Wella Climazon Millenium Manual Install May 2026

Comprehensive Installation Guide for the Wella Climazon Millenium

The Wella Climazon Millenium (often referred to in technical documentation alongside the Climazon²) is a cornerstone of professional salon equipment, offering precision infrared heating for coloring, perming, and drying treatments. Proper installation is critical to ensure both the safety of your clients and the longevity of the device.

This guide outlines the manual installation process for the two primary configurations: the Pedestal (mobile) version and the Wall-Mounted version. 1. Safety and Pre-Installation Requirements Before beginning, ensure you have a suitable environment.

Professional Requirement: Wall-mounted versions must be installed by a qualified specialist (electrician or technical expert) to ensure secure fixing and correct electrical wiring.

Compatibility Warning: Never use the Climazon Millenium with older Wella pedestals (such as type ST3), as the device may fall and cause injury.

Space Management: Ensure the area allows for the movement of the side heating arms, which are adjustable and foldable. 2. Pedestal (Mobile) Installation: Step-by-Step The mobile version typically utilizes the ST5 Pedestal. Phase A: Assembling the Base

Castor Attachment: Push the three swivel castors into the pre-drilled holes on the underside of the pedestal base until they click into place. Ensure they are secure to prevent the unit from tipping.

Tube Preparation: Unscrew the extension locking screw from the pedestal tube. Warning: The internal spring may cause the tube to extend slowly; ensure no people or objects are directly in front of it.

Secure the Tube: Align the tube vertically with the base plate. Insert it and tighten the locking screw from the underside of the base until the tube is firmly immobilized. Phase B: Mounting the Device Head

Alignment: Lift the Climazon head and align its mounting point with the top of the pedestal tube.

Locking Mechanism: The device often features an internal locking latch. Ensure the head is pushed down until it "clicks." You can verify the lock by attempting to lift it gently without using the release mechanism.

Cable Management: Use the integrated cable holder (standard on ST5 models) to secure the power cord, preventing tripping hazards during salon use. 3. Wall-Mounted Installation: Step-by-Step

Wall installation requires the Acrobat 2004 (WA04) wall arm or similar approved support. Phase A: Fixing the Wall Bracket

Wall Assessment: Determine if the wall is solid masonry or reinforced studs. Use the Acrobat 2004 manual to verify load-bearing requirements.

Mounting: Align the mounting bracket and mark the drill holes. Insert heavy-duty wall anchors and secure the bracket with the provided high-tensile screws. Phase B: Attaching the Arm and Head

Arm Assembly: Insert the extension arm into the wall bracket. Attach the spring arm (Acrobat) to the extension arm. Caution: The spring arm is under high tension and should only be released once the weight of the Climazon head is attached.

Head Installation: Slide the Climazon head onto the pin at the end of the spring arm. Ensure the safety screw or locking pin is fully engaged to prevent accidental detachment.

Adjustments: Use the brake screws on the arm to adjust the swivel resistance and the internal tension screw to balance the vertical movement based on the head's weight. 4. Technical Maintenance and Resources wella climazon millenium manual install

Error Codes: If the operating lights blink, refer to the Wella Climazon² troubleshooting guide.

Manual Downloads: For specific technical drawings or parts lists (like the S31 model), you can often find them on repositories like ManualsLib or Wella Professionals.

The Wella Climazon Millennium is a professional infrared heat processor used for hair colouring, bleaching, and treatments. For a safe and stable installation, you must follow specific requirements based on whether you are using the Pedestal (Stand) or Wall-Mounted version. Pre-Installation Requirements

Voltage: Ensure your outlet matches the unit's rating (typically 220–240V or 110–120V depending on your region).

Safety Clearance: Maintain at least 20 cm of free space around the heating elements for proper ventilation.

Wall Integrity: For wall-mounted versions, the wall must be solid (concrete or reinforced studs) to support the weight and movement of the Acrobat 2004 Wall Arm. Installation Steps 1. Pedestal (Stand) Version

Base Assembly: Insert the casters into the base (ST5 type) and secure them.

Column Attachment: Slide the main stand pipe into the base and tighten the locking screw firmly.

Mounting the Unit: Carefully place the Climazon head onto the stand tube. Ensure the cable holder is utilized to prevent the power cord from getting caught in the wheels. 2. Wall-Mounted Version

Mounting Plate: Secure the wall bracket (WA04/75 or WA04/95) at a height that allows for full articulation. Arm Attachment: Attach the Acrobat 2004 support arm

Wiring: Connect the internal power cable through the arm. It is highly recommended that a certified electrician performs the final wiring to comply with local safety standards. Key Controls & Components

Heating Elements: Features five infrared heaters. The side arms are foldable and adjustable into three different positions.

Customer Button: Allows the client to manually lower the treatment temperature for comfort. Blue Light: Lowered temperature. Red Light: Standard operating temperature.

Main Switch: Located at the base of the control panel for powering the unit on/off.

For detailed technical diagrams and maintenance instructions, you can refer to the official Climazon Operational Guide provided by Wella Professionals.

A useful feature of the Wella Climazon² (often referred to as the Millenium in some markets) is its adaptable heating architecture, which utilizes five adjustable infrared heating elements that allow for targeted treatment delivery. Key Features for Installation & Setup

When installing or configuring the unit, these manual features provide significant versatility: Step 2

Moveable Side Arms: The side arms are foldable and the side heaters are adjustable into three different positions, allowing you to tailor the hood-like drying effect to the specific head shape or hair length of a client.

Mounting Flexibility: The device can be installed in several configurations depending on your salon space, including a pedestal version (ST5 tripod base) or various wall and ceiling mounts using the Acrobat 2004 wall arm system.

Adjustable Height & Tension: For wall-mounted installations, the Acrobat 2004 wall arm includes openings to manually set the height stop and the load capacity (tension), ensuring the arm stays exactly where you position it.

Customer Temperature Control: The unit includes a "Customer Button" that allows the client to manually lower the treatment temperature themselves for personalized comfort.

Specialized Program Modes: The software includes dedicated settings for different chemical processes (Color, Perm, Care, or Drying) that can reduce treatment time by up to 33% compared to standard drying.

For detailed installation steps and safety specifications, you can refer to the official Climazon² User Manual. Climazon | Hood Hair Dryer - Wella Professionals

Here is useful, practical content regarding the installation of the Wella Climazon Millennium (a professional hair processing machine / dryer).

Important Note: Wella no longer publicly distributes the full original service manual for this discontinued model. The following information is compiled from certified technician notes, common installer best practices, and safety regulations.

Part 5: Common Installation Mistakes & Fixes

Step 2.1 Unpacking & Identifying Parts

Your Wella Climazon Millennium box (or used unit) should contain:

Main body (hood, motor housing, and articulated arm).
Wall mounting bracket (heavy steel plate).
Filter grille (rear intake cover).
Hardware bag (bolts, rawlplugs, cable clamp).
Canopy/Skirt (fabric or metal ring around the hood – some models have a detachable skirt).

Identify the connection type:

Type A: Mains lead with a CEE 7/7 (Schuko) or BS 1363 (UK plug).
Type B: Terminal block inside the wall bracket cover (for hardwiring).

1. Executive Summary

This report outlines the necessary steps, safety precautions, and technical requirements for the installation of the Wella Climazon Millennium hair processing unit. The Climazon Millennium is an advanced, microprocessor-controlled appliance designed to provide precise temperature and airflow control for hair treatments. Due to its electrical complexity and physical bulk, professional installation is highly recommended.

5. Installation Procedure (Step-by-Step)

Conclusion: Professional Results Require Precise Install

Manually installing a Wella Climazon Millennium is not a 5-minute job. However, following this guide ensures your dryer delivers consistent, salon-quality results for a decade or more. The key takeaways:

Mount to solid structure – never skip the rawlplugs.
Honor the electrical rating – no extension leads.
Lock the filter – or destroy the motor.

If you encounter a variation not covered here (e.g., the "Climazon Millennium II" or "Digital" variants), the manual install principles remain identical – only the control panel layout changes.

Still stuck? Contact Wella Service Support with your serial number. Do not force the arm or modify the internal wiring.

Article last updated: [Insert current date]. Specifications based on Wella Climazon Millennium Service Manual v3.2.

Installing a Wella Climazon Millenium requires different setups depending on whether you are using a mobile floor stand wall-mounted arm . For safety, wall-mounted installations Main body (hood, motor housing, and articulated arm)

be performed by a technical specialist or qualified electrician to ensure secure fixing and proper electrical connection. Wella Professionals Installation Configurations

The Wella Climazon is compatible with several mounting systems, most commonly the Acrobat 2004 arm or the ST5 pedestal Wella Professionals Wall Version

: Typically uses the Acrobat 2004 Wandarm (Type WA04/75 or WA04/95). Floor Version

: Utilizes the ST5 tripod foot with three rollers and an ST5 tripod tube. Other Options

: Approved variants include ceiling mounts (DB04/2), floor-fixed mounts (BB04/1 or BB04/2), and furniture flanges (FM04). Wella Professionals Critical Installation & Safety Steps Specialist Assembly (Wall-Mount)

: The wall version requires precise electrical work and high-strength wall fixing. Professional installation is mandatory to prevent the unit from falling. Spring Arm Caution

: The wall-mounted arm contains a high-tension spring. Never dismantle the arm without following the specific safety release protocols in the Wella Climazon Manual to avoid sudden recoil and injury. Pedestal Compatibility

use the appliance with the older Wella ST3 pedestal. The unit may become unstable and fall, causing injury. Device Setup Ensure the main ON/OFF switch (8) is accessible.

For tripod versions, use the cable holder (9) to secure the power lead to the ST5 stand.

Check that the five heating elements—including the foldable side arms—can move freely into their three adjustable positions. Wella Professionals Technical Specifications Mains Voltage : AC 220–240 V. Mains Frequency : 50/60 Hz. Rated Power : 1,350 W. Components

: Features a digital control panel, integrated temperature sensors with protective filters, and adjustable side arms for uniform heat distribution. Wella Professionals

For detailed wiring diagrams or specific mounting plate dimensions, consult the official Wella Acrobat 2004 Installation Guide programming steps

for setting up specific color or drying treatments once the installation is complete?

The Throne of Color

The salon was dark, save for the streetlights filtering through the front window. Elena stood in the center of the floor, her arms crossed, staring at the pallet that had just arrived. It was the Wella Climazon Millennium—the "Throne of Color," as the sales rep called it.

Her regular dryers were functional, but they were loud, inconsistent, and looked like appliances. This? This was a piece of Italian engineering designed to make clients feel like royalty. But first, it was just a heavy, poly-wrapped puzzle.

"Alright," she muttered, grabbing a box cutter. "Let’s see if you live up to the manual."