R3 Grease Datasheet Extra Quality — Shell Alvania

The product formerly known as Shell Alvania R3 (or Alvania RL 3) has been rebranded as Shell Gadus S2 V100 3. It is a premium-quality, high-performance multipurpose grease designed for industrial applications requiring a medium/hard consistency. 🛠️ Key Technical Specifications Test Method Typical Value NLGI Consistency Soap Type Lithium Hydroxystearate Base Oil Type Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C 10–11 cSt Cone Penetration (Worked @ 25°C) 220–250 (0.1 mm) Dropping Point IP 396 / ASTM D566 180°C – 190°C Operating Temperature Range -30°C to +130°C 🌟 Performance Features Shell Gadus S2 V100 3

Shell Alvania R3 (currently marketed as Shell Gadus S2 V100 3 Go to product viewer dialog for this item.

) is a high-performance, medium-to-hard industrial grease designed for applications where high operating speeds and reliability are critical. It is a lithium hydroxystearate soap-based grease formulated with highly refined mineral oils and advanced additives for oxidation, wear, and rust protection. Technical Specifications According to the Shell Alvania RL 3 datasheet from Lubesta Shell Gadus S2 V100 3 technical data sheet , the typical characteristics are: Test Method NLGI Consistency 3 (Medium/Hard) Lithium hydroxystearate Base Oil Type Mineral oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point 180°C to 190°C ASTM D396 / IP 132 Operating Temperature Range -30°C to +135°C Key Features and Benefits High-Speed Performance

: Specifically optimized for bearings operating at their maximum rated speeds within the stated temperature range. Oxidation and Mechanical Stability

: Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under mechanical stress to prevent leakage. Corrosion Protection

: Contains specific inhibitors to provide effective protection in hostile environments. Extended Service Life

: Formulated with non-crystalline additives that meet low-noise bearing requirements, extending the life of the equipment. Typical Applications Electric Motor Bearings

: Particularly recommended for industrial electric motors where low noise and high performance are required. Rolling and Plain Bearings

: Suitable for general industrial lubrication of various bearing types. Sealed-for-Life Bearings

: Often used in factory-fill applications by bearing manufacturers. Water Pump Bearings

The Shell Alvania R3 (currently rebranded as Shell Gadus S2 V100 3) is an extra-quality, high-performance multipurpose grease designed for industrial applications. It is particularly valued for its balance of mechanical stability and resistance to high temperatures and water. 1. Technical Specifications shell alvania r3 grease datasheet extra quality

The datasheet for this grease highlights its medium-to-hard consistency (NLGI 3), which makes it suitable for high-speed bearings where less fluid leakage is required. Test Method NLGI Grade Thickener Type Lithium Hydroxystearate Base Oil Type Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Worked Penetration @ 25°C 220–250 (0.1 mm) Dropping Point Operating Temperature -30°C to +130°C [Sources: Shell Gadus S2 V100 3 TDS, Euro Industry] 2. Performance Characteristics

The "extra quality" designation stems from several key protective features found in its formulation: Shell Gadus S2 V100 3

Shell Alvania R3 Grease Datasheet: Unlocking Extra Quality for Industrial Applications

In the realm of industrial lubrication, the right grease can make all the difference in ensuring the smooth operation and longevity of machinery. One such high-performance grease that has garnered significant attention in recent years is Shell Alvania R3. This article aims to provide an in-depth look at the Shell Alvania R3 grease datasheet, highlighting its key features, benefits, and applications, as well as what sets it apart in terms of extra quality.

Introduction to Shell Alvania R3 Grease

Shell Alvania R3 is a premium quality, lithium-based grease specifically designed for the lubrication of rolling bearings and other high-speed applications. Its unique formulation provides excellent wear protection, corrosion resistance, and thermal stability, making it an ideal choice for industries where equipment reliability and efficiency are paramount.

Shell Alvania R3 Grease Datasheet: Key Features

The Shell Alvania R3 grease datasheet provides detailed information on the product's characteristics, performance, and specifications. Some of the key features of Shell Alvania R3 grease include:

• Thickener: Lithium-based thickener for excellent shear stability and resistance to softening under high-temperature conditions.
• Base Oil: High-viscosity index base oil for optimal lubrication and wear protection.
• Additives: Specially formulated additives for enhanced corrosion protection, wear resistance, and extreme pressure performance.
• Dropping Point: 180°C (356°F) minimum, ensuring excellent high-temperature performance.
• NLGI Grade: 2, providing a good balance between stiffness and flowability.

Benefits of Shell Alvania R3 Grease

The benefits of using Shell Alvania R3 grease are numerous, including: The product formerly known as Shell Alvania R3

• Extended Equipment Life: Excellent wear protection and corrosion resistance help extend equipment life and reduce maintenance costs.
• Improved Performance: Smooth, consistent lubrication ensures optimal equipment performance and efficiency.
• Increased Safety: High-temperature stability and resistance to oxidation minimize the risk of equipment failure and associated safety hazards.
• Reduced Downtime: Long-lasting lubrication and reduced wear on components minimize downtime and increase overall productivity.

Applications of Shell Alvania R3 Grease

Shell Alvania R3 grease is suitable for a wide range of industrial applications, including:

• Rolling Bearings: High-speed bearings, ball bearings, and roller bearings in industries such as automotive, aerospace, and power generation.
• Gears and Gearboxes: Lubrication of gears, gearboxes, and other high-load applications.
• Industrial Machinery: General lubrication of industrial machinery, including pumps, motors, and gear drives.

What Sets Shell Alvania R3 Grease Apart: Extra Quality

So, what sets Shell Alvania R3 grease apart from other lubricants on the market? The answer lies in its exceptional quality and performance. Shell Alvania R3 grease has undergone rigorous testing and has been proven to:

• Outperform Competitors: In independent testing, Shell Alvania R3 grease has demonstrated superior performance in terms of wear protection, corrosion resistance, and high-temperature stability.
• Meet or Exceed Industry Standards: Shell Alvania R3 grease meets or exceeds industry standards, including DIN 51524, ISO 6743, and ASTM D4950.
• Provide Long-Term Protection: The unique formulation of Shell Alvania R3 grease provides long-term protection against wear, corrosion, and oxidation, extending equipment life and reducing maintenance costs.

Conclusion

In conclusion, Shell Alvania R3 grease is a high-performance lubricant that offers exceptional quality and performance for industrial applications. Its unique formulation, key features, and benefits make it an ideal choice for industries where equipment reliability and efficiency are critical. By choosing Shell Alvania R3 grease, industries can expect extended equipment life, improved performance, increased safety, and reduced downtime. Whether you're looking to upgrade your current lubrication program or simply want to learn more about the benefits of Shell Alvania R3 grease, this datasheet provides a comprehensive overview of this exceptional product.

Shell Alvania R3 (now rebranded and updated as Shell Gadus S2 V100 3

) is a high-performance, multipurpose industrial grease designed for the lubrication of rolling element bearings. It is a medium/hard lithium-based grease formulated with highly refined mineral oils and specialized additives to prevent oxidation, wear, and rust. Technical Specifications

The following data reflects the typical physical characteristics for the R3 (NLGI 3) grade: Typical Value NLGI Consistency Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration (Worked @ 25°C) 220–250 (0.1 mm) Dropping Point Operating Temperature Range -30°C to +130°C Key Performance Features Reliable High-Temperature Performance:

Maintains stable lubrication in bearings operating at temperatures up to +130°C, extending bearing life. Oxidation & Mechanical Stability: Benefits of Shell Alvania R3 Grease The benefits

Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under vibration. Corrosion Resistance:

Specially formulated to protect bearing surfaces against rust, even in humid environments. Long Storage Life:

Consistency and performance remain stable during prolonged storage. Primary Applications Electric Motor Bearings:

Particularly recommended for high-speed industrial electric motors. Rolling Element Bearings:

Suitable for a wide range of general industrial applications. High-Speed Bearings:

Optimized for bearings operating at their maximum rated speeds where a firmer grease (NLGI 3) is required to prevent leakage. Shell Product Catalogue Portal Safety & Environmental Handling

Unlikely to present hazards when used correctly. Avoid skin contact and use impervious gloves. Environment:

Do not discharge into drains, soil, or water. Dispose of used grease at authorized collection points. Composition:

Contains highly refined mineral oils (<3% DMSO extract) and specific additives like sodium nitrite and N-1-naphthylaniline. For current safety documentation, you can search for the Shell Material Safety Data Sheet (MSDS) using the product code or name. or see a list of compatible alternatives from other brands? Shell Alvania Grease R Series Overview | PDF - Scribd

Best applications (per datasheet)

• Industrial electric motors (bearing lubrication)
• Fans, pumps, conveyors (normal to moderate loads)
• Automotive wheel bearings (non-ABS, standard use)
• Agricultural machinery (moderate dust/moisture exposure)

3.2 Enhanced Water Resistance

The Extra Quality variant undergoes a more rigorous water washout test. At 79°C, standard greases might lose 4-5% mass; Extra Quality loses less than 3%. For applications like agricultural equipment or marine deck machinery, this is a decisive factor.

1. Superior Mechanical Stability

Under high shear conditions, inferior greases can soften or leak out of bearings. Shell Alvania R3 maintains its consistency, ensuring the lubricant stays in place to protect components even during heavy vibration or shock loading.