Wis09abgn Driver Windows 10 Fixed Official

The Samsung WIS09ABGN LinkStick is a dual-band wireless USB 2.0 adapter originally designed for 2009–2011 Samsung Smart TVs and Blu-ray players. While it was intended as a proprietary TV accessory, many users have discovered that its underlying hardware—the Ralink RT2850/RT2870 chipset—makes it a highly capable Wi-Fi adapter for modern PCs.

Getting the WIS09ABGN driver to work on Windows 10 requires a bit of manual effort because Samsung does not provide official PC drivers for this device. How to Install WIS09ABGN Driver on Windows 10

Because Windows 10 may not automatically recognize the LinkStick as a network adapter, you must "force" it to use compatible drivers. The most reliable method is to use the built-in Windows driver for the Linksys WUSB600N, which shares the same internal chipset.

Plug in the Adapter: Insert the Samsung LinkStick into a USB 2.0 or 3.0 port on your PC.

Open Device Manager: Right-click the Start button and select Device Manager.

Identify the Device: Look for an item under "Other devices" or "Network adapters" labeled 802.11 n WLAN or similar with a yellow exclamation mark.

Update Driver: Right-click the device and select Update driver.

Manual Selection: Choose Browse my computer for driver software, then select Let me pick from a list of device drivers on my computer.

Find the Manufacturer: Scroll down the list of device types and select Network adapters. Select Compatible Driver: In the Manufacturer column, select Linksys.

In the Model column, look for Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2.

Note: If you don't see it, uncheck "Show compatible hardware" to see the full list.

Confirm Installation: Windows will warn you that the driver might not be compatible. Click Yes to proceed.

Restart: Once the installation is complete, your adapter should now appear as a functional Linksys WUSB600N in your network settings. Alternative Driver Sources

If the built-in Windows drivers do not work, you can download third-party driver packages that specifically target the Ralink chipset used in the WIS09ABGN. Go to product viewer dialog for this item.

Wis09 Abgn Wireless Linkstick Wis09 Abgn2 Usb Lan Adapter For Samsung 2009 2010 & 2011 Blu Ray Players

The Samsung WIS09ABGN LinkStick is a proprietary wireless LAN adapter originally designed for 2009–2010 Samsung HDTVs and Blu-ray players. While Samsung officially states the device is proprietary and not intended for PC use, it is based on the Ralink RT2850 chipset, making it compatible with Windows 10 through specific manual driver installations. Driver Compatibility & Availability

Official Samsung support pages for this model typically focus on TV/Blu-ray firmware rather than Windows drivers. However, third-party sources provide drivers that enable Windows 10 functionality:

Chipset Identification: The device is a Ralink RT2850-based adapter.

Compatible Drivers: It can successfully use drivers for the Linksys WUSB600N v2, which shares the same internal hardware. Download Sources:

Third-party repositories like Driver Scape list specific Windows 10 (32-bit and 64-bit) versions of the Samsung WLAN USB Stick driver.

DriverIdentifier provides versions tested on various Samsung laptops running Windows 10. Manual Installation Guide for Windows 10

Because Windows 10 may not automatically recognize the WIS09ABGN, you often need to force the installation using the "Have Disk" method:

Download and Extract: Obtain the Ralink RT2850 or Linksys WUSB600N v2 drivers and unzip them to your desktop.

Open Device Manager: Right-click the Start button and select Device Manager.

Locate Device: Look for "802.11 n WLAN" under Other devices.

Update Driver: Right-click it, select Update Driver > Browse my computer for driver software > Let me pick from a list of device drivers on my computer.

Force Install: Click Have Disk, browse to your extracted folder, and select the .inf file (e.g., netr28u.inf).

Select Model: Choose "Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2" from the list and ignore any compatibility warnings. Key Specifications

The Samsung WIS09ABGN LinkStick is a wireless USB 2.0 adapter originally designed to give 2009–2010 Samsung TVs and Blu-ray players Wi-Fi capabilities. While Samsung officially considers it a proprietary device for home theater equipment, it is built on the Ralink RT2850 chipset, making it technically possible to use on Windows 10 with the right drivers. 🌐 Key Hardware Features

Dual-Band Support: Operates on both 2.4GHz and 5GHz frequencies.

Wi-Fi Standards: Compatible with IEEE 802.11a/b/g and 802.11n (Draft 2.0).

Transfer Speeds: Supports data rates up to 54 Mbps on older standards, with higher throughput on 802.11n.

Security: Supports 64/128bit WEP, WPA, and WPA2 encryption protocols.

Form Factor: Compact USB stick with an included right-angle adapter for tight spaces (like wall-mounted TVs). 🖥️ Windows 10 Driver Compatibility wis09abgn driver windows 10

Official Windows 10 drivers for this specific model are not hosted on the main Samsung support site, as the device was not intended for PCs. However, because it uses the Ralink RT2850 (or similar RT2870) chipset, you can use generic or alternative drivers:

Ralink/MediaTek Drivers: The most reliable method is to find drivers for the Ralink RT2850 chipset, often available through third-party repositories like Driver Scape which lists versions supported for Windows 10 64-bit.

Linksys Alternative: The adapter is hardware-identical to the Linksys WUSB600N v2. Windows 7/8 drivers for the WUSB600N can often be manually installed on Windows 10 via Device Manager. Manual Installation: Plug the stick into your PC. Open Device Manager.

Right-click the "802.11 n WLAN" (or Unknown Device) and select Update Driver.

Choose "Browse my computer" and point to the folder containing unzipped Ralink or Linksys drivers. ⚠️ Limitations & Performance

Legacy Hardware: As a 2009 device, it lacks modern Wi-Fi 6/6E features and may struggle with high-bandwidth 4K streaming compared to modern $20 adapters.

Official Stance: Samsung technicians typically state there is "no software for using it on a PC," so any Windows 10 setup is a community-driven workaround.

Stability: Users report mixed results; while it can work, it may occasionally drop connections on newer builds of Windows 10 if using older Windows 7-era drivers. Specification Interface Chipset Ralink RT2850 Frequency 2.4 GHz / 5 GHz Max Speed 300 Mbps (Theoretical n) Compatibility TV, Blu-ray, PC (Manual)

Samsung WIS09ABGN LinkStick is a wireless USB adapter originally designed for 2009–2011 Samsung Smart TVs and Blu-ray players. To use it on Windows 10

, you must manually install drivers because it is a proprietary device that Windows may not recognize automatically. Recommended Driver Solution The WIS09ABGN uses the Ralink RT2850 chipset

. You can often get it working by using compatible drivers for the Linksys WUSB600N v2 , which uses the same hardware. Step-by-Step Installation for Windows 10 Download Drivers : Locate and download the Linksys WUSB600N v2

drivers for Windows 7 or Vista (the 64-bit version is required for 64-bit Windows 10). Extract Files : Unzip the driver folder to your desktop. Open Device Manager : Right-click the button and select Device Manager Identify Device : Look for 802.11 n WLAN (often under "Other devices"). Update Driver Right-click the device and select Update Driver "Browse my computer for driver software" "Let me pick from a list of device drivers on my computer" and browse to the extracted folder on your desktop. Select the INF File

: Open the folder matching your system (32-bit or 64-bit) and select the netr28u.inf Confirm Device

"Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2" from the list. Ignore Warning : Windows may warn about compatibility; click to proceed with the installation. Troubleshooting Tips

Samsung WIS09ABGN Driver for Windows 10: Installation and Setup Guide Samsung WIS09ABGN (LinkStick)

is a dual-band wireless LAN adapter originally designed for 2009–2010 Samsung Smart TVs and Blu-ray players. However, because it uses the standard Ralink RT2850 chipset, it is also compatible with Windows 10 PCs.

While Samsung does not provide a dedicated Windows 10 installer for this legacy device, you can successfully use it by following these installation methods. 1. Direct Driver Downloads

Several third-party repositories host the specific 802.11n WLAN drivers required for the Go to product viewer dialog for this item. to work on modern Windows systems:

DriverScape: Offers versions 4.00.10.0000 for Windows 10 64-bit and older versions for 32-bit systems.

DriverIdentifier: Provides a compatible 802.11 USB Wireless LAN Adapter driver specifically for SAMSUNG hardware on Windows 10. 2. Manual Installation via Device Manager (Recommended) If Windows does not automatically recognize the

, you can manually point it to the correct driver files using a "Have Disk" installation. Plug in the adapter: Insert the into a USB 2.0 or 3.0 port.

Open Device Manager: Right-click the Start button and select Device Manager.

Locate the Device: Look for "802.11 n WLAN" under Other devices or Network adapters. It may have a yellow exclamation mark.

Update Driver: Right-click the device and select Update driver > Browse my computer for driver software.

Manual Selection: Choose Let me pick from a list of device drivers on my computer, then click Have Disk.

Select the .inf File: Browse to the folder where you extracted your downloaded driver and select the relevant .inf file (e.g., netr28u.inf).

Finalise: Choose a compatible model from the list (such as "Linksys WUSB600N Wireless-N" which shares the same chipset) and click Next to install. 3. Chipset Compatibility Workaround

is internally a Ralink RT2850-based adapter, drivers for the Linksys WUSB600N v2

are known to work perfectly as a substitute. If you cannot find a "Samsung" branded driver, downloading the Linksys WUSB600N v2

drivers for Windows 7/8 and installing them in Windows 10 is a reliable alternative. Specifications & Features Standard: IEEE 802.11a/b/g and 802.11n.

Security: Supports 64/128-bit WEP, WPA, and WPA2 encryption. Dual-Band: Operates on both 2.4GHz and 5GHz frequencies.

Note: For modern high-speed internet, consider newer alternatives like the TP-Link Archer T3U Plus Go to product viewer dialog for this item.

which offers native Windows 10/11 support and much faster Wi-Fi 5 (AC1300) speeds. The Samsung WIS09ABGN LinkStick is a dual-band wireless

Samsung WIS09ABGN LinkStick, originally designed for TVs and Blu-ray players, does not have an official Windows 10 driver from Samsung. However, you can use it on Windows 10 by manually installing drivers for the Ralink RT2850 Linksys WUSB600N v2 , which share the same internal chipset. Step 1: Identify and Download Drivers

Since the device is proprietary, Windows will likely list it as an "802.11 n WLAN" or "Other Device" in Device Manager. You should look for drivers compatible with the following: Linksys WUSB600N v2 This is the most reliable alternative driver. Ralink RT2870 The generic chipset drivers often work. You can find these on manufacturer support sites like or via third-party repositories like Driver Scape Step 2: Manual Installation Guide

If the device is not automatically recognized, follow these steps to force the driver installation: Open Device Manager: Right-click the button and select Device Manager Locate Adapter: Find the device under "Other devices" (usually named 802.11 n WLAN ) or "Network adapters". Update Driver: Right-click the device and select Update driver Browse Manually: "Browse my computer for drivers"

"Let me pick from a list of available drivers on my computer" Select Manufacturer: Scroll down and select "Linksys, a division of Cisco systems" "MediaTek/Ralink" "Show compatible hardware" if necessary to see the full list. Pick the Model: Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter Confirm Installation:

. If a warning appears stating the driver might not be compatible, click to continue. Windows will complete the installation. Troubleshooting Tips

While Samsung officially describes the WIS09ABGN LinkStick Wireless LAN Adapter Go to product viewer dialog for this item.

as a proprietary device for 2009–2011 TVs and Blu-ray players, it is technically a Ralink RT2850-based or RT2870-based 802.11 adapter. Because of this shared chipset, you can use third-party drivers to get it working on Windows 10. Recommended Driver Sources

Generic Ralink/MediaTek Drivers: The most reliable path is using generic drivers for the Ralink RT2870

chipset, as MediaTek (who acquired Ralink) has published versions compatible with Windows 10.

Third-Party Repositories: Sites like DriverScape host specific "Samsung WLAN USB Stick" drivers that list explicit support for Windows 10 (32-bit and 64-bit). Linksys Alternative: Some users have successfully used the Linksys WUSB600N v2 driver, which uses the same internal hardware. How to Install on Windows 10

If Windows does not automatically recognize the device, follow these manual steps to force the driver installation:

The Samsung WIS09ABGN LinkStick is an older dual-band wireless USB adapter primarily designed for Samsung Smart TVs and Blu-ray players. While it was not originally marketed for PCs, it is widely considered a "hidden gem" by tech enthusiasts because it uses the high-quality Ralink RT2850 chipset, which is highly compatible with Windows 10 through manual workarounds.  Performance Review 

Dual-Band Support: Unlike many budget adapters of its era, it supports both 2.4GHz and 5GHz frequencies.

Legacy Reliability: Users report it can outperform modern budget adapters in short-range environments, though it may struggle with signal strength in very large homes compared to newer Wi-Fi 6 hardware.

Plug-and-Play (TVs): For Samsung TVs (2009–2012 models like the B, C, D, and E series), it requires no setup.  Windows 10 Compatibility & Driver Installation 

The WIS09ABGN does not have official Windows 10 drivers from Samsung. However, it is functionally identical to the Linksys WUSB600N v2, and those drivers can be used to make it work on Windows 10/11.  Manual Installation Guide for Windows 10 

If Windows does not automatically recognize the device, follow these steps to use the Linksys alternative: 

Download Drivers: Locate drivers for the Linksys WUSB600N v2 (even Vista/Windows 7 versions work).

Open Device Manager: Right-click the Start button and select Device Manager.

Find the Device: Look for "802.11 n WLAN" under Other devices. Update Driver: Right-click the device and select Update driver. Choose "Browse my computer for driver software".

Select "Let me pick from a list of device drivers on my computer". Choose the Model:

Click Have Disk and browse to your downloaded driver folder.

From the list, select "Linksys WUSB600N Wireless-N USB Adapter with Dual-Band ver. 2".

Ignore any compatibility warnings; users confirm this "cross-flashing" works reliably on Windows 10 as recently as 2024.  Known Limitations 

Driver Scarcity: Samsung’s official support site for these drivers is largely offline, making third-party archives or Linksys drivers necessary.

Bulkiness: The physical size of the stick may block adjacent USB ports; the original package often included a right-angle adapter to mitigate this. 

Installing and Updating the WIS09ABGN Driver on Windows 10

The WIS09ABGN driver is a software component that enables communication between your computer and a wireless network adapter, specifically the WIS09ABGN wireless network card. If you're experiencing issues with your wireless connection or have upgraded to Windows 10, you may need to install or update the WIS09ABGN driver. In this article, we'll guide you through the process.

Why Update the WIS09ABGN Driver?

Updating the WIS09ABGN driver can resolve various issues, including:

• Connectivity problems
• Slow wireless speeds
• Intermittent disconnections
• Incompatibility with Windows 10

Methods to Install or Update the WIS09ABGN Driver

Summary

The wis09abgn driver issue on Windows 10 stems from outdated Ralink hardware lacking native Microsoft support. While you can get it working by manually installing the legacy Ralink RT3090 driver (version 5.x), success depends on your Windows 10 build and architecture. For a permanent, hassle-free solution, upgrading your wireless hardware is strongly recommended.

Quick fix checklist:

• [ ] Try Windows Update driver search.
• [ ] Manually install Ralink RT3090 driver (v5.0.37.0).
• [ ] Use compatibility mode for Windows 7 driver.
• [ ] Disable driver signature enforcement if needed.
• [ ] Replace the adapter as a last resort.

With the right approach, that mysterious wis09abgn can once again connect to your Wi-Fi—but don’t expect flawless performance under Windows 10.

Have a different hardware ID or still stuck? Leave the full ID from Device Manager (PCI\VEN_...) in a comment (imaginary) and I can help you find the exact driver.

Title: Installing and Troubleshooting the WI-S09ABGN Driver on Windows 10

Introduction:

The WI-S09ABGN is a wireless network adapter that allows users to connect their computers to wireless networks. For the adapter to function properly on a Windows 10 system, the correct driver must be installed. Drivers are software components that enable the operating system to communicate with hardware devices. In this article, we will guide you through the process of installing and troubleshooting the WI-S09ABGN driver on Windows 10.

Installing the WI-S09ABGN Driver on Windows 10:

1. Download the Driver: The first step is to download the correct driver for your WI-S09ABGN adapter. Visit the manufacturer's website or a trusted driver download site to find the driver compatible with Windows 10. Make sure to select the correct architecture (32-bit or 64-bit) that matches your Windows 10 installation.

2. Open Device Manager: Once the driver is downloaded, open the Device Manager on your Windows 10 system. You can do this by right-clicking on the Start button and selecting "Device Manager" from the menu.

3. Locate Your Adapter: In the Device Manager, look for your WI-S09ABGN adapter. It might be listed under "Network Adapters" or with a yellow exclamation mark if the driver is not installed.

4. Update Driver: Right-click on the adapter and select "Update driver". Then choose "Browse my computer for driver software" and navigate to the folder where you downloaded the driver. Follow the on-screen instructions to complete the installation.

5. Restart Your Computer: After the driver is installed, restart your computer to ensure the changes take effect.

Troubleshooting the WI-S09ABGN Driver on Windows 10:

If you encounter issues with the WI-S09ABGN driver on Windows 10, here are some troubleshooting steps:

1. Update Driver: Ensure you have the latest driver version installed. Outdated drivers can cause compatibility issues.

2. Disable and Re-enable the Adapter: Sometimes, simply disabling and re-enabling the network adapter can resolve connectivity issues. Right-click on the adapter in Device Manager and select "Disable device". Wait a few seconds, then enable it again.

3. Forget Network: If you're having trouble connecting to a specific network, try forgetting the network in your Wi-Fi settings and then reconnecting.

4. Run Network Troubleshooter: Windows 10 comes with a built-in network troubleshooter. Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters > Network Adapter, and follow the instructions.

5. System File Checker: Corrupted system files can cause driver issues. Run the System File Checker tool by opening Command Prompt as Administrator and typing sfc /scannow.

Conclusion:

Installing and maintaining the correct driver for your WI-S09ABGN wireless adapter is crucial for stable and secure network connections on Windows 10. By following the steps outlined in this article, you should be able to successfully install and troubleshoot the WI-S09ABGN driver, ensuring optimal performance of your wireless network adapter.

It sounds like you’ve been through a frustrating hunt for the Wis09abgn driver on Windows 10. That identifier typically points to a Wireless LAN USB adapter using a Realtek RTL8192CU chipset (common in older TP-Link, Edimax, or generic Wi-Fi dongles).

Here’s the short version of the “long story” — and the fix that actually works when Windows Update fails:

Error: "The hash for the file is not present in the specified catalog file"

Why it happens: Windows 10 enforces driver signature enforcement. Legacy Ralink drivers often fail this. Fix:

1. Restart your PC.
2. As soon as the boot screen appears, press F8 repeatedly (or hold Shift while clicking Restart from Windows).
3. Go to Troubleshoot > Advanced Options > Startup Settings > Restart.
4. When the PC restarts, press 7 or F7 to select "Disable driver signature enforcement" .
5. Install the Wis09abgn driver again while in this session.

Method 3: Using a Driver Update Tool

1. Download and install a reputable driver update tool, such as Driver Talent or Driver Easy.
2. Run the tool and scan for outdated drivers.
3. If the WIS09ABGN driver is found to be outdated, follow the tool's instructions to update it.

Troubleshooting Tips

• If you're unable to connect to the internet, try using a USB drive to transfer the driver file to your computer.
• Ensure you're downloading the correct driver for your specific wireless network adapter model.
• If you encounter issues during installation, try uninstalling the existing driver and then reinstalling it.

Conclusion

Updating the WIS09ABGN driver on Windows 10 can resolve various wireless connectivity issues. By following the methods outlined in this article, you should be able to install or update the driver successfully. If you're still experiencing issues, consider seeking further assistance from the manufacturer's support team or a professional technician.

6. Fixing Common Wis09abgn Driver Errors on Windows 10

Error: Device stops working after Windows Update

Windows occasionally overwrites the working driver with a generic Microsoft driver. Solution: In Device Manager, right-click the Wi-Fi adapter > Properties > Driver tab > Roll Back Driver. If grayed out, select Uninstall Device, check "Delete the driver software for this device" , then reinstall the Ralink driver from scratch.

10. Conclusion

The wis09abgn driver for Windows 10 may seem like a relic, but it is fully capable of providing stable Wi-Fi connectivity if you install the correct Ralink-based driver. Do not waste time searching for a "Wis09abgn official website"—no such site exists. Instead, rely on the proven methods outlined above:

1. Let Windows Update pull the legacy Ralink driver.
2. Manually install the RT3070 reference driver via Have Disk.
3. Disable driver signature enforcement if necessary.
4. Adjust power settings to prevent USB disconnects.

If you have tried all methods and the device still fails, it is possible your Wis09abgn hardware has died. However, in 90% of cases, the driver is the culprit. Follow this guide carefully, and you will have your wireless connection restored on Windows 10.

Have a unique issue? Check your Device Manager Hardware ID and search for that VID/PID combination alongside "Windows 10" for a tailor-made driver solution.

Last updated: October 2025. Compatible with Windows 10 21H2, 22H2, and Windows 11 (with compatibility mode).

4) Install the driver

Method A — Standard installer (EXE or MSI)

1. Run the downloaded installer as Administrator (right‑click → Run as administrator).
2. Follow prompts; reboot if requested.
3. After reboot, check Device Manager: device should appear under "Network adapters" with no warning icon.

Method B — Manual install via Device Manager (INF) Methods to Install or Update the WIS09ABGN Driver

1. Extract the downloaded ZIP to a folder.
2. Device Manager → right‑click the unknown device → Update driver → Browse my computer for drivers → Let me pick from a list → Have Disk → Browse to the extracted .inf file → OK → Next.
3. If Windows warns about driver compatibility or unsigned driver, accept/Install if you trust the source (see notes). Reboot if prompted.