Stevens Model 94 Parts Diagram New Online

Since the Stevens Model 94 is a classic, no-nonsense single-barrel break-action shotgun, a "parts diagram review" is essentially a guide to understanding how these simple, rugged firearms function and how to maintain them.

Because Stevens produced the Model 94 for many decades (roughly the 1930s through the 1980s), there is no single "new" official factory diagram currently in circulation. Most diagrams found today are reprints or digital scans from old service manuals.

Here is a full review and breakdown of the Stevens Model 94 parts diagram, identifying the key components, their functions, and what you need to look for when repairing one.

Category 3: The Ejection System

This is the most distinctive feature of the Model 94 compared to cheaper singleshots like the "Hardware Store" guns.

  1. Ejector Rod (Rod, Ejector): This is a long, thin steel rod that runs along the left side of the barrel lug.
  2. Ejector Spring: A small coil spring that pushes the rod forward.
    • How it works (per the diagram): When you open the gun, the ejector rod hits a stop, kicking the fired shell out forcefully.
    • Comparison: Many diagrams confuse "Extractors" (pull the shell out halfway) with "Ejectors" (throw the shell out). The Model 94 is an Ejector gun. Ensure your diagram shows the rod and spring; if it only shows a hook, it might be a diagram for a different model (like the Model 94C which varied).

1. The Stock Assembly

  • Buttplate (often hard rubber or steel)
  • Stock bolt (long screw running through the wrist of the stock)
  • Tang screw (connects the trigger guard to the receiver)

How to Use the Diagram to Find “New” Parts

Once you have your diagram, here is the workflow:

Step 1: Identify the Exact Variant A diagram for a 1940s Model 94 may not fit a 1970s Model 94C. Look for a letter suffix after the serial number or on the barrel stamp.

  • Key difference: Early models used a flat mainspring; later models (94B, 94C) used a coil mainspring.

Step 2: Match the Part Number Let’s say your firing pin is broken. On the Numrich diagram, it might be labeled Part #42. Note the OEM part number (e.g., “S-94042”).

Step 3: Search for “New Old Stock” or Reproduction Type that part number into eBay, GunBroker, or Numrich. Because the Stevens 94 is so common, many parts are still available as new-old-stock (unused original factory parts). Companies like Wisner’s also make reproduction firing pins and extractors.

Step 4: Verify Fitment with Your Diagram Before buying, compare the part in the seller’s photo to your new parts diagram. Pay attention to:

  • The length of the firing pin nose.
  • The direction of the extractor claw.
  • The coil count on springs.

Verdict on the Model 94 Diagram

The Stevens Model 94 parts diagram is a masterclass in mechanical simplicity.

  • Clarity: ★★★★☆ (Simple enough for beginners, though spring placement can be tricky).
  • Parts Availability: ★★★☆☆ (Common springs are easy to find; specific locking bolts or hammers can be harder to source new, often requiring "donor" guns).
  • Utility: If you are restoring a Model 94, the diagram is essential for one specific reason: Spring Orientation. Reassembling the hammer spring and lever spring without a reference is extremely difficult.

Recommendation: If you are stripping yours, take photos before you disassemble. The diagram provides the names of the parts, but your photos provide the orientation, specifically for the V-springs which can be installed upside down.

Preserving Your Restored Stevens 94

Once you’ve used the diagram to rebuild your shotgun, protect your investment:

  • Use only low-pressure loads. Modern high-velocity hunting loads can stress the 100-year-old hinge pin.
  • Grease the hinge pin, not oil. Grease stays put longer.
  • Store with the action open. This relieves pressure on the top lever spring.

Category 2: The Firing System (Trigger Group)

The trigger group on the Model 94 is self-contained and usually modular (pinned into the receiver).

  1. Hammer: The large, unexposed hammer inside the receiver.
    • Diagram Insight: Note the "half-cock" notch on the diagram. The Model 94 relies on a half-cock safety, not a cross-bolt safety button.
  2. Hammer Spring (Mainspring): Usually a V-spring (leaf spring) or a heavy coil spring depending on the specific year of manufacture.
  3. Sear: The small lever that holds the hammer back until the trigger is pulled.
    • Wear Point: If the gun fires when you close the action (slam fire), the sear or sear notch on the hammer is worn. The diagram will show how the sear interacts with the trigger.
  4. Trigger: Simple curved piece.
  5. Trigger Guard: Often stamped steel or plastic on later models (black).

Conclusion: Your Next Step

Searching for a stevens model 94 parts diagram new is the first, most crucial step in bringing a piece of American history back to life. You are not alone—thousands of these shotguns are still in fields, closets, and gun safes, waiting for a simple spring or firing pin replacement.

Start with Numrich’s interactive schematic. Download or print a high-resolution PDF. Cross-reference the part numbers, and order your components with confidence.

Remember: The Stevens Model 94 is one of the easiest single-shots to work on. With a clean, new diagram in hand, a basic set of punches, and a little patience, you can have this classic shotgun firing for another 100 years.

Have a tip or a specific part you’re hunting for? Leave a comment below—the restoration community is strong, and we share diagrams like treasure maps.

Keywords used: stevens model 94 parts diagram new, Stevens 94 schematic, Model 94 firing pin, Numrich Stevens 94, restore Stevens shotgun, Model 94 extractor spring, Savage 94 parts.

Title: Finding a New Stevens Model 94 Parts Diagram: Your Guide to the Classic Single-Shot

Introduction If you own a Stevens Model 94 (or the nearly identical Model 94C, 94B, or 94 Series M), you know you’re holding a piece of American history. Made by Savage/Stevens from the 1930s well into the 1960s, this “Favorite” action single-shot .22 is a tack-driver and a perfect trainer.

But try finding a replacement extractor or sear spring? Suddenly, that classic rifle becomes a paperweight. stevens model 94 parts diagram new

If you’ve been searching for a “Stevens Model 94 parts diagram new,” you’ve likely run into a problem: most of the original diagrams are faded, low-resolution scans from the 1940s. Today, we’re looking at how to find new, clear, usable diagrams to get your rifle back in the field.

Why “New” Matters for an Old Diagram Let’s be honest—the original factory diagrams are historically cool, but they are often:

  • Blurry or photocopied three times over.
  • Missing part numbers for late-production variants.
  • Lacking torque specs or modern part nomenclature.

A “new” diagram doesn’t mean the rifle has changed; it means the presentation has. Today’s best resources redraw or high-res scan these schematics so you can actually read the difference between the firing pin (Part No. 94-15) and the pivot screw (Part No. 94-22).

Where to Find a New Stevens 94 Parts Diagram

1. Numrich Gun Parts (gunpartscorp.com) This is the gold standard. Numrich has a proprietary, cleanly redrawn schematic for the Stevens Model 94. It is not a fuzzy scan. It is a modern, vector-style line drawing with:

  • Clearly numbered parts (1 through 50+).
  • A corresponding interactive parts list.
  • “In Stock” vs. “Out of Stock” indicators.

How to use it: Go to their site → Search “Stevens 94” → Click “Schematic.” You can zoom in without losing resolution.

2. Midwest Gun Works (midwestgunworks.com) MGW offers a different layout—sometimes easier for visual learners. Their diagram is a new high-definition photo-labeled diagram, not a line drawing. This is excellent for identifying springs and pins by actual shape.

3. Savage/Stevens Forum (savageshooters.com) Here is where the community builds “new” diagrams. Several members have created annotated PDFs that correct errors in the original manuals. Search the forums for “Stevens 94 exploded view rev. 2” — a fan-made document that labels part variations for the 94C (clip model) vs. 94 (tube feed).

4. YouTube – “Stevens 94 Disassembly” with Overlays Not a static diagram, but moving diagrams. Channels like GunBlue490 or LegacyCollectibles often overlay modern part labels onto video of the actual takedown. Pause the video at 4:30, and you have a brand-new visual reference.

Pro Tip: Print Your Own “New” Wall Diagram Once you find a high-res image (minimum 1200px wide), do this:

  1. Download the PNG/PDF from Numrich (free to view).
  2. Take it to a local print shop (or use FedEx Office online).
  3. Print it as an 11x17” blueprint on heavy matte paper.
  4. Laminate it for your workbench.

Now you have a physically new diagram that won’t rip or smudge with gun oil.

Understanding the Key Parts (Based on New Diagrams) On any modern diagram of the Stevens 94, pay special attention to:

  • Extractor (Part #23): Often missing or chipped. New diagrams show its tiny under-lip clearly.
  • Breech Block Lever Spring (Part #34): The most common failure. A new diagram will show which way the spring’s “hook” faces.
  • Firing Pin Retainer Pin (Part #17): Easy to lose. New diagrams call out its roll-pin vs. solid-pin variations.

A Note on “New Old Stock” vs. “Reproduction” If your new diagram shows a part as available, double-check if it’s original (NOS) or newly manufactured. Companies like Jack First Gun Parts are making new extractors and sears for the 94. Your new diagram will often have a star or footnote for these reproduction parts.

Final Thoughts: Don’t Settle for Blurry Scans The Stevens Model 94 deserves better than a 72dpi JPEG from 1998. Take 10 minutes to download or print a new clear diagram. Not only will you avoid ordering the wrong trigger spring, but you’ll also gain a real appreciation for how clever John Browning’s original falling-block design really was.

Have you found a better source for a new Stevens 94 diagram? Drop it in the comments below. And if you need help identifying whether you have a 94, 94B, or 94C, check out our identification guide linked here.

Tags: Stevens Model 94, parts diagram, single shot rifle, gun repair, Savage Stevens, vintage .22 restoration

The Ultimate Guide to the Stevens Model 94 Parts Diagram The Stevens Model 94 is a legend among single-shot shotguns. Known for its "hammer-style" action and rugged reliability, it was a staple in American farmhouses and hunting camps for decades. Whether you’ve inherited a family heirloom or picked up a project gun at a pawn shop, having a new, clear Stevens Model 94 parts diagram is essential for maintenance, restoration, or repair.

In this guide, we’ll break down the anatomy of this classic firearm, explain how the parts interact, and help you identify exactly what you need to keep your Model 94 running for another generation. Why You Need a New Parts Diagram

The Stevens Model 94 was produced in numerous variations (94A, 94B, 94C, 9478, etc.) under various brand names like Savage and Springfield. Over time, original manuals become lost or illegible. A modern, high-resolution diagram allows you to:

Identify missing components: Single-shots are simple, but a missing firing pin spring or extractor plunger can render the gun useless. Since the Stevens Model 94 is a classic,

Safe Disassembly: Avoid "launching" springs across the room by knowing exactly where the tension points are.

Correct Parts Ordering: Ensure you are buying the right generation of parts for your specific sub-model. Key Components of the Stevens Model 94

While there are minor differences between production years, the core architecture of the Model 94 remains consistent. Here are the primary groups found on a standard diagram: 1. The Barrel Assembly

The Barrel: Available in 12, 16, 20, 28 gauge, and .410 bore.

The Extractor/Ejector: This is the most common part to wear out. It slides into the breech end of the barrel to lift or kick out spent shells.

Forend Iron & Wood: The forend snaps onto a lug on the bottom of the barrel, providing the leverage needed to "break" the action open. 2. The Receiver and Internal Action The heart of the Model 94 is its simple break-action.

The Hammer: A traditional external hammer that must be manually cocked.

The Mainspring and Plunger: These provide the force required for the hammer to strike the firing pin.

The Firing Pin: Housed within the receiver; it’s held in place by a retaining screw or pin.

The Trigger and Sear: A simple interface that releases the hammer when pulled. 3. The Stock and Hardware

Buttstock: Usually made of walnut or birch (tenite plastic on some older models).

Stock Bolt: A long bolt that runs through the center of the stock to secure it to the receiver.

Buttplate: Often plastic or hard rubber, held by two wood screws. Common Repair Issues (And the Parts Involved)

If you are looking at a parts diagram because your Stevens 94 isn't working, check these common culprits:

Light Primer Strikes: This is usually a sign of a weakened Mainspring or a chipped Firing Pin.

Gun Won’t Stay Closed: This often involves the Locking Bolt or the Locking Bolt Spring. If these are worn, the action may pop open upon firing—a major safety hazard.

Extraction Failure: Check the Extractor Plunger and its associated spring. Debris often builds up in this channel, preventing the extractor from moving freely. How to Read Your New Diagram

When looking at a modern schematic, parts are typically numbered (Exploded View).

Find your base model: Confirm if your receiver says "94," "9478," or has a series letter.

Locate the "Exploded" lines: Follow the dotted lines to see the order of assembly. For example, the hammer usually sits on a pivot pin that also secures the trigger guard. Category 3: The Ejection System This is the

Cross-reference part numbers: Most reputable parts dealers (like Numrich or Brownells) use standardized numbering based on these original diagrams. Maintaining Your Stevens Model 94

Once you’ve used your diagram to reassemble your shotgun, keep it functional with basic care:

Lubricate Pivot Points: Use a high-quality gun oil on the hinge pin and the hammer pivot.

Check the Stock Bolt: Single-shots have a tendency to vibrate the stock bolt loose over time. Ensure it’s snug to prevent the wood from cracking. Conclusion

The Stevens Model 94 is a masterpiece of simplified engineering. With a new parts diagram in hand, you can confidently strip the action, replace worn springs, and ensure this classic American shotgun stays in the field where it belongs.

The Stevens Model 94 is a classic break-action, single-shot shotgun produced by Savage Arms (under the Stevens brand) from approximately 1937 to 1984. Renowned for its utilitarian design, it features an exposed rebounding hammer and was manufactured in various gauges, including 12, 16, 20, and .410 bore. Stevens Model 94 Parts List

The internal mechanism of the Model 94 is intentionally simple. While specific sub-models (like the 94C or 94B) may have slight variations, the following are the primary components found in most diagrams: How-To: Dis-assemble Stevens Model 94 Shotgun

Where to Find the Parts Diagram:

  1. Savage Arms Website: You can visit the Savage Arms website (www.savagearms.com) and search for the Stevens Model 94. They might have a section for "Legacy Products" or "Vintage Models" where you can find information on older models like the Stevens Model 94.
  2. Online Forums and Communities: Websites like GunsAmerica, GunBoard, or Reddit's r/gunsmithing and r/firearms might have threads or posts with parts diagrams or information on the Stevens Model 94.
  3. Vintage Gun Parts Websites: Websites specializing in vintage gun parts, such as Numrich Gun Parts Corporation, Sarco Inc., or MidwayUSA, might have parts diagrams or lists for the Stevens Model 94.

Parts Diagram:

Here's a basic parts diagram for the Stevens Model 94:

  1. Barrel
  2. Receiver
  3. Bolt
  4. Stock (buttstock and fore-end)
  5. Trigger Guard
  6. Trigger
  7. Hammer
  8. Cocking Piece
  9. Firing Pin
  10. Extractor
  11. Ejector
  12. Magazine (tubular or clip-fed)

Key Components:

  • Action: The Stevens Model 94 has a lever-action design, which uses a lever on the side of the rifle to eject and chamber rounds.
  • Caliber: The Model 94 was chambered in various calibers, including .22, .25, .32, .33, .38, and .44.

Tips for Finding Parts:

  1. Take Your Time: When searching online, use specific keywords like "Stevens Model 94 parts diagram" or "Stevens Model 94 schematic."
  2. Measure and Compare: When ordering parts, make sure to measure and compare with the original parts to ensure compatibility.
  3. Consult with Experts: Reach out to gunsmiths or collectors familiar with the Stevens Model 94 for guidance on finding parts or identifying specific components.

Keep in mind that the Stevens Model 94 is a vintage rifle, and some parts might be hard to find or require modification to fit. Make sure to follow all safety guidelines and consult with a gunsmith if you're unsure about any aspect of the rifle's assembly or repair.

The Stevens Model 94 is a legendary American "utilitarian workhorse" that has served hunters and homeowners since the late 1920s. Whether you're a seasoned gunsmith or a first-time owner, having a clear parts diagram is the first step toward preserving this classic break-action single-shot. The Anatomy of a Classic

The Model 94's enduring appeal lies in its elegant simplicity. Key components you'll find on a standard diagram include:

The Receiver & Action: Unlike modern semi-autos, the 94 uses a rugged break-action design. A simple thumb release opens the barrel for loading and unloading.

Safety Features: Most models feature a rebounding hammer. This clever bit of engineering ensures the hammer stays in a safe position and won't strike the firing pin unless the trigger is fully depressed.

Stocks & Furniture: Earlier models used walnut, but you may encounter the unique Tenite stocks—a vintage wood-infused resin popular in the mid-20th century. Common Repairs & Maintenance

Because these firearms were produced until 1984, many today require a bit of "TLC" to stay functional.