Usbtv007 Driver Windows 10 64 Bit May 2026

USBTV007 driver for Windows 10 (64-bit) enables the "EasyCap" or "Easier CAP" video capture adapter to interface with modern systems. While often referred to as a "USBTV007" device, it typically identifies itself in Windows as an "OEM Device" "SMI Grabber Device" once correctly installed. Key Driver Features & Technical Specifications Dual Video Input Support : Supports capturing from both Composite (RCA) Global Video Standards : Compatible with both video formats. Capture Resolution : 720 x 576 at 25 fps. : 720 x 480 at 29.97 fps. Native 64-bit Compatibility

: While the drivers are often dated (e.g., version 2.1.1.2 from 2011), the 64-bit version is fully compatible with Windows 10 and Windows 11. Software Integration : Works with standard Windows capture software like OBS Studio VLC Media Player Windows 10 Compatibility Requirements EasyCap / Easier Cap (usbtv007) Drivers and Installation

Getting the (often sold as EasyCap or Easier Cap) to work on Windows 10 64-bit

can be tricky because many of these devices rely on older Windows 7 drivers. Quick Setup Guide for Windows 10 (64-bit) Download the Drivers

: You typically need the Windows 7 64-bit driver files, which are compatible with Windows 10. Sources like Visser I/O or specialized repositories on host these legacy files. Manual Installation via Device Manager

Plug in your device. It will likely appear as "usbtv007" or an "Unknown Device". Right-click the device and select Update Driver Browse my computer for drivers

Navigate to your extracted driver folder (ensure you select the subfolder). Confirm Recognition

: Once installed, the device should appear under "Sound, video and game controllers" as OEM Device SMI Grabber Device Important Troubleshooting Tips Core Isolation : On newer versions of Windows 10/11, you may need to disable Core Isolation (Memory Integrity)

in your security settings for these unsigned or older drivers to function. Driver Signature Enforcement

: If Windows blocks the install, you might need to temporarily disable Driver Signature Enforcement Capture Software : After the driver is set up, most users find success using OBS Studio VLC Media Player

to actually view and record the video. In OBS, add it as a "Video Capture Device" and set the Video Standard (e.g., PAL or NTSC) according to your source. USB Interference

: Using a USB extension cable to move the device away from the computer case can sometimes reduce video interference. Are you planning to use OBS Studio

The USBTV007 driver is a critical software component for a common "clone" of the EasyCap video capture device, used to convert analog signals from VCRs, camcorders, or retro gaming consoles into a digital format. While the hardware is inexpensive and widely available, users on Windows 10 64-bit frequently face compatibility hurdles because the original drivers were often designed for older operating systems like Windows 7. Bridge Between Eras

The USBTV007 (often manufactured by Fushicai or Somagic) serves as a bridge for legacy media. For enthusiasts digitizing VHS tapes or monitoring FPV (First Person View) drone feeds on a laptop, this driver is the only way for modern Windows kernels to communicate with the device's specific chipset. Without the correct 64-bit driver, the device typically appears as an "Unknown Device" or "SMI Grabber" with a yellow exclamation mark in the Device Manager. Installation on Windows 10 64-bit

Because official support for these generic devices is often non-existent, the community has developed a standard "force-install" method for Windows 10:

Driver Procurement: Users must often source the UTV007_Drivers.zip from community archives, as the driver CDs included with the hardware are frequently corrupt or incompatible.

Manual Update: Rather than using an installer, you typically right-click the device in Device Manager, select "Update Driver," and manually point Windows to the Win7_64 folder within the extracted driver files.

Security Bypass: On newer versions of Windows 10 (and Windows 11), users may need to disable Core Isolation (Memory Integrity) in the Windows Security settings to allow these older, unsigned drivers to initialize. Performance and Limitations

Even with a solid driver installation, the USBTV007 is a budget solution with known limitations.

Video Quality: It typically captures at standard definition (PAL or NTSC) and can suffer from interlace artifacts unless software like OBS Studio is used to apply deinterlacing filters.

Interference: Because the hardware often lacks proper shielding, using a USB extension cable is recommended to move the device away from the computer’s electromagnetic noise to reduce video static.

Audio Issues: Some users find the built-in audio hardware poor or "unusable," often choosing to route audio through the PC's line-in port instead of the EasyCap's RCA inputs. Usbtv007 Driver Windows 10 64 Bit

Ultimately, the USBTV007 driver for Windows 10 64-bit is a testament to the longevity of analog hardware. Despite being technically "legacy," it remains a functional, low-cost gateway for preserving old memories, provided the user is willing to navigate a manual installation process.

Title: Bridging the Legacy Gap: Understanding and Installing the Usbtv007 Driver on Windows 10 64-Bit

In the era of digital streaming and high-definition capture cards, the need to interface older analog technology with modern computers remains a surprisingly common requirement. Whether it is digitizing a collection of family VHS tapes, setting up a retro gaming capture system, or simply connecting an old camcorder, many users turn to inexpensive USB video capture devices. Among the most prevalent chipsets used in these devices is the usbtv007. However, for users running modern operating systems, specifically Windows 10 64-bit, getting these devices to function can be a frustrating exercise in troubleshooting. Understanding the usbtv007 driver ecosystem requires a look at hardware compatibility, the evolution of Windows architecture, and the resourcefulness of the open-source community.

The usbtv007 chipset, often found in "EasyCAP" style USB 2.0 video grabbers, was originally designed for an era when 32-bit operating systems were the standard. These devices were mass-produced, often without consistent branding, making them a cheap solution for analog-to-digital conversion. The primary challenge for Windows 10 64-bit users lies in the fundamental shift in operating system architecture. 64-bit versions of Windows require digitally signed drivers—a security feature designed to prevent system instability and malware. The original manufacturers of the usbtv007 chipset frequently ceased operations or stopped updating their drivers before Windows 10 was released, leaving their legacy drivers unsigned or incompatible with the new security protocols. Consequently, simply plugging the device in often results in the hardware being recognized as an "Unknown Device" or failing to start entirely.

For the average user, the journey to enable a usbtv007 device on Windows 10 64-bit usually begins with the realization that the included CD-ROM is obsolete. The solution is rarely found in a simple, official "download" button on a manufacturer's website. Instead, users must often rely on the collective efforts of the tech community. Various forums and driver repositories host modified driver packages that have been tweaked to function on 64-bit architecture. A common workaround involves using the driver for the "SM-USB 007" or specific variants of the EasyCAP driver that have been reverse-engineered. In some cases, users must navigate the murky waters of installing drivers that lack the strict digital signature Windows demands, a process that requires booting Windows into "Advanced Startup" mode to disable driver signature enforcement—a daunting task for the uninitiated.

Alternatively, the narrative of the usbtv007 driver highlights a different path: open-source software. One of the most robust solutions for this hardware on Windows 10 is not a driver in the traditional sense, but a software suite called "OBS Studio." OBS, widely used for streaming, has built-in support for many generic capture cards. By utilizing the "Video Capture Device" source, OBS can often bypass the need for a proprietary driver interface by communicating directly with the hardware using standard DirectShow protocols. Additionally, projects like "usbtv" on GitHub provide open-source drivers maintained by enthusiasts who keep the hardware alive long after the original vendors have abandoned it. This demonstrates the resilience of open-source ecosystems in bridging the gap between legacy hardware and modern software.

In conclusion, the usbtv007 driver situation on Windows 10 64-bit serves as a case study in hardware obsolescence and software longevity. While the device offers a valuable bridge to the past,

Finding the right driver for the USBTV007 (often sold as an EasyCap video grabber) on Windows 10 64-bit can be tricky because there is no single "official" website for these generic devices. 📥 Recommended Driver Sources

Since these devices are made by various manufacturers (like Fushicai or SMI), you often have to rely on community-verified archives:

GitHub (Verified Repository): The EasyCap-SM-USB-007-Windows-10-x64-drivers repository contains the necessary .inf files specifically for 64-bit systems.

DriverScape: You can find the SM-USB 007 driver (Version 1.0.8.28) which supports Windows 10 64-bit on DriverScape.

Visser I/O Archive: This site hosts a comprehensive list of EasyCap drivers, including the UTV007 and SMI Grabber versions. 🛠️ How to Install (Step-by-Step)

If you have an "Unknown Device" in your Device Manager, follow these steps to force the installation: Identify your Hardware ID: Open Device Manager.

Right-click the unknown device (often labeled SM-USB 007) and select Properties.

Go to the Details tab and select Hardware Ids. Look for USB\VID_1B71&PID_3002 (this confirms it is a UTV007 chip).

Download and Extract: Download the ZIP file from one of the sources above and extract it to your desktop. Manual Driver Update: Right-click the unknown device in Device Manager again. Select Update driver > Browse my computer for drivers. Point it to the extracted folder.

If it still doesn't work, right-click the .inf file (e.g., SmiUsbGrabber3C.inf) inside the folder and select Install.

Check Results: The device should now appear under Sound, video and game controllers as "SMI Grabber Device" or "OEM Capture". 💡 Pro Tips for Best Performance

Software Choice: The drivers usually don't come with viewing software. Most users use the free OBS Studio or VLC Media Player to view and record the video signal.

Video Standard: Ensure you set the correct video standard (PAL for UK/Europe, NTSC for USA/Japan) in your capture software settings to avoid black-and-white or flickering video.

USB Power: These devices can be heavy; plugging them into a front-panel USB port can sometimes lead to loose connections. Use a rear motherboard port for better stability. USBTV007 driver for Windows 10 (64-bit) enables the

🌟 Note: Always create a System Restore Point before installing manual drivers to ensure you can revert if the driver is incompatible with your specific version of Windows 10.

Are you getting a specific error code (like Code 10 or Code 28)?

What device are you trying to connect (VCR, Camcorder, etc.)? samuelcarreira/EasyCap-SM-USB-007-Windows-10-x64-drivers

The USBTV007 driver is essential for using the Fushicai USBTV007

video capture adapter (commonly known as an EasyCap clone) on Windows 10 64-bit. This device allows you to digitize analog video from sources like VCRs and camcoders by converting RCA or S-Video signals into a digital format. Key Driver Features

Compatibility: Supports Windows 7, 8, 8.1, 10, and 11 in both 32-bit and 64-bit architectures.

Video Formats: Capable of capturing both PAL and NTSC standards at resolutions up to 720x480.

Recognition: Once correctly installed, the device is typically listed in the Device Manager as an "OEM Device" or "SMI Grabber Device". How to Install on Windows 10 64-Bit

Since this is legacy hardware, Windows often fails to detect it automatically. Follow these manual steps: EasyCap / Easier Cap (usbtv007) Drivers and Installation

To get the (EasyCap) driver working on Windows 10 64-bit , you often need to manually point Windows to older drivers, as there is no "official" modern installer for many of these devices. Driver Easy 1. Download the Driver

Since manufacturers vary, you can find compatible 64-bit drivers from community-vetted sources: GitHub Repository : A dedicated Windows 10 x64 Driver Pack for the SM-USB 007 chip. Archive.org EasyCap DC60 (UTV007) Driver collection. DriverScape : Specific versions for Usbtv007 on Windows 10 2. Installation Steps

Windows might not recognize the device automatically. Follow these steps to install it manually: Extract the Files

: Unzip your downloaded driver folder to an accessible location like your Desktop. Open Device Manager : Right-click the button and select Device Manager Locate the Device : Look for an "Unknown Device" or "usbtv007" under Other devices (often marked with a yellow warning triangle). Update Driver Right-click the device and select Update driver "Browse my computer for drivers"

Navigate to the extracted folder. If there are subfolders, select the Confirm Recognition : Once installed, the device should appear as "OEM Device" "SMI Grabber Device" under "Sound, video and game controllers". 3. Troubleshooting & Configuration

To install the USBTV007 (EasyCap) driver on Windows 10 64-bit, you generally need to manually point Windows to the Windows 7 64-bit

driver files, as modern Windows versions may not recognize the device automatically. Once correctly installed, the device typically appears as "SMI Grabber Device" or "OEM Device" in your system. Step-by-Step Installation Guide Download Driver Files

Since there is no official manufacturer website, you must use community-verified drivers. Reliable sources include GitHub (samuelcarreira) or independent tech blogs like Scott Danesi Download and file to a folder on your desktop. Connect Device Plug the EasyCap adapter into a USB port on your computer. Open Device Manager Right-click the Start button and select Device Manager Look for an "Unknown Device" or a device labeled SM-USB 007 (often under "Other devices" with a yellow warning icon). Manually Update Driver Right-click on the device and select Update driver "Browse my computer for drivers"

"Let me pick from a list of available drivers on my computer" or browse directly to the folder you extracted earlier. Crucial Step : Navigate specifically to the

folder within the extracted files. Windows 10 is compatible with these 64-bit Windows 7 drivers. Verify Installation If successful, the device should now be listed under Sound, video and game controllers "SMI Grabber Device" "OEM Device" Recommended Software

After the driver is active, you will need software to view or record the video feed: OBS Studio

: Highly recommended for modern systems. Add a "Video Capture Device" source and select the OEM device. : Good alternatives for simple viewing. Download the open-source driver from a trusted GitHub

: Often included with the original CD, though it may be dated. Troubleshooting Common Issues Code 28 Error

: This means the driver isn't installed. Repeat the manual update steps above. Black Screen/No Audio

: Ensure you have selected the correct Video Standard (e.g., ) in your software settings to match your input source. Privacy Settings Windows Settings > Privacy > Camera

and ensure that "Allow apps to access your camera" is turned , otherwise software like OBS cannot see the video feed. OBS Studio specifically to start capturing your video tapes? EasyCap / Easier Cap (usbtv007) Drivers and Installation

Installing the USBTV007 driver for Windows 10 (64-bit) is essential for users of the popular "EasyCap" video capture dongle. Because "EasyCap" is not a specific brand but a generic name for devices using various chipsets, finding the correct driver depends entirely on identifying your hardware as the UTV007 (often labeled as SMI-USB 007). Identifying Your USBTV007 Hardware

Before downloading, verify that your device uses the UTV007 chipset: Plug the device into your PC. Right-click Start and select Device Manager.

Look for "USBTV007," "SM-USB 007," or an "Unknown Device" under Other Devices.

Right-click the device, go to Properties > Details, and select Hardware IDs. Look for USB\VID_1B71&PID_3002, which confirms it is the UTV007 model. How to Install USBTV007 Driver on Windows 10 (64-Bit)

Windows 10 often fails to find this driver automatically. You can manually install it using compatible Windows 7 64-bit drivers, which are known to work with Windows 10.

Download the Driver: Source the driver files from reliable repositories like Driver Scape or community-hosted links such as those on Scott Danesi's blog.

Extract the Files: Unzip the downloaded folder to a location on your desktop. Update Driver in Device Manager:

Right-click your device in Device Manager and select Update Driver. Choose "Browse my computer for drivers".

Navigate to the extracted folder. Specifically, look for a subfolder labeled "win7_64" or similar.

Confirm Installation: Windows may warn you that the driver is unsigned or old; select "Install this driver software anyway".

Verify Recognition: Once finished, the device should appear as "OEM Device" or "SMI Grabber Device" under Sound, video and game controllers. Recommended Capture Software

The software bundled on the original mini-CD is often outdated and difficult to use on modern systems. Instead, use:

Here is informative content regarding the USBTV007 driver for Windows 10 (64-bit). This chipset is commonly found in low-cost analog video capture devices (e.g., EasyCAP, Honestech, no-name USB dongles).

2. The "Usbtv007" Fushicai Driver Solution

If your hardware ID matches the Fushicai chipset (VID_534D), you have a device that is natively supported by newer versions of Windows, but the driver often fails to install automatically via Windows Update.

Troubleshooting Common Issues

Despite correct installation, the Usbtv007 Driver Windows 10 64 bit can behave strangely. Here is the painkiller for the most frequent complaints:

Step-by-Step Installation (Windows 10 64-bit)

Download the open-source driver from a trusted GitHub repository (e.g., usbtv007-driver).
Extract the ZIP file.
Disable Driver Signature Enforcement (temporarily):
- Restart PC → Advanced Startup → Disable driver signature enforcement.
- Or use test mode (bcdedit /set testsigning on).
Plug in the USBTV007 device.
Open Device Manager → find "Unknown device" or "USBTV007" (yellow exclamation).
Right-click → Update driver → Browse my computer → Point to extracted folder.
If using the installer script, run as Administrator.
After installation, restart PC.

Step 3: Installation (Two Methods)

Part 2: Where to Find the Correct Usbtv007 Driver for Windows 10 64 Bit

Warning: Avoid "driver downloader" websites that ask for payment or require you to install an executable scanner. These are often malware. Use the sources below.

Method 2: Using Zadig (For OBS/VLC Only - Safer & Easier)

Download Zadig (from zadig.akeo.ie).
Plug in your USBTV007 device.
In Zadig, select Options > List All Devices.
From the dropdown, select "USBTV007" (or "Interface 0").
In the target driver field, select WinUSB or libusb.
Click "Install Driver."
Open OBS Studio. Add a "Video Capture Device" – it will now appear as a generic source.

Issue 1: "The hash for the file is not present" (Error 0xE000022F)

Cause: Windows 10's integrity checks reject the driver signature. Solution: You must boot with driver signature enforcement disabled (see Step 2 above). For a permanent fix, enable Test Mode: Open Command Prompt as Admin → bcdedit /set testsigning on → reboot. You'll see a "Test Mode" watermark on the desktop.