version to see if you already have the "Odd" or Indian variant.

1. Dial *#1234# on the keypad.
2. Look at the CSC line.
   • If it ends in INU, it is a standard India Retail unit.
   • If it ends in ODD or ODM, it is an Operator variant.

Headline

Samsung GTC6712 in India running an odd firmware: mystery, risks, and quick fixes Finding resources for the Samsung GT-C6712 (also known

Step-by-Step Flashing Guide:

Step 1: Extract the Firmware Create a folder on your Desktop named C6712_INDIA. Extract the downloaded ODD firmware. Look for three files:

• BOOTFILES (Bootloader)
• C6712DDLI1_ODD_xxx.bin (Main firmware/PDA)
• C6712DDLI1_RC_xxx.bin (Resource/CSC)

Step 2: Install Drivers & Disable Ports Connect the phone (powered off) to the PC. Windows will try to install drivers. If it fails, go to Device Manager -> Ports (COM & LPT) -> Disable any "Samsung MITs USB Port" that shows an error. Reconnect. Dial *#1234# on the keypad

Step 3: Launch Multiloader

• Run Multiloader.exe (Run as Administrator).
• Select "Dolphin" from the Chipset dropdown.
• Check boxes: Boot Change, Master Rom, RC File.
• Map the files:
  • Boot: Select BOOTFILES folder.
  • Master Rom: Select the .bin file with "DD" in the name (the ODD firmware).
  • RC File: Select the Resource file.

Step 4: Download Mode

• Turn off the phone completely. Remove the battery for 10 seconds, then reinsert.
• Hold Volume Down + Power buttons simultaneously until the screen shows "Downloading... Do not turn off target!!"

Step 5: Flash

• In Multiloader, click "Port Search." The COM port should turn green.
• Click "Download."
• Wait 5–8 minutes. The progress bar will go from 0% to 100%.
• When you see "PASS," disconnect the USB cable.

Step 6: First Boot The phone will reboot. The initial boot after ODD firmware takes approximately 3–4 minutes (white screen persists longer than usual). Do not touch it. It will eventually show the TouchWiz setup screen in English/Hindi.