Usb | Device Id Vid 058f Pid 1234 Full !!hot!!

The USB device ID VID 058F PID 1234 identifies a Flash Drive or Mass Storage Device manufactured by Alcor Micro Corp..

This specific combination is commonly associated with generic or "no-name" USB sticks and is frequently found in devices using Alcor Micro controllers, such as the AU698x series (e.g., AU6986, AU6988, or AU6989). Device Specifications Vendor ID (VID): 058F (Alcor Micro Corp.). Product ID (PID): 1234 (Flash Drive / Mass Storage). Device Type: USB Mass Storage Device (Flash Disk). Protocol Version: Typically USB 2.0 (High Speed). Controller Vendor: Alcor Micro. Common Uses and Issues

This ID is often seen in high-volume, generic flash drives. Because these IDs are programmable, they are sometimes found on "fake" or counterfeit drives where the reported capacity (e.g., 32GB) does not match the actual physical NAND flash storage. usb device id vid 058f pid 1234 full

Firmware Repair: If the drive shows "No Media" or "0MB" capacity, users often look for specialized "Alcor MP" (Mass Production) tools specifically for the AU69xx controller to reflash or repair the drive.

Driver Identification: Windows and other operating systems use this VID/PID to load the standard USB Mass Storage Class driver. No special third-party driver is usually required for basic operation. How to Verify Your Device The USB device ID VID 058F PID 1234

You can verify these identifiers on different platforms to confirm the hardware:

Windows: Right-click Start > Device Manager > Universal Serial Bus controllers > Right-click device > Properties > Details > Hardware IDs. Linux: Open a terminal and run the lsusb command. macOS: Go to About This Mac > System Report > USB. Flash Drive — USB 058F:1234 - DeviceHunt Common Misconceptions About VID 058F PID 1234 There

Common Misconceptions About VID 058F PID 1234

There are several myths circulating on forums:

Myth 1: “This is a virus or malware.” – False. It is a legitimate hardware ID. Malware might disguise itself using a known VID/PID, but the ID itself is clean.
Myth 2: “It’s a dead device.” – Not necessarily. The fact that Windows sees the VID/PID means the USB controller is alive. The issue is driver or configuration.
Myth 3: “Deleting it from Device Manager solves everything.” – Temporary fix. Upon reboot, Windows will rediscover it and the error returns unless drivers are installed.

To identify the device:

lsusb | grep 058f:1234

Fix 4: Update BIOS / UEFI Firmware

Older laptops may have handshake issues with the internal USB hub. A BIOS update can include new USB module firmware.

Identify your motherboard or laptop model (msinfo32 on Windows).
Visit manufacturer support → Downloads → BIOS.
Follow their flashing instructions carefully.