Skip to main content

Vupoint Fs-c1-vp-bx2 Windows 10 Driver ((better)) May 2026

Finding a dedicated Windows 10 driver for the VuPoint FS-C1-VP-BX2

is difficult because the device was originally designed for Windows XP and is no longer actively supported by the manufacturer. The Compatibility Issue

Most users find that the scanner is not natively recognized by Windows 10, often resulting in "black frames" or no image preview even if software is installed. The original drivers typically require the bundled ArcSoft software to function. Microsoft Learn Potential Workarounds

If you are determined to use this hardware on a modern system, try these community-recommended steps: Run in Compatibility Mode

: Right-click the original installer file (if you have it), select Properties Compatibility , and choose Windows XP (Service Pack 3) Manual Driver Selection Connect the scanner via USB. Device Manager

Locate the scanner (it may appear as an "Unknown Device" or under "Imaging Devices"). Right-click it and select Update driver Browse my computer for drivers Use Third-Party Software : Specialized scanning software like

often includes its own built-in drivers for older hardware, though users have reported mixed success specifically with this VuPoint model. Virtual Machine vupoint fs-c1-vp-bx2 windows 10 driver

: If all else fails, running a virtual instance of Windows XP (using VirtualBox VMware Player

) is the most reliable way to use the original software and drivers. Do you have the original installation disc , or are you looking for a digital download of the legacy files? Scanner inoperative when used on Windows 10 - Microsoft Q&A

Step 4: Using the Scanner

The VuPoint FS-C1-VP-BX2 usually works in one of two ways:

  1. Mass Storage Mode: If you have an SD card inserted into the scanner, Windows 10 might treat it like a USB thumb drive. You can scan documents to the SD card and then access the files through File Explorer.
  2. TWAIN Interface: If you want to scan directly into software like Paint or Photoshop, you need the driver installed correctly. Open your preferred software, look for "Import from Scanner," and the VuPoint should appear in the list.

How to use Compatibility Mode:

  • Download the driver file (usually a .zip or .exe).
  • Right-click the file and select Properties.
  • Go to the Compatibility tab.
  • Check the box that says "Run this program in compatibility mode for:" and select Windows 7 or Windows 8.
  • Run the installer as Administrator.

Summary of Specifications for this Model

To ensure you have the correct model identification:

  • Model: FS-C1-VP-BX2 (Often referred to as the "Magic Wand")
  • Connection: USB 2.0 (Mini-B port)
  • Resolution: Usually 300 DPI / 600 DPI / 900 DPI selectable.
  • Color Depth: 24-bit Color / Grayscale.
  • Storage: microSD card (not included in many older packages).

The Verdict: Does it work on Windows 10?

Yes, but with specific conditions.

The VuPoint FS-C1-VP-BX2 is a legacy device (originally designed for Windows 7 and Vista). Because it connects via a standard USB interface, it generally functions on Windows 10, but the original software suite provided on the CD is likely outdated. Finding a dedicated Windows 10 driver for the

There are two ways to use this scanner on a modern Windows 10 or Windows 11 computer:

  1. Mass Storage Mode (Plug-and-Play): Using the scanner independently and transferring files via USB (Easiest method).
  2. TWAIN Driver Mode: Installing a driver so the scanner interfaces directly with Windows Fax & Scan or Adobe Acrobat (Requires specific driver).

Method 2: Installing the Driver for Direct Scanning

If you want to control the scanner from your PC (pressing the scan button on the computer screen rather than the physical button on the wand), you need the VuPoint Driver.

The Challenge: VuPoint Solutions does not host legacy drivers prominently on their main site anymore.

Steps to Install on Windows 10:

  1. Download the Driver:

    • Search for "VuPoint FS-C1-VP-BX2 Driver" or visit the official VuPoint Support page.
    • Note: Many users have success using the Windows 7 driver in "Compatibility Mode." If the official link is dead, check third-party driver archives or contact VuPoint support directly at support@vupointsolutions.com.

  2. Install in Compatibility Mode:

    • Download the driver installer (usually a .zip or .exe file).
    • Right-click the installer file and select Properties.
    • Go to the Compatibility tab.
    • Check the box "Run this program in compatibility mode for:"
    • Select Windows 7 from the dropdown menu.
    • Check "Run this program as an administrator."
    • Click Apply, then OK.
    • Run the installer.

  3. Verify Connection:

    • Open the installed software (usually called Magic Wand Portable Scanner or Poto Studio).
    • Connect the scanner via USB and turn it on.
    • The software should detect the scanner.

Troubleshooting Windows 10 Driver Issues:

  • Device Not Recognized: If Windows 10 does not recognize the device when plugged in, try a different USB cable. These older devices use Mini-USB (not Micro-USB), and those cables often fail.
  • TWAIN Support: If you are trying to scan directly into Photoshop or Acrobat, you must ensure the driver installed the TWAIN component. Once installed, your scanning software should list "VuPoint Scanner" as a source.

Step 4: Software for Scanning

The driver alone does not include scanning software. You need an image capture program.

Option A (Recommended): Use Windows Fax and Scan (built into Windows 10).

  • Open Start menu, type "Windows Fax and Scan".
  • Click New Scan.
  • Select your VuPoint scanner from the list.
  • Set your resolution (300 DPI is good for documents, 600 for photos).
  • Click Scan.

Option B: Use NAPS2 (Not Another PDF Scanner 2) – Free and open source.

  • Download NAPS2 from their official website.
  • It automatically recognizes WIA drivers, including this scanner.

1. The VuPoint Solutions Legacy Support Page (Primary Source)

  • Navigate to: vupointsolutions.com → Support → Drivers.
  • Search for “PDS-ST470-VP”. (This is the internal model number for the FS-C1-VP-BX2).
  • Look for the file named: PDS-ST470-VP_Driver.zip or Magic Wand Driver.zip
  • File contents: You should see Setup.exe, TWain_32.dll, and .inf files.